ac motor used for sale

Temperature sensor, measuring range - 35 C to + 199 C

Sheet metal support made of aluminium square tube

number: 77 Positionen weight: 146 kg condition: neu : 28 mm Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 36 x 160511 Magnetic bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set. 4: 110 pieces 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 30 x 160511 Magnetic bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of the machine ca.: 0,380 x 0,200 x 0,134 m weight of the machine ca.: 0,024 t power requirement: kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Membrane accumulator, bladder accumulator, pressure accumulator ORSTA 25/16 TGL 10843 capacity 25 L zul. Operating pressure 160 bar zul. Operating temp. 80°C used, tested ! Another 25 L - Membrane accumulator from ORSTA under HY363, HY503, HY532 ! Dimensions 530 x 325 x 325 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-3,5E1/112U-210AK Content: 3,5 l operating pressure: 210 bar Pmax: 310 bar operating temperature: -10 °C - 80 °C connection thread: G3/4 material ( storage body ): steel material ( storage bladder ): BR20 (acrylonitrile butadiene) spare part for machining center HECKERT CWK400 D !, among others used, tested ! Dimensions: 340 x 190 x 215 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator ORSTA 2,5/16 TGL 10843 04122 88 capacity 2,5 l zul. Operating pressure 160 bar zul. Operating temp. 80°C used, tested ! Dimensions: 285 x 155 x 190 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator ORSTA 10/16 TGL 10843 03070 87 capacity 10,0 l zul. Operating pressure 160 bar zul. Operating temp. 80°C used, tested ! Dimensions: 450 x 240 x 240 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC 250-3,5E1/112A-210 AK capacity: 3.5 l Pmax.: 210 bar Tmax.: 80°C with bracket used, tested ! Dimensions: 355 x 190 x 220 mm

hydraulic slewing actuator, rotary actuator SÜDHYDRAULIK LÜBECK, KORK-STEINBACH GmbH HDK75.87H Drawing No.: 7008.0001 Shaft diameter: Ø 40 mm Wavelength: 87 mm 2x Groove width: 12 mm Flange diameter: Ø 100 / 180 mm bolt circle diameter: Ø 155 mm 8x Tapped hole: M10 x 1.5, depth: 27 mm spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 275 x 180 x 190 mm

Diaphragm accumulators, bladder accumulators, accumulators LANGEN & CO. D0,07-210 capacity: 0,07 l zul. Operating pressure: 210 bar temperature: max. 80 °C filling: nitrogen ( 5 bar ) External connection thread: M14 x 1.5, length: 14 mm width across flats: 22 mm New ! Dimensions: 100 x 65 x 65 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator LEDUC AS 400 capacity: 2.5 l zul. Operating pressure: 400 bar filling: nitrogen ( azote ) female connection: 3/4 ( inches ), depth: 20 mm used, tested ! Dimensions: 214 x 214 x 225 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO200-1E1/112U-200AB Content: 1,,0 l Pmax.: 200 bar T: -10 - 80°C Hydraulic connection: Female thread: G1/2 ( inch ) / External thread: M33 x 1.5 Width across flats: 41 mm Filling connection: Internal thread: Male thread: M28 x 1.5 New ! Dimensions: 205 x 137 x 137 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO140-1,,4E1/112U-140FT080 Capacity: 1.4 l Pmax.: 140 bar T: -10 - 80°C Hydraulic connection: Male thread: M18 x 1.5 width across flats: 30 mm Filling connection: Female thread: Male thread: M28 x 1,5 New ! Dimensions: 210 x 145 x 145 mm

Membrane accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-3,5E1/112U-210AB Capacity: 3.5 l Pmax.: 210 bar T: -10 - 80°C Hydraulic connection: Female thread: G3/4 ( inches ) / External thread: M45 x 1.5 Width across flats: 46 mm Filling connection: Internal thread: External thread: M28 x 1.5 New ! Dimensions: 345 x 170 x 170 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO330-3,5E1/112UA1A9A11S1-330AK180 Capacity: 3.5 l Pmax.: 330 bar T: -10 - 80°C Hydraulic connection: Female thread: G3/4 ( inch ) width across flats: 46 mm Filling connection: Female thread: Male thread: M28 x 1.5 New Dimensions: 330 x 173 x 173 mm

Pressure switch with accumulator KALTENBACH KKS400 Pressure switch: TELEMECANIQUE XM2 - JM050 P: max. 50 bar Accumulator: INTERGRAL HYDRAULIK Type D0.08-250 P: max. 250 bar, capacity: 0.08 litre spare part for cold circular saw KALTENBACH KKS400 !, among others used, tested ! dimensions 330 x 80 x 70 mm

Diaphragm accumulators, pressure accumulators INTEGRAL ACCUMULATOR GmbH D0,75-210 075-1315-053-611 capacity 0,75 l zul. Operating pressure 210 bar zul. Operating temp. 80°C spare part e.g. for TRAUB TND300 ! used ! Dimensions: 185 x 122 x 122 mm

Axial fan set, axial fan, with accessories EBM PAPST 2x TYPE: 4650N 2x TYPE: 4656N 19 Watt 230 V 1AC 50 / 60 Hz 2x Protective grille: 0001895 Diameter: Ø 120 mm 2x Fan connection cable: LAK 150 Art.-Nr.: 40984 Length: 1.5 m New, with documents ! Dimensions ( fan ): 119 x 119 x 38 mm Dimensions ( packaging ): 245 x 205 x 100 mm

Window folding zasche

number: 65 Positionen : 28 mm condition: neu weight: 49 kg Basic-Set 3 65 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Accessory kit for gauge blocks MITUTOYO 516-601 with gauge blocks holder 100, 160 and 250 mm in wooden box New and original preserved ! Dimensions: 500 x 280 x 60 mm

Accessories for tool presetter SOMET TYPE 685062 1x mandrel SK50 / Ø 60 x 250 mm Dimensions: Ø 71 x 378 mm 1x tool holder SK50 / Ø 80 x 128 mm Dimensions: Ø 140 x 158 mm 1x tool holder SK45 / Ø 80 x 128 mm Dimensions: Ø 110 x 158 mm 1x tool holder SK40 / M12 x 1,75 Dimensions: Ø 52 x 133 mm 1x fine pointer M1/60 suitable tool setting device - see ME427 ! used, tested ! Dimensions ( wooden case ): 550 x 340 x 180 mm

pneumatic clamping drive NAREX JU 30 Clamping force: max. 60 kN at 5 seconds Clamping time Operating pressure: 0.4 - 0.6 MPa ( 4.0 - 6.0 bar ) Driver: 28 x 28 mm with adapter: 17 x 17 mm, 19 x 19 mm, 22 x 22 mm New, with documents ! Dimensions ( clamping drive ): 195 x 131 x 160 mm Dimensions ( packaging ): 210 x 150 x 180 mm

Rotary actuator FTW, PRODUCTION TECHNOLOGY Weißenfels DR400 AV Rotation angle: 360° turntable: Ø 420 mm Fastening flange: 530 x 505 mm Drive ring: Ø 128 / 108 mm Guide bolt: Ø 65 mm Flange for drive: Ø 80 / 130 mm, Bolt circle diameter: Ø 165 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 530 x 515 x 450 mm

Clamping drive, clamping force generator electric WMW EDU I80 TGL 0-5471 Year: 1982 torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V 0,55 kW for more clamping actuators see MMZ158, MMZ739 !; New ! Dimensions: 280 x 130 x 170 mm

Clamping drive, clamping force generator, electric, with reversing switch WMW EDU I80 F Speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMR 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 with direction switch ! used, tested ! Dimensions: 280 x 130 x 190 mm

Quick action chuck WTE 11.297.40.13 3779303/013 SK 40 Tool: Ø 0.5 - 13 mm used, tested ! Dimensions: 154 x Ø 64 mm

Quick-action chuck PAGUS DIN 69871 AD/B SK 40 Tool: Ø 1 - 13 mm 15 Nm used, tested ! Dimensions: 159 x Ø 64 mm

Quick action chuck WTE 11.296.40.13 D38836 SK 40 Tool: Ø 0.5 - 13 mm used, tested ! Dimensions: 154 x Ø 64 mm

Clamping drive, clamping force generator electric WMW EDU I80HDR EKIH Year: 1988 torque ( adjustable in 8 steps ): 20 - 120 Nm 80 rpm Engine: KMRB 71 K 4 E 0,0,55 kW 1380 rpm 220 / 380 V 3AC shaft diameter: Ø 30 mm Flange diameter: Ø 160 mm used, tested ! Dimensions: 470 x 240 x 190 mm

Clamping drive, clamping force generator electric WMW EDU I 160HDREKI-H torque ( adjustable in 8 steps ): 20 - 110 Nm 160 rpm Engine: KMRB 71 K 2 E 0,75 kW 2800 rpm 220 / 380 V 3AC shaft diameter ( outside ): Ø 30 mm, Length: 50 mm Shaft diameter ( inside ): Ø 22 / 18 mm, spline shaft profile, 4 wedges, width: 7mm Flange diameter: Ø 70 / 120 / 160 mm bolt circle diameter: Ø 98 / 142 mm 8x thread: M8 x 1.25 spare part for milling machine AUERBACH FUW 400 ! used, tested ! Dimensions: 470 x 265 x 160 mm

Clamping drive, clamping force generator, electric, with reversing switch WMW EDU I80 FDR speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm Engine: KMR 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 280 x 130 x 190 mm

Clamping drive, clamping force generator, electric WMW EDU I80 MT speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm Engine: KMR 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 280 x 130 x 170 mm

Clamping drive, clamping force generator, electric, with fan WMW EDU I80 EL speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm Engine: KMR 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 305 x 130 x 170 mm

Clamping drive, clamping force generator, electric WMW EDU I80 M1 speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMR 71 G 4 F 0,75 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 New, with documents ! Dimensions ( clamping drive ): 295 x 130 x 170 mm Dimensions ( packaging ): 320 x 210 x 140 mm

Clamping drive, clamping force generator, electric WMW EDU I80 M1 speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMR 71 G 4 F 0,75 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 295 x 130 x 170 mm

Clamping drive, clamping force generator, electric WMW EDU I80 Speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm Engine: KMR 71 K 2 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 275 x 130 x 170 mm

Clamping drive, clamping force generator, electric WMW EDU I160 speed: 160 rpm torque ( adjustable in 8 steps ): 20 - 110 Nm engine: KMR 71 K 2 E 0,75 kW 2800 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 mounting ring: diameter ( inside / outside ): Ø 137.8 / 160 mm, width: 67 mm female thread: M140 x 2.0, depth: 44.8 mm used, tested ! dimensions ( clamping drive ): 335 x 165 x 215 mm

Clamping drive, clamping force generator, electric, with coupling device WMW EDU I80 EK I10 Clamping drive: EDU I80 Speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm Engine: KMR 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC EK I10 Dome stroke: 12 mm Dome lifting capacity: 80 N shaft diameter: Ø 40 mm, 3x driver, shaft pitch: 45° / 75°, length: 8 mm Flange diameter: Ø 160 mm bolt circle diameter: Ø 142 mm, 5x bore: Ø 9 mm used, tested ! Dimensions: 365 x 270 x 160 mm

Clamping drive WMW, ROTO RECORD ESpU 12 R Engine: KMR 71 K 4 E 0,0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: 14 x 14 mm, square profile Flange diameter: Ø 142 mm bolt circle diameter: Ø 142 mm, 4x threaded hole M6 x 1.0 used, tested ! Dimensions: 255 x 195 x 142 mm

Clamping drive, clamping force generator, electric WMW EDU II70 speed: 70 rpm torque ( adjustable in 8 steps ): 100 - 300 Nm engine: KPR 80 K 4 E 1,1 kW 1410 rpm 220 / 380 V 3AC hollow shaft: wedge hub profile 6 x 23 x 28 x 6 ( TGL 0-5472 ) bolt circle diameter: Ø 110 mm, 4x threaded hole M10 x 1.5 used, tested ! Dimensions: 335 x 165 x 215 mm

Pneumatic rotary actuator +GF+ ( GEORG FISCHER ) type: PA11 198150127 pmax: 7 bar spring force opening ( FO ) with stroke limiter used, tested ! Dimensions: 195 x 150 x 95 mm

Valve actuator, rotary actuator, pneumatic valve actuator, with position switch ARIS ACTUATORS AND CONTROLS WPE 2-4-A Driver: 17 x 17 mm Positioner: CROUZET Type 83 850 501 Switching capacity: 380 V AC, 10 ( 4 ) A Control valve: FESTO MFH-3-1/4-SA 26615 Operating pressure: 2.2 - 10 bar Control voltage: 220 V AC 50 Hz used, tested ! Dimensions: 295 x 125 x 135 mm

Valve actuator, Rotary actuator, pneumatic valve actuator ARIS ACTUATORS AND CONTROLS WPE 2-4-A Driver: 17 x 17 mm Control valve: FESTO MFH-3-1/4-SA 26615 Operating pressure: 2,,2 - 10 bar Control voltage: 220 V AC 50 Hz used, tested ! Dimensions: 195 x 120 x 130 mm

Pneumatic swivel actuator SMC CDRB1BW80-90S-XF pmax: 1.0 MPa ( 10 bar ) drive shaft: Ø 17 mm, length: 50 mm, groove width: 5 mm flange diameter: Ø 30 / 88 mm, bolt circle: Ø 70 mm, 4x threaded hole: M8 x 1.25, depth: 15 mm flange: 110 x 95 mm, hole spacing: 48 / 93 mm, 4x bore: Ø 9.5 mm New ! Dimensions: 178 x 110 x 96 mm

Linear actuator FESTO DGPL-40-1200-PPV-A-HD40-GK-D2 175136 stroke: 1200 mm Piston diameter: Ø 40 mm slide: 260 x 185 mm pmax: 8 bar used, tested ! Dimensions: 1580 x 185 x 125 mm

Linear actuator, with shock absorber FESTO DGP-50-600-PPV-A-B 161783 stroke: 600 mm piston diameter: Ø 50 Slide: 205 x 24 mm pmax: 8 bar 2x Shock Absorber: YSR-16-20-C ( 34573 ) used, checked! Dimensions: 950 x 125 x 123 mm