330 lc used for sale

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

grinding length: 600 mm grinding width: 330 mm workpiece height: 500 mm documentation: weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 330 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 500 mm : 320 mm Capacity 90° rectangular: 500 x 320 mm speeds steplessly adjustable: 20 - 100 m/min table height: 640 mm total power requirement: 3,0 kW weight of the machine ca.: 860 kg dimensions of the machine ca.: 2,10 x 0,85 x 1,30 m On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

sheet width: 2570 mm plate thickness: 7 mm pre-bending: 6 mm diameter of upper rolls: 220 mm min. bending diameter: 330 mm total power requirement: 7,7 KW weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,45 x 1,12 x 1,38 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mm turning length: 1000 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 36 mm metrical thread cutting: 0,4 - 3 mm threading WHITWORTH: 56 - 4 TPI tailstock travel: 95 mm face slide travel: 160 mm number of spindle speeds: 70 - 2000 (8) U/min upper slide-adjustment: 68 mm longitudinal feeds:: 0,02 - 2,7 mm/U total power requirement: 1,5 mm weight of the machine ca.: 600 kg dimensions of the machine ca.: 1850 x 670 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M.No.: A5VM021002592 // Total counter: 547851 Equipment / Additional information: Printer specifications : Print speed A4: 60 ppm / print speed A3: 33 ppm / Print speed SRA3: 31 ppm Print speed / hour: A4: 3316 pph / A3: 1792 pph / SRA3: 1681 pph Print resolution: 1,200 x 1,200 dpi x 8bit / Max 1,200 x 3,600 dpi equivalent Gradations: 256 gradations System specifications Paper weight: 62 to 300 g/m² / Duplex unit: Non-stack type, 62-300 g/m² Paper sizes: A5-A3+ (330 x 487 mm) Maximum image area: 323 x 480 mm Maximum paper input capacity: 4,250 sheets Maximum paper output capacity: 3,100 sheets Staple finisher 2-point and corner stapling / stapling up to 50 sheets / auto-shift sorting and grouping, output for up to 2500 sheets, EFI Fiery-Workflow

sheet width: 2570 mm plate thickness: 20 mm pre-bending: 16 mm diameter of upper rolls: 350 mm roll diam. bottom roll: 330 mm speed: 1,15 - 5 m/min total power requirement: 22 KW weight of the machine ca.: 12,6 t dimensions of the machine ca.: 5,15 x 2,05 x 1,85 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Special accessories included: - MEP LubeCut microdosing ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 8 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 19.500,- € gross price: €23,205 - - - - - Iveco emergency generator set 80 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Iveco (Italy) - Model: N67TM4 - 6 cylinders -Diesel - 1500 rpm - Displacement: 6700 cc - - - - - Generator: - Manufacturer: Stamford (England) - 160 / 176 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer -  ...

With C axis Controller Siemens 840D Turning length:581 mm Turning diameter over cross slide:330 mm Turning diameter:200 mm Spindle speed (min.):5,000 rpm Spindle bore:68 mm Travel distance X-axis: 160 mm Travel distance Z-axis: 450 mm

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

turning length: 2000 mm centre height: 330 mm swing diameter over bed slide: 660 mm swing diameter over slide rest: 460 mm turning dia. in gap: 900 mm spindle bore: 105 mm turning speeds: 25 - 1600 U/min bed width: 400 mm spindle taper: 55029 D 1-8 taper in tailstock: 5 MK quill travel: 235 mm total power requirement: 7,5 kW weight of the machine ca.: 2900 kg. range L-W-H: 3630 x 1200 x 1520 mm scope of delivery - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts ...

2 used steam turbine units available: 1. Type: B5 S2 + G IV Year: 1991 Turbine output: 294 kW at 1.35 bar and 170 C With exhaust gas heat exchanger 2. Type: B5 S3 + G IV Year: 1992 Turbine output: 330 kW at 1.35 bar and 170 C With exhaust gas heat exchanger Subject to prior sale - Errors possible

USED STAINLESS STEEL GLATT LABORTECNIC TR160-02 CENTRIFUGE SCREEN REF#: C6696 Centrifugal sifter machine model TR160 / 2 manufactured by GLATT LABORTECNIC. Parts in contact with the product made of stainless steel. General characteristics: Manufactured by GLATT LABORTECNIC Model TR160-02 Material Stainless steel Year built 1985 Feed hopper diameter: 300 mm Discharge diameter: 140 mm Transport dimensions: Base: 1000x800 mm Height: 1500 mm Technical characteristics: Motor characteristics: Power 2.2 kW Rotational speed 330-2000 rpm

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Size: max 500 x 330 mm min 140 x 150 mm Product thickness: 4-96 pages Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm

We offer 18 pieces Peri Trio 330 x 240 elements refurbished. Newly covered with original Peri Finply formwork. Frame cleaned, primed and painted with zinc phosphate coating. 50% discount on the new value of 3683,00€ = 1841,50€/ piece. Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

20 station collating, 1 x VAC 100a, 1 x VAC 100m, 1 x Stacker ST-40, 1 x folder ACF-30, 1 x Stitcher SPF 30, 1 x Three knife trimmer HT 330

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 320 mm Table height: 128 mm Machine´s weight about: 80 kg Dimensions: Length: 430 mm Width: 330 mm Height: 128 mm Various accessories: Digital readout number of axis:

Depth: 0 mm Height: 0 mm Width: 0 mm Work Envelope (WxDxH) (mm): 0 Process Stages: 0   Other Info: 0 Technical data Working area: Width: 400 mm Height: 240 mm depth: 300 mm Pressure: 6 bar Voltage 50 Hz 3x: 230 Volt Machine´s weight about: 20 kg Overall dimensions machine: Length: 420 mm Width: 400 mm Height: 330 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 160 mm Execution: hydraulic Max. distance from table to spindle-centreline: 330 mm Longitudinal travel (X-axis): 483 mm Transversal travel (y axis): 171 mm Table speeds: stepless from: 1.50 m/min up to: 18.0 m/min Automatic vertical feed: from: 0.0010 mm Diameter of grinding wheel: 178 mm Width of the grinding wheel: 13 mm Grinding wheel speeds: from: 2880 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.00 HP Machine´s weight about: 850 kg Overall dimensions machine: Length: 1600 mm Width: 800 mm Height: 1700 mm Various accessories: Coolant system Magnetic plate: Length: 350 mm Width: 160 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen diameter: 300 mm Microscope stage length: 520 mm Microscope stage width: 280 mm T-channel width: 6H7 mm Longitudinal way: 250 mm Transversal way: 125 mm Table load max.: 20 kg Glass table: Length: 330 mm Width: 200 mm Amplifications: 10 Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 100 kg Overall dimensions machine: Length: 1400 mm Width: 600 mm Height: 1300 mm Various accessories: Obscuration device

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: manual Table: Length: 330 mm Width: 200 mm Saw blade diameter: 200 mm Saw blade thickness: 6.5 mm Rotation speed: 2700 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1300 mm Various accessories: Set of blades Single stopping device

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.2 mm Max. drill capacity: 3 mm Drilling length: 90 mm Spitzwinkel min.: 90 ° max.: 180 ° Grinding wheel speeds: from: 5000 rpm Voltage: 220 Volt Machine´s weight about: 16 kg Overall dimensions machine: Length: 330 mm Width: 250 mm Height: 300 mm

- X: 420 mm - Y: 330 mm - Z: 400 mm - Table size: 850 x 325 mm - Speed range: 0 - 5000 rpm - Spindle mount: SK 40 - Rapid traverse: 12 m/min - WZ changer: 12-speed - Tool holder: 40 SK - Tool weight max.: 5 kg - Tool length max.: 220 mm - Tool Ø max.: 63 mm - Control: Sinumerik 810 M - Switch-on hours: 40484 h - Total power: 15 kW - Machine weight: 3200 kg - Dimensions (W x D x H): 2.4 x 2.3 x 2.45 m - Condition: good, ready for immediate use Details one tool station is currently defective, nice compact machine, can be used immediately Accessories HILMA SM 125 machine vice, various recordings in the magazine, documentation, machine feet

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 300 mm Dimensions: Length: 530 mm Width: 330 mm Height: 140 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 250 mm Longitudinal travel (X-axis): 330 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 475 mm Spindle speeds: number (steps): 12 from: 63 rpm up to: 2800 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 4 mm/min up to: 500 mm/min vertical from: 2 mm/min up to: 200 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.2 HP Machine´s weight about: 950 kg Overall dimensions machine: Length: 1600 mm Width: 1100 mm Height: 1650 mm Various accessories: Positionier- und Streckensteuerung Digital readout number of axis:: 3 Manufacturer: ELESTA Coolant system Lamp Chip tray

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.2 mm Max. drill capacity: 3 mm Drilling length: 90 mm Spitzwinkel min.: 90 ° max.: 180 ° Grinding wheel speeds: from: 5000 rpm Voltage: 220 Volt Machine´s weight about: 16 kg Overall dimensions machine: Length: 330 mm Width: 250 mm Height: 300 mm

Injection Pump Diesel Pump Stanadyne A3 DB4429-6101 JCB 320/0674 Condition: unused, there may be traces of storage Voltage: 14V Current: 95A Manufacturer: Mahle Part Number: 11 204 215 JCB Number: 320 08719 Reference: 11.204.467 , IA1484, AAK5840 , MG23, 11.204.893, AAK5881, 11.204.215, AAK5820, 11204467, 11204893, 11204215, 320/08648, 320/08649, 320/08719, 12786, 32008648, 32008649, 32008719, 705516095, 4400cc JCB 444TA1 Engine JCB Agrar Agri Tractor, 524-50, 526-56, 527-55, 531-70, 535-95-AGRI 536-60, 2CX 3CX/PLUS/CLL 4CN 4CX 225T 444, G66 QX 526-56 527-58 926 2WD/4WD 930 940 TCA74, 225 226 T 260 EcoMAX TCAE-55; T4F; 55kW, Tier 3 4 320T 325 T 330 TN 220 Agri TM 180, VM 535-95 540-140 540-200 VM115PD/HD/HPD, VM137 VTM860 527-55-WM Excavator Loader Tractor, 416HT 416S-AGRI PL1105 448 PL185 PL195 PT1120 PT18,

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 13 mm Table length: 400 mm Table width: 350 mm Depth of throat: 200 mm Spindle stroke: 120 mm Spindle speeds: number (steps): 10 from: 350 rpm up to: 5000 rpm min.: 30 mm max: 330 mm Voltage 50 Hz 3x: 380 Volt Power: 1.00 HP Machine´s weight about: 260 kg Overall dimensions machine: Length: 800 mm Width: 550 mm Height: 600 mm

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

Item no. 5032: 1 gebr. Universal tool milling machine Fabr. DECKEL, type FP 2 active, Bauj. 1981 with 3-axis active digital display Heidenhain Arb.-Ber.: 400 x 220 x 400 mm, drive power: 2 kW Accessories: Rigid table 700 x 330 mm Foldable splash guard cover with chip trap tray Machine feet, Documentation Other: Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to For further data, please refer to the attached data sheets

I sell large control cabinet made of steel, empty, 300 €, only self-collection. Weight 330 kg, size 2.93 m x 2.00 m x 0.75 m

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 230/400 volts / 50 Hz / 1.2/0.68 A / 0.270 kW Cutting thickness adjustment without offshoot: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knives including original knife grinder including original operating instructions Power current / 16A CEE plug Year of construction: 2006 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

power capacity: / kW volt: 330 V ampere: 5,9 A total power requirement: / kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-1681 SACCARDO ARTURO CHOP CUTTER Completely made of stainless steel. Manufacturer: SACCARDO ARTURO Model: TITANIO 2. Max. cutting length: 1.070mm. Max. cutting section: 210x240mm. Cuts per minute: 90-180 Cutting thickness: 5-60mm Weight: 330 kg. Year: 2008 3kW Dimensions of the machine: 2,367mm x 832mm; h: 1,496mm

Bezel, stick, lynette -Max. Passage: Ø 98 mm -Tip height: 180 mm -Edition: steel -technical drawing with the photos -Dimensions: 410/330/H85 mm -Weight: 10 kg

Tool Milling Machine - Universal AUERBACH FUW 400 Control type: CNC Control: HEIDENHAIN TNC 335 B total power requirement: 13 kW x travel: 500 mm y travel: 400 mm z-travel: 330 mm feeds: infinitely variable 1-1250 mm/min rapid traverse: 5000 mm/min Speed range: 20 - 3000 /28 - 4000 rpm used, tested ! Table size: 710 x 400 mm spindle holder ISO: 40 quill stroke: 100 mm Table load: 180 kg Number of grooves: 8 Groove width: 14/45 mm Tool holder: ISA 40 Dimensions: 2000 x 2800 x 2300 mm Electrical cabinet Control panel Splash guard Machine is overhauled by Auerbach 2006

x-travel: 420 mm y-travel: 200 mm z-travel: 330 mm taper in main spindle: ISO 40 table surface area: 315 x 710 mm turning speeds: 56 - 1800 U/min throat: 115 - 575 mm distance spindle /table: 65 - 395 mm workpiece weight: max. 200 kg feeds: 11,2 - 355 mm/min total power requirement: 2,2 kW weight: 1200 kg range L-W-H: 1550 x 1250 x 2000 mm from a disabled workshop () Furnishing : - robust / conventional universal milling machine - Swivel control, right front - rotatable universal milling head - manual milling spindle feed, with locking - Stable T-slot clamping/angle table - Central lubrication unit - Machine swing feet - Coolant device, with lower pan The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

High: 500 mm, Long: 970 mm, Width: 330 mm, Voltage: 220 V, Maximum weight: Ø plate = 190 mm, Distance between points: 300 mm, Specification: Angle meter

With Rexroth hydraulic group, Magnetic chip extractor, Automatic centralized lubrication / With Rexroth hydraulic unit, magnetic extractor chip, automatic centralized lubrication,, Broaching speed: 0.4-4 m / min, Jobs: 3, Max travel. from the brush: 1.800 mm, Position work: Vertical, Retraction speed: 5-10 m / min, Tons power: 40 T, Wheelbase broaches: 200 mm, Total power: 28 Cv., Dimensions table: Ø max admitted 630 mm, High: 6.250 mm, Long: 2,000 mm., Voltage: 380 V., Width: 1.330 mm., Weight: 21,000 Kg., Specification: Indoor vertical

Automatyczna maszyna do zamykania butelek w zakresie pojemności od 250 ml do 6000 ml dla każdego rodzaju nakrętek wykonanych z aluminium lub tworzywa sztucznego. W chwili obecnej maszyna jest przystosowana do zakręcania butelek PET z popularną nakrętką 38 mm, a po dopasowaniu gwiazd do konkretnego pojemnika, maszyna może zakręcać dowolne butelki z gwintem 38 mm (popularne soki, napoje lub produkty mleczne). Po zmianie głowic zakręcających może być używana przy zakręcaniu nakrętek w dowolnych butelkach z dowolnym rodzajem gwintu. Wydajność dla mniejszych formatów wynosi: od 1000 do 9.000 but/h Maszyna posiada płynną bezstopniową regulację szybkości i wydajności. Min./max. średnica butelki: fi 30 mm / fi 150 mm Min./max. wysokość butelki: 100 mm / 360 mm Ilość głowic magnetycznych: 6 szt Rok produkcji: 2010 Moc całkowita: 3,37 kW Wymiary masz ...

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

Manufacturer: Canon Model: imagePRESS C7010VP year: 2012 - 60 g/m² up to 325 g/m² - Format: up to 330 x 487 mm prints up to 4.500 pages per hour Available: 01.05.2022 Location: germany Price: on request

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feed ...