1000 kw gas used for sale

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

Manufacturer: Olsa Model: - Year: - Quality: stainless steel Capacity: 1000 litres Stirring: 4,5 KW Motor speed : 710 - 1440 rpm Internal pressure (bar): unknown, pressure possible. Air input Pressure gauge and inside pressure holding valve Double jacket: yes Heat insulation: yes T?C control hot / cold: solenoid valves Note: cleaning of interior marks possible in case of sale

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Weiss Temperature Test Chamber KWP 64/75 Cooling-heating mode : -70°C ... +130°C Cooling: 2.5 approx. k/min Heating: 3.0 approx. K/min Temperature stability: +-0.5...+-1.0K Insertion dimensions: height 1360 mm, width 880 mm, depth 1000, mm External dimensions: height 1215 mm, width 800 mm, depth 960 mm Test chamber dimensions height 400mm, width 500mm, depth 325mm The connection voltage is: 230V/1Ph+N+PE/ 50 Hz (+6%/-10%) Gplvqvbz Connected load: 1.4 kVA Plug: Schuko 16A Weight : 180 kg Type: KWP 64/75 The Weiss temperature chamber has been monitored with calibrated and calibrated test equipment!

Brush machines with injection molds Our entire machine park from the brush department is for sale. We sell machines with injection molds. The full list of machines and injection molds is in the attachment.

KWANDONG”(2x) DOOSAN 746 kW each (2006) Gross/Net tonnage 56/38; L X B X D; 23.5 x 4.80 x 2.05 M Ship name: HHIC-2 Port of registry: Philippine Subic Delivery day: 2006.12 Gross Tonnage: 40 Tons Class: Korea Society of Ship Inspection & Technology Capacity: 60

Linear guide carriage INA KWVE-25-WL-UG G3-V1 009-191-518/0431 New ! Dimensions (packaging): 200 x 140 x 70 mm

Heating controller KIEBACK & PETER KWH-A 24 V ( 24V ) ambient temperature: 0...50°C New ! Dimensions: 150 x 135 x 100 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.11 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Cooling module for welding machines, circulating air cooling module for water-cooled welding machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

single-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,2 l/min p: 30 bar engine: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm

Centrifugal pump, water pump, KSB KWPKA 80-250 Q: 27.8 l/sec. ( 100 m3/h ) H: 20 m Intake side: Internal diameter: Ø 100 mm Flange diameter: Ø 160 / 210 mm pressure side: Internal diameter: Ø 80 mm Flange diameter: Ø 1 1 40 / 200 mm Engine: SIEMENS 1LA5163-4GA70 11 kW 1455 rpm 380 / 660 V 3AC 50 Hz New ! Dimensions: 1270 x 600 x 600 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x controller card: AMK KW-R03 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC !, among others used, tested ! Dimensions: 200 x 55 x 320 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.07 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x controller card: AMK KW-R03 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions: 200 x 55 x 320 mm

Single-line pump, for fluid grease, central lubrication, lubrication pump SKF MKF1-KW2-20001+428 Q: 0,0,1 l/min pmax: 30 bar engine: Shang Yi Motor 178-900-043+428 230 V 50 / 60 Hz 0.12 / 0.15 kW ( 120 / 150 W ) Without tank ! New, with documents ! Dimensions ( pump, upright ): 215 x 135 x 285 mm Dimensions ( packaging ): 380 x 310 x 140 mm

Linear guide carriage, ball guide carriage REXROTH KWD-020-SNS-C1-N-1 R162281420 Height Guide carriage: 25.35 mm design: SNS ( narrow, normal, standard height ) nominal size: 20 mm New, with underlays ! Dimensions ( Linear Guide Carriage ): 75 x 44 x 26 mm Dimensions (packaging): 90 x 70 x 35 mm

Description: 5.28 KWp New solar modules 16x Trina TSM-330DD06M.05 polycrystalline solar modules packed with 16 solar modules each on a pallet. Pallet NO. 2 Nominal power per solar module: 330 Wp Condition of solar modules: new Logistical data solar modules: 1,700 mm x 1,00 mm x 35 mm Logisticdata: Dimensions per pallet: 1,800 mm x 1,200 mm x 760 mm Weight per pallet module: 315 kg Total weight: 315 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 760 mm, weight approx.: 315 kg

Description: 4.59 KWp New solar modules 3x DMEGC DM495M10-66HSW, 2x DMEGC DM450M6-72HSW, 5x Suntech STP450-B72/vhn solar modules mono packed with 10 solar modules each on a pallet. Pallet NO. 1 Nominal power per solar module: 450 Wp, 495 Wp Condition of solar modules: new Logistical data solar modules: 2,092 mm x 1,038 mm x 35 mm, 2,092mm x 1,135mm x 35mm, 2,095mm x 1,038mm x 35mm, Logisticdata: Dimensions pallet: approx. 2,100 mm x 1,200 mm x 550 mm Weight pallet modules: approx. 270 kg Total weight: 270 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 550 mm, weight approx.: 270 kg

Description: 8,255 KWp New solar modules 3x Jinko JKM54HC-B, Longi LR5-54HIB-400M, Jinko JKM400M-54HC4-B, Denim UM3410BB108H, Canadian CS6R-430H-A6, Jinko JKM420N-54HC-4-B, Hyundai HiE-S410VG solar modules packed in 20 solar modules each a palette. Pallet NO. 4 Nominal power per solar module: 400 Wp - 430 Wp Condition of solar modules: As good as new Logistical data solar modules: 1,720 mm x 1,134 mm x 30 mm, 1,720mm x 1,194mm x 30mm , 1,722mm x 1,134mm x 30mm , 1,722mm x 1,134mm x 30mm , 1,720mm x 1,130mm x 30mm , 1,720mm x 1,140mm x 35mm Logisticdata: Dimensions pallet: approx. 1,800 mm x 1,200 mm x 825 mm Weight pallet modules: approx. 450 kg Total weight: 450 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 825 mm, weight approx.: 450 kg

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Description: 3,795 KWp New solar modules 1x Neo-Solar D6N29E3A, 1x JA-Solar JAM60S02-300, Hanover Solar HS300M-30D, Hyundai HiE-345SG, JA-Solar JAM54S31-390MR, Jinko JKM390N-6RC3-B, Denim UM3450BB120H solar modules packed with 11 solar modules each on a pallet. Pallet NO. 6 Nominal power per solar module: 300 Wp - 450 Wp Condition of solar modules: New Logistical data solar modules: 1,640 mm x 990 mm x 30 mm, 1,650mm x 990mm x 30mm , 1650mm x 990mm x 30mm , 1,620mm x 1,070mm x 30mm , 1,720mm x 1,030mm 30mm , 1,850mm x 1,630mm x 30mm , 1,910mm x 1,130mm x 30mm Logisticdata: Dimensions pallet: approx. 1,950 mm x 1,200 mm x 550 mm Weight pallet modules: approx. 255 kg Total weight: 255 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,950 x 1,200 x 550 mm, weight approx.: 225 kg

Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg

Hydraulic motor VON ROLL AG MF 004 1000 kW 1000 rpm 350 bar 3735 l/min shaft: Ø 140 mm used, tested ! Dimensions: 1800 x 1800 x 1300 mm

Universal cabinet, tool cabinet, sheet steel cabinet PAGUS 1000 x 540 x 1000 mm without intermediate shelf used, tested ! Dimensions: 1000 x 590 x 1000 mm

Universal cabinet, tool cabinet, sheet steel cabinet PAGUS 1000 x 540 x 1000 mm with intermediate shelf used, tested ! Dimensions: 1000 x 590 x 1000 mm

Universal cabinet, tool cabinet, sheet steel cabinet PAGUS 1000 x 540 x 1000 mm with intermediate shelf used, tested ! Dimensions: 1000 x 590 x 1000 mm

Vakuumheber SCHMALZ VACUMASTER COIL VMCOIL 1000-90-25D Year: 2008 Load capacity 1000 kg diameter approx. 1300 mm For handling e.g. of coils and slit strips Suction plate 90° infinitely swivelling 380 V used, tested ! Dimensions 1800 x 1300 x 1600 mm

Universal cabinet, tool cabinet, sheet steel cabinet PAGUS 1000 x 540 x 1000 mm dent on the top (see photo) with intermediate floor used, tested ! Dimensions: 1000 x 590 x 1000 mm

Reference table, clamping plate, clamping table, grid plate PAGUS clamping area: 1000 x 1000 mm Panel thickness: 107 - 186 mm Material: Aluminium grid: 40 mm all holes: Ø 12 mm x 14 mm, with threaded hole: M12 x 1.75, depth: 30 mm 24x threaded hole: M12 x 1.75, depth: 30 mm 96x threaded hole: M10 x 1.5, depth: 25 mm 1 through hole: Ø 25 / 20 mm, length: 20 / 166 mm used, checked ! Dimensions ( with pallet ): 1200 x 1000 x 370 mm

Linear actuator FESTO DGP-25-1000-PPV-A-B 526648 stroke: 1000 mm piston diameter: Ø 25 mm carriage: 105 x 19 mm pmax: 8 bar New ! Dimensions: 1225 x 54 x 72 mm

linear actuator FESTO DGC-25-1000-KF-YSR-A 532447 stroke: 1000 mm piston diameter: Ø 25 mm Slide: 104 x 48 mm pmax: 8 bar used, tested ! Dimensions: 1240 x 70 x 120 mm

For sale a CNG natural gas bundle Sulzer 3 bank 1000 litre 200 bar. Operating pressure: 200 bar Built: 1995 Content: 12 X 77 litre bottles ( 924 litre ) 3 bank steel-building Dimensions: 200 x 50 x 220 cm Weight: 1500 kg

Stationaerer gas tank for heating system 2,800 litres Remaining capacity approx. 1,000 litres With foundation slab Last Pruefung faellig 2010 Free loaded truck Special price LPIque Propane LPG Vaillant White Head

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

with new (2019) Burny Lincoln Phantom II touchscreen control Burny 8 software center-center rail: 5000 mm cuttingwidth: 4000 mm 3 gas cutting heads, each adjustable in height Cutting table not included Longitudinal travel X-axis: 18 meter Cross travel Y-axis: 5 meter Gas cutter: 3x Read-out / Control: Burny 8 Lincoln Phantom II

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into op ...

Gas scrubbers, flue gas scrubbers KW 300 WT according to the enclosed product description and photos Price from place, loaded.

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

AGFA AccuSet 1000 WE. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

Cat.-Nr. 10-1735 in a very good condition with Mixer on the top With Manhole on the top 400 mm With Airlock DN 300 With CIP Cleaning System With Inlet DN 50 With thread Connector DN 50 With Level Indicator With Mixer on the side With Conical Bottom with Outlet DN 50 On 4 Adjustable Feet Measurements: Total Height: 4000 mm Body Height: 2450 mm Diameter with out Mixer: 2400 mm Diameter with Mixer: 2800 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

Capacity/h: 6000 P/h Condition: excellent, ready for operation Tetra Pak TBA 8 1000 ml Slim Line Filling Machine with Screw Cap Applicator TCAP 47 consists of: TBA 8 1000 ml Slim Line Filling Machine V100, Pull Tab Applicator PT 8, Tetra Cap Screw Cap Applicator TCAP 47. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 Slim Line 1000 ml Filling Machine with ReCap 2 consists of: TBA 8 1000 ml Slim Line Filling Machine, Pull Tab Applicator PT 10, Tetra Cap Screw Cap Applicator ReCap 2 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.