sorbini 래커 기계 사용 판매를 위해

Manufacturer: Sorbini, Type: VA/32-AT, Year: 1999, Number of units: 1, kW Leistung Motoren: 1,2, Working width mm: 1350, Operating side: links, Wight approx. kg: 1260, Year :1999

Manufacturer: Sorbini Lackersatzwalze Moosgummi 1300 mm gebraucht muss geschliffen werden, Sorbini: yes, Roller rubber coating: Moosgummi defekt, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca.210,

SPECIFICATIONS: Machining width: max. 1300 mm Processing thickness: max. 80 mm Installed power: 9 kW 01 Low Pressure Pump 04 Painting units COMPOSITION: AGGREGATE I Dosing Unit Steel roller Speed adjustable via the CN control Power: 0.75 KW Speed: 1400 rpm AGGREGATE II Applicator Roller: Ø 250 mm rubber Power: 0.75 kW Speed: 1400 rpm AGGREGAT III Filler Steel roller Power: 0.75 KW Speed: 1400 rpm AGGREGAT IV Dosing Unit Steel roller Power: 0.75 kW Speed: 1400 rpm Control: SORBINI

Manufacturer: Sorbini / Tagliabue, Type: Walzstrasse, Year: 1998, Work piece width min-max mm: 1.300, Min.-max. workpiece height in mm: 3 - 80 , Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 6 - 24, Inlet conveyor: yes, Lackwalze 1: T/20-MF, UV Trockner 1: 1 Lampe, Lackwalze 2: T-20-MF, UV TRockner2: 3 Lampen, Lackwalze 3: T-20MF, UV Trockner 3: 3 Lampen, Paint sander: TAG 13KS DPSTRA, Paint rollers: 3, Year :1998

Manufacturer: Sorbii, Type: Smart Coater M, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: ca 3 - 80, Operating side: rechts, Working height: 880, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: ca 5 - 25, Auftragswalzengeschwindigkeit m/min min-max: ca 5 - 25, Roller lift out: yes,

Sorbini: yes, Rubber coating length cm: 1450, Shore Härte: 25, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca 220,

Manufacturer: Sorbini, Type: VS/32-BT, Year: 1999, Dust removal brush: yes, Brush type: Fibre, Diameter of brushes: 220, Compressed air cleaning: no, Number of units: 1, kW Leistung Motoren: 1,2, Units mounted upright: yes, Fast exchange device: yes, Working width mm: 1350, Through running hight mm: 120, Vacuum belt: no, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 6-25, Operating side: links, Wight approx. kg: 1260, Year :1999

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Control: Cefla, Work piece width min-max mm: 1350, Durchlassbreite min-max mm: 1350, Working height: links, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): yes, Auftragseinheit 1 shore härte: yes, Auftragseinheit 1 : yes, Gummierung mm: 5-12, Shore härten möglich: yes, Shore: möglich, Durchmesser Auftragswalze mm: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Manufacturer: Sorbini, Type: T/20-SP, Year: 1999, Working width min-max mm: links, Arbeitshöhe min- max mm: yes, Durchlassbreite min-max mm: 5-25, Operating side: 15, Working height: EPDM, Lackauftragseinheiten: yes, Spachteleinheiten: yes, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: 5-20, Auftragswalzengeschwindigkeit m/min min-max: yes, kW - Leistung Auftragswalze: 1350, Stärke Gummierung min-max mm: 5--25, Stärke Gummierung mm: yes, Dosierwalze verchromt: yes, Reverse und Gegenlauf: Band, Glättewalzengeschwindigkeit: membrane, Year :1999

Sorbini: yes, Rubber coating length cm: 1310,

Manufacturer: Sorbini Moosgummiwalze, Sorbini: yes, Rubber coating length cm: 1298, Shore Härte: Moosgummi alt,

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

This SORBINI SmartCoater SP1 was manufactured in 2009. It features a working speed of 5–20 m/min and can handle workpiece widths up to 1,350 mm and thicknesses up to 100 mm. It includes SUPERFICI UV lamps and a VENJAKOB conveyor belt, enhancing its efficiency in wood production. For more information about this machine, please reach out to us.

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Program: yes, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-120, Durchlassbreite min-max mm: 1350, Working height: links, Lackauftragseinheiten: 980, Vorschub Transport m/min min - max: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): 15, Dosierwalzenschwindigkeit m/min min-max: EPDM, Auftragseinheit 1 shore härte: yes, Auftragseinheit 1 : yes, Gummierung mm: 5-12, Shore härten möglich: yes, Shore: möglich, Durchmesser Auftragswalze mm: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Work piece width min-max mm: 1350, Durchlassbreite min-max mm: 1350, Working height: links, Lackauftragseinheiten: 900, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): 12, Dosierwalzenschwindigkeit m/min min-max: 50, Auftragseinheit 1 shore härte: yes, Auftragseinheit 1 : yes, Gummierung mm: 5-18, Dosierwalze 2: 1300, Auftragseinheit gelasert: 5-25, Rillen/cm: 1400, Shore härten möglich: yes, Shore: möglich, Durchmesser Auftragswalze mm: yes, Glättewalze mm: yes, Glättewalzengeschwindigkeit: Band, Dosierwalzenschwindigkeit m/min min-max: Membrane, Type of transportation: 2,5, Strassenbetrieb: 1200, Working hight approx mm: 1520, Year :1999

Manufacturer: Cefla-Sobini, Type: Spachtelwalze SP1, Year: 2003, Control: Sorbini, Operating side: links, Working hight mm: +/- 920, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 5 - 30, Gummierte Auftragswalze mm: ca 12, Gummiqualität : ca. 50 Shore, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Direktantrieb Glättwalze: yes, verchromte Glättwalze mm: yes, Auftragswalzenbreite mm: 1450, Dosierwalzenbreite mm: 1450, Glättewalzenbreite mm: 1450, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 3 - 80, Feeding speed min/max: 5 - 30, Roller lift out: yes, Hight adjustment by engine: yes, Carriage: yes, Anschluss für Betrieb in zentralgesteuerten Lackieranlagen: yes, Type of transportation: Band, Wight appr ...

Manufacturer: Sorbini, Type: T 20 MF, Year: 2000, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-120, Operating side: rechts, Working height: 100, UV-laquer roller: yes, regelbarer Direktantrieb für Auftragswalze: yes, Gummierte Auftragswalze mm: yes, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Widht of roller coater: 1350, Widht of metering roller: 1350, Attachment bracket roller: yes, everse drive: möglich, rbakel: yes, Feeding speed min/max: 10-22, Hight adjustment by engine: yes, Pump system: Membrane, Conveyor: Rolle, Year :2000

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Program: yes, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-120, Durchlassbreite min-max mm: 1350, Working height: links, Lackauftragseinheiten: 980, Vorschub Transport m/min min - max: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Auftragseinheit 1 shore härte: yes, Gummierung mm: 5-15, Dosierwalze 2: 1400, Auftragseinheit gelasert: 5-25, Shore: möglich, Stärke Gummierung mm: 120, Dosierwalze verchromt: 150, Dosierwalzen Gleich und : 5-25, Reverse und Gegenlauf: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Curtain coater for flat pieces 2 coating heads, each with a pump Usefull coating width: 1300 mm Working heigth: 850 mm. Workpiece transport by interrupted belt 3x length 3000 mm Feed speed 20 - 120 m/min power 3,9 kW

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1?) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2?) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250  ...

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

Spare parts of the SCM group directly from Italy

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration