werner _ pfleiderer 고무 기계 사용 판매를 위해

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Lab Mixer Tangential Chamber volume 2,8 l / 2 l netto Sliding door AC motor 22 kW Year 1971

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

Refer to code 1004 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1006 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Refer to code 1013 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1001 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1125 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

chamber volume: 4 und 5 liter useable volume: -- liter friction: - motor drive power: 2x 37,5 kW Condition: used or reconditioned Specification: 2x laboratory internal mixer – used Consisting of two mixing chambers: Type: GK4N - Capacity: approx. 4 litres - Rotor geometry: tangential type - Ram: pneumatic - 1 independent DC motor: 37.5 kW Type: GK5E - Capacity: approx. 5 litres - Rotor geometry: Interlocking rotors type - Ram: Hydraulic - 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due to severed cables, or refurbished with new electrical parts, with CE certification and warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1126 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

Key data: 38 liter, 25 liter

Werner & Pfleiderer Mixer Model GK12 Rotor type Tangential Total chamber volume 38 L Unable volume. 25 L Complete with motor Electrical control panel Chamber dims: 40x40x40cm = 0,064m3 Rubber used: EPDM, Natural EPDM, NR BR.

Qty 1 x Werner & Pfleiderer tangential (Banbury type) Lab internal mixer, Type: GK-1.5N Year: original 1982 Volume: 1,5 L Friction: fixed Gear-box ratio i:1: 13,51 / 15,00 Rotor Speed: variable Ram: pneumatic Discharging: drop door Drive: 22 kW, 440V DC variable speed. Automatic lubrication. In very good condition. Complete with electrical controls etc. Overall dimensions (approx) 2m x 1m x 1.8m high, weight: 1.8ton

1 x Werner & Pfeiderer (Homrich) model LH30A Banbury type internal mixer, Machine no. 1134/Kom nr: 68314, original year: 1969, Hydraulic drop door, chamber volume: Useful 41 litre, Batch weight: 37kg at SG 0.9, 49kg at SG 1.2 and 57.5kg at SG 1.4, pneumatic hopper, full unidrive gearbox Input 1500rpm, output 45/50rpm, with 150kW DC variable speed motor. Mechanically in very good condition, but without electrical controls.

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum