AMADA used machine for sale

Hydraulic press brake: AMADA type ITS 80-25, rb: 1990, very durable model from the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm Loading: 300 mm, stroke 105 mm; Pressure: 80 t Cybelec DNC70PS CNC-controlled press, Polish language. Controlled axes -Y-X, automatic table bending compensation. Machine weight 4.5 tons. Drives 6 kW. Tools - set, Amada standard. Full Operation and Maintenance Manual, BiHP position manual in Polish.

Hydraulic press brake: AMADA type HFBO 170-4100, rb: 2000, a very durable model from the best manufacturer of this type of machines. Bending length: 4100 mm; Between columns: 3650 mm, Loading: 300 mm, stroke 200 mm; Pressure: 170 t. CNC-controlled press Operateur OPEII, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 13.8 tons. Drives 13 kW. Tools - set, Amada standard segment tools - brand new. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 15062 production hours, of which 6815 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW.

Cutting length: 3100 mm x 6 mm, full CNC control. Variable knife angle and knife gap, set by the computer after entering the gr. and length of the material. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6.5 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Hydraulic press brake: AMADA type HFBO 80-2550, rb: 2012, the latest model of the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm, Loading: 300 mm, stroke 200 mm; Pressure: 80 t. CNC-controlled ABPad press, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 5.8 tons. Drives 9 kW. Tools - set, Amada standard segment tools. Symbolic number of hours worked. Machine condition - like new. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Hydraulic press brake: AMADA type HFT 170-3, rb: 2003 Bending length: 3100 mm; Between columns: 2650 mm 200 mm stroke; Pressure: 170 t CNC controlled press CD2000, color, language. Polish. Controlled axes -Y1-Y2-X1-X2 + automatic table bend compensation. Machine weight 11.6 t. Drives 16.5 kW. Tools - Brand new Amady standard tools - 4 SLOT + PUNCH. Upstream - 18,000 rh. Full original DTR, workplace health and safety instruction in Polish.

This AMADA ARIES 245 (1993) Punching machine was manufactured in 1993 in Croatia. This CNC Punch Press has a capacity of 200 kN (44093 lb) and 19 tools. It operates at 11 KVA power and weighs 7.5 tons (16535 lb). The power supply is three-phase with voltage options of 460/400/230/230 volts and frequencies of 60/50/60/50 Hz, with a trip current of 7.5/7.5/10/10 KA. Contact us anytime for further information.

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

This AMADA LC 2415 alpha 4 NT Laser Cutting machine was manufactured in the year 2011 in France and has 11750 production hours. It is equipped with an AMADA AMNC control unit. The machine has a laser power of 2,5 kW.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!

This AMADA LCV 3015 3KW + Automation/storage Laser cutting machine was manufactured in the year 1998 in Japan and has 69228 production hours, of which 7830 are cutting hours. It is equipped with a Fanuc FS16LB EXP control unit. The machine has a laser power of 3 kW.

This AMADA LC 1212 A3 Laser cutting machines machine was manufactured in 2005 in Japan and has 39506 production hours. It is equipped with a FANUC control unit. The machine has a laser power of 2,0 kW.

This Amada LC 2415 A3 Laser cutting machine was manufactured in the year 2002 in Japan. It is equipped with a Fanuc Series 160i-L control unit. The machine has a laser power of 2,0 kW.

This AMADA LC-2415 alpha III Laser Cutting machine was manufactured in the year 2004. It is equipped with a Fanuc FS-160iLA CNC control unit and has 3 axis. The machine has a laser power of 4,0 kW.

This AMADA LC3015X1NT 4kW Co2 (2007) Laser cutting machine was manufactured in 2007 in Netherlands. This machine has a 4.0 kW Co2 resonator and can accommodate sheets up to 3000x1500 mm in size. Contact us anytime for further information.

This Amada LCV3015B2 Laser cutting machine was manufactured in the year 1998 in Japan and has 69228 production hours. The machine has a laser power of 3,0 kW.

This AMADA LC-2415 A3 Laser cutting machine was manufactured in the year 1999 in Japan. It is equipped with a FANUC Series 160i-L control unit and a FANUC C-3000 D laser with 3kW laser power. The laser can cut 12 mm mild steel and 6 mm stainless steel. See tech specs (DE) as PDF attached.

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

Hydraulic press brake: AMADA type HFB 170-40, the best model of the best manufacturer of this type of machine. Bending length: 4100 mm; Between columns: 3750 mm Loading: 400 mm, stroke: 180 mm; Pressure: 170 t CNC controlled press Delem DA58, graphics, Polish language. Axes controlled -Y1-Y2-X1-X2-R1-R2 + automatic compensation of table bending . Machine weight 13.5 t. Drives 13 kW. Tools - complete, sectional tools of Amada standard, Amada quick release chucks. Full original DTR, also in Polish, the BiHP workstation manual in Polish.

Hydraulic press brake: AMADA type HFBO 50-20, rb: 1996, a very durable model of the best manufacturer of this type of machine. Bending length: 2050 mm; Between columns: 1650 mm; Loading: 300 mm, stroke: 200 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 4.8 t. Drives 6 kW. Tools - complete, segmented tools of Amady standard . Full original DTR, instructions to the machine and control in Polish, the instruction manual BiHP in Polish.

Hydraulic press brake: AMADA type HFE 130-40. Bending length: 4100 mm; Between columns: 3750 mm Loading: 400 mm, stroke 200 mm; Pressure: 130 t CNC controlled press Operator II, graphics, Polish language. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 12 t. Drives 12 kW. Tools - complete, sectional tools of Amada standard. Full original DTR, also in Polish, a job instruction BiHP in Polish.

This AMADA HFT 50-20 Bending Machine was manufactured in 2009 in France. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press brake has operated 11,377 hours so far. Check photo gallery for more details. Contact us anytime for further questions!

Hydraulic press brake: AMADA type HFP 130-30 NT, rb: 2007, the highest model of the best manufacturer of this type of machine. Dual speed X,R and Z axis. Bending length: 3100 mm; Between columns: 2650 mm, Loading: 350 mm, stroke 200 mm; Pressure: 100 t CNC controlled press Amada AMNC PC, 3D graphics, Polish language, TFT screen 15 color. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 8,5 t. Drives 12.5 kW. Fiessler lasers. The machine complies with the CE Machinery Directive. Tools - complete, segmented tools. Full original DTR, instructions for the machine and control in Polish, health and safety manual in Polish.

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and the vertical stroke at 200 mm. The machine counter shows 8337 hours.

feed length: 0-800 mm : : Max. 250mm Schnitt automatic: weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2000 x 1750 x 1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Resonator power 4000 W 2000 W Working range X and Y: 3420 x 1550 mm Z-axis working range: 200 mm Max. table load: 920 kg CNC: AMNC3i Weight: 10500 kg

Machine is under power and can be inspected. The machine comes with the latest 3i software.