700 hf used for sale

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

pressure:56 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working feed:0 - 10 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Dough divider for a tension and oil-free parting of the dough Model: Slim 700 Cylinder and piston made of high-quality stainless steel Teflon-coated stainless steel container with safety cover Power max. 1,100 pieces per hour Sub-range from 80 to 700 gr. (depending on the type of dough) DGUV V3 tested Electronic variable speed and piece counter Weighing with manual weight adjustment Length of the treadmill 50 cm Stainless steel Machine mobile with brake Connection 400V, 1.6 kW, 16A-CEE plug New machine with 12 months warranty optional: - Output conveyor belt up to max height 1650 mm - Automatic flour spreader - Round-wire module - Funnel 90 kg - higher base Visit our large bakery machinery park!

VESPA 45/80/37 kWt VGA Cutting mill for plastics 37 KW, 400-700 kg. Model VESPA 45/80/37 kWt VGA Throughput Kg/h: 400-700 Rotor diameter мм: 450 Rotor knife quantity/dimensions piece x mm: 6×400 Stator Knife Quantity/Dimensions Piece x mm: 4×400 Engine kW: 37 Weight Kg: 2300 VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with precision machining and surface finish – Good accessibility for cleaning and maintenance – Electrical equipment with SCHNEIDER ELEC ...

machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...

mobile belt width 400 mm adjustable speed with press roller capacity : 3,95 kW with air knife dimensions (l x w x h) : ± 3.700 x 900 x 1.700 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 250 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: On work bench: Working bench: Length: 1600 mm Width: 700 mm Height: 850 mm Rear drive: SIMONET Headstock with reduction gear Driving plate Set of collets: W20

Robot KAWASAKI MX 700 Year of construction: 2012 Control: CNC 6-axis Max arm range: 2 839 mm Max load: 700 kg Country of origin: Japan

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Technical data Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 700 mm Table divisions (B): 360´000x0.001 ° Table speeds: up to: 15 rpm Pallets: number: 9 Length: 500 mm Width: 400 mm Time of changing palets: 14 sec Transport weight: 500 kg Tool changer: Number of tools: 144 (2x72) Max. tool-weight: 12 kg Time of tool changing: 6 - 8 sec Spindle nose: ISO: 45 Horizontal spindle speeds: stepless from: 40 rpm up to: 10000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min vertical from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 kW Total  ...

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Milling Machine MAHO MH 700 C CNC- 5 axis CNC- Phillips 432 X/Y/Z- 700/450/500 mm B axis CNC Universal table 820x480 mm 5th axis- CNC/NC dividing head ISO 40 spindle adapter Quill stroke of spindle 100 mm Universal table: -swiveling of the Horizontal X/Z axis 30 degrees -swiveling of the vertical Y axis 360 degrees Spindle speeds infinitely variable 20-3150 rpm

Loop scope Length x width 1200 x 600 mm Distance table spindle Center max. 700 mm Wheel Max (D x W x d) 400 x 80 x 127 mm Grinding head and drive Y-axis (vertical movement) Vertical grinding head 550 mm Distance from spindle Center table 150... 700 mm Machine table and drive x axis (longitudinal movement) Magnetic clamping plate size 1200 x 600 mm Table longitudinal travel, max. 1300 mm Table burden, including magnetic clamping plate, Max 800 kg Stand and drive Z-axis (transversal movement) Stand transverse stroke, 560 mm Space requirements, power consumption, weight Space, with coolant system 4410 x 2600 mm (W x D), Machine height 2550 mm Weight of the machine (incl. control cabinet), CA. 5400 kg

OSTAS PLATE SHEAR TYPE SBM 700 x 95 -Capaciteit 700 x 4 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -2 Snelheden -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical details TYP/Model: Formmaster 6/30 Table surface: 600 x 300 mm Table adjustment lengthwise: 700 mm Cross: 300 mm Grinding area: 600 x 300 mm Grinding height max: 300 mm Magnet: 600 x 320 mm Grinding slices: 220 x 25 x 52 mm Automatic vertical delivery: Yes Connection: 8 kW Accessories: Auto. Vertical delivery; Full enclosure, magnet, Wet grinding; Depulsion for grinding discs Condition: Good Addition: The machine can be visited in our warehouse, not currently under electricity! Weight: 2.6 t Dimension machine about: 2,700 x 2,200 x 2,500 mm Subject to change and error in the technical details and details.

Pallet rack heavy load shelving Jungheinrich Thyssen dismantled type multipal N, 3,360 pallet places, good condition, free partition load 2,400 kg, 800 kg / pallet, tray width loaded, 2,700 mm, 308 stand, stand height approx. 9,000 mm, stand width 1,100 mm, 1,680 trusses Length 2.700 mm. shelf connectors for rows of double mesh. The shelf has been tested every year. Good condition. Subsets can be purchased. Very reasonably priced for sale.

plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.700 mm infeed height : ± 800 mm total dimensions : ± 6.800 x 1.000 x 2.700 mm adjustable speed mobile 1 kW

RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG

Hydr. Flat, - Profile and bar steel shears with cut-out device and punch punch Offer number: 15229 Make: MUHR + BENDER Type: KBLH 700 Machine no: 01562869552445 Built: 1986 Technical data: - two separate working cylinders, - it can be used at two workstations - work at the same time - Flat steel shears - knife length 520 mm - for flat material 500 x 18 mm - Profile steel shears - L- steel at 90° 130 x 12 mm - at 45° 90 x 10 mm - T-steel at 90° 180 mm - Bar steel scissors - Round steel 65 mm - Square steel 60 mm - Cut-out device - rectangular tool for material up to 12 mm - Punching hole - Punching force approx. 700 KN - Stroke infinitely variable 0 - 75 mm - punches in steel up to 30 mm in 20 mm - Extension 510 mm - Hydraulic drive 400 V / 8.5 kW - Space requirement approx. W 1850 x H 2100 x D 750 mm - Weight ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) / incl. rolls We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 723 mm high 700 mm deep 04x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D  ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 888 mm high 700 mm deep 04x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x angle ...

Saw blade grinding machine with car. bevel up to 1050 mm by CBN or DIA cut in deep grinding process Schmidt Tempo XL Grinding range 80 to 1050 mm Saw blade thickness up to 10 mm Mounting bolt 16/32 mm Grinding wheel diameter 200 mm Spindle rotary screw up to 5,700 rpm Working speed 3 to 50 z/min Integrated coolant device Dimensions 1,400 x 1,750 x 2,250 mm Weight approx. 1,700 kg

Key data: 700 , 410 , 430

Capacity round maximum diameter: 700 mm Angle degrees maximum: 410 Capacity square: 430 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Capacity 90°:     410° Cutting flat 90°: 700 x 410 mm Capacity L 45°:   430 x 410 ° Capacity R 45°:   500 x 410 ° Feed single stroke:75mm Circle blade size:5800 x 41 x 1,3 mm Power:            5,5 kW Length:           2.800 mm  Width:            1.500 mm  Height:           2.000 mm  Weight:           1.850 kg 

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Make: MEBA Type: 410 DG 700 YOP: 2003 Capacity 90°:       410° Cutting 90°:        700 x 410 Ø Capacity L 45°:     560 x 400 ° Capacity R 45°:     600 x 400 ° Feed multiple stroke:1.500mm Min. cutting length:75mm Cutting speed Vario:15 - 150 m/min. Circle blade size:  6760 x 41 xq1,3 mm Power:              5,5 kW Length:             2.800 mm  Width:              3.250 mm  Height:             2.300 mm  Weight:             3.300 kg 

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

Factory number: 78046 Power: 24 kW Engine in EEx Switchgear not in EEx with funnel and chute Operating Instructions, spare grinding set LWH: 700 x 700 x 1500 mm Weight: approx. 300 kg

IFM 2000Air capacity 2200m3/h Engine power 1.5KW, Operating voltage 230/400V;; 50/60Hz; 3Ph Dimensions Filter 1020mm620mm800mm 4 filter levels Accessories High Tripod,7007001700mm Suction hose diameter 200mm

Storage tanks / transport tanks with cooling jacket made of V2A NEW TOTAL LIST Content: 700 litres, 900 litres, 1100 litres Cat-No.: Content Liter: 20-00009L-1 700 20-00009-2 900 20-00009-3 1100 Material: V2A - AISI 304, 1.4301 Surface: outside marbled III C Tank top: with 4 x crane eyelets with threaded welding nozzle DN 40 with thread DN 150 Tank cylinder: with manhole front 530 x 420 mm with cooling jacket Underbody: with residual drain DN 50 (disc valve DN 50 at extra charge) with 4 x feet

Table length: 620 mm Table width: 350 mm Longitudinal X: 450 mm Cross Y: 350 mm Vertical Z: 300 mm Positions ATC: 10   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 430 X – Travel:              450mm Y – Travel:              350mm Z – Travel:              300mm Table Length:            620mm Table Width:             350mm Table load:              350kg Feed rate X-Axis:        30.000mm Feed rate Y-Axis:        30.000mm Feed rate Z-Axis:        30.000mm Spindle Taper:           40ISO/Bt/Mk Power on spindle:        12kW Speeds / ranges:    & ...

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

W863 1 horizontal hydraulic bale press LTG, 1988 pressure about 20 t., feeding by 2 shutfeeders, bale dimension approx. 700 x 700 x 1200 mm, bale weight 80 - 120 kg

Machine details 1105-02951 Machine type Machining Center - Vertical Make FAMUP Type MCX 700 P Built 1998 Control type Cnc Location Haguenau Origin Italy Delivery Right away Freight base EX WORK Technical details x-Way 700 mm y-way 500 mm z-way 640 mm Control FANUC OM Spindle speed 8000 rpm Spindle motor 22 kW Speeds x/y/z 40 mm/min Table size 600 x 450 x 2 mm Tool change time 1.5 sec Tool magazine: 30 SK 40 Total performance requirements 25 kW Machine weight approx. 5.5 t Information contrOL FANUC OM SPINDLE 22KW 8000 U/MIN spaenefoerderer

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Electro.-Pneum. Hot stamping press Gierlich PE600 with round table, 6 stations manufacturer: Gierlich type: PE600 mach.-nr.: 05437 year of construction: ? comm.-nr.: 0101/100/230/0431 stock-nr.: 1864 + Regular Price: 4.850,- € > Reduced Price: 2.425,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: 600 kg, adjustable height adjustment: 210 mm stamping table size: 300 x 110 mm temperature up to: 400° C, adjustable air pressure up to: 10 bar, adjustable time setting for lifting/lowering: 0 – 6 Sec./Min. voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm  ...

Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 45 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Extension 385 mm - Table with 2 T-slots with hand crank adjustable height - Table size 550 x 480 mm - min. / max distance table / drill spindle 120 / 650 mm - Column diameter 200 mm - Feed electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/U. with overload protection - Drilling spindle speeds infinitely variable in 3 stages 60 - 1900 rpm. - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 2120 x D 1100 mm - Weight approx. 700 kg - with: - Thread cutting device - Coolant device - digital speed display

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

Turning diameter: 700 mm Turning length: 1105 mm Turret positions: 12 CNC Brand: Fanuc DAEWOO - PUMA 350 CNC Lathe Ø 480 x 1050 mm MACH - ID 6305 Make: DAEWOO Type: PUMA 350 Control: FANUC YOP: 1998 Max. turning Ø   700 mm X-Axis     362 mm Z-Axis     1.105 mm Spindle bore      91 mm Speedrange       3500 Rpm Spindle power       26 kW ATC / revolver      12 Control       Fanuc 18iT Chip conveyor       Yes Pinole taperMk     6 Mk Stroke pinole        120 mm Dimensions Length     4.000 mm Width       2.400 mm Height      2.300 mm Weight      8.200 kg

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...

Table length: 1800 mm Table width: 630 mm Longitudinal X: 1400 mm Cross Y: 700 mm Vertical Z: 600 mm MACH-id      5369 MAKE           TOS CZ TYPE             FGS 63 T Plus YOP               1998 SPECIFICATIONS X-Axis        1400 mm Y-Axis           700 mm Z-Axis           600 mm Table Length        1800 mm Table Width            630 mm Table load              1800 Kg Spindle speeds       4000 Rpm Feed rate X-Axis         4000 mm/min. Feed rate Y-Axis          4000 mm/min. Feed rate Z-Axis      & ...

Mixing container 150 l Filling lid (diameter 200 mm) Propeller mixer 2.2 kW stable design Outlet with valve (milk pipe) Level detector high-quality workmanship (stainless steel V4A) Dimensions LWH: 700 x 700 x 1850 mm Weight: approx. 170 kg

Table length: 700 mm Table width: 460 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    5459 MAKE        Deckel Maho TYPE          FP3A YOP            1991 SPECIFICATIONS X-Axis      400 mm Y-Axis      400 mm Z-Axis       400 mm Table Length       700 mm Table Width         460 mm Table load            400 Kg Spindle speeds      4000 Rpm DIMENSIONS Length       2600 mm Width         2400 mm Height        2100 mm Weight        2000 kg

Turning diameter: 700 mm Turning length: 1425 mm Turret positions: 40 CNC Brand: _Unknown / Other CNC Model: DMG Ergoline MACH-id    5333 MAKE         DMG MORI TYPE           CTX BETA 1250 YOP              2011 SPECIFICATIONS Max. turning diameter Ø     700 mm DBC Turning length        1425 mm X-Axis       300 mm Z-Axis       1300 mm C-Axis        360000 ° Spindle bore      95 mm Main Spindle speed       4000 Rpm ATC / revolver     40 Speed live tools     4000 Rpm Power live tools        12 kW Control        SIEMENS 840D SHOP TURN Chip conveyor     ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 0   CNC Brand: _Unknown / Other MACH-id    5320 MAKE        DMG Mori TYPE          DMU 40 monoBLOCK YOP            2008 SPECIFICATIONS X - Travel        700 mm Y - Travel        400 mm Z - Travel        400 mm A - Axis           360 ° B - Axis  + 30 / - 120 ° Table load in Kg       250 Kg Table Ø      450 mm Feed rate X-Axis      50.000 mm/min. Feed rate Y-Axis       50.000 mm/min. Feed rate Z-Axis       50.000 mm/min. Feed rate A-Axis      &nb ...

Turning diameter: 700 mm Turning length: 800 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Siemens CNC Model: 840 D SL MACH-id      5220 MAKE           DMG MORI TYPE             CTX 800 BETA YOP                2011 SPECIFICATIONS Max. turning diamter Ø      410 mm Swing        700 Ø DBC Turning length      800 mm X-Axis        290 mm Y-Axis        800 mm Z-Axis         60 mm C-Axis        360000 ° Spindle bore      76 mm Main Spindle speed         5000 Rpm ATC / revolver       12 Speed live tools  &nbs ...

Center height: 165 mm Center distance: 750 mm Spindle bore: 58 mm CNC Brand: Fanuc CNC Model: Oi Mate MACH-id    5214 MAKE        Pinacho Spain TYPE          SMART 6 YOP            2009 SPECIFICATIONS Max. turning diamter Ø     335 mm DBC Turning length        750 mm X-Axis         700 mm Y-Axis          250 mm Spindle bore      58 mm Main Spindle speed     4000 Rpm Control        FANUC Oi MATE - TC Hours          700 H DIMENSIONS Length     2100 mm Width      1400 mm Height      1600 mm