ruchser 윈도 생산 기계 사용 판매를 위해

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Dimensions (L,W): - mm Weight: - kg adjustable height (yes/no): ja 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1100x1000 mm : 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000,3000 mm Working width: 200 mm Wheel width: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...

0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Equipment demonstration machine, alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with ...

Number of motors: 2 Stück 0: 2380 mm Control: , 0 RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 ...

Number of motors: 2 Stück 0: 2650 mm Control: , 0 Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle  ...

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

Dimensions (L,W): , mm Weight: ca. 90 kg adjustable height (yes/no): ja stroke: 300 - 800 mm surface of working table: 1.700 x 1.500 mm table width: max. 3.800 mm 0: ca. 130 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja Working width: 3000 (3500) mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 2000,3000,4000 mm Weight: 100 kg tiltable yes/no: nein nein Assembly glazing and sealing stand with lifting device RU -S1 Stop - and assembly table standing, length 2000 mm, width 700 mm Plant height 1600 mm, lifting device with pneumatic 300-1000 mm, Space than roller conveyor , roll length 200 mm, roller pitch 200mm. Roller conveyor height adjustable 280-350 mm. Contact surface with Felt strips and a height-adjustable rubber roller bar at the bottom to Top . Conditioning grille to protect the edges , left and right respectively one Role as edge protection for elements up to 2500 mm height. Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm, 2 shelf boards, load capacity 300 kg. alternatively : ------------- RU -S2 Stop and assembly table standing . Same as RU -S1 However, length 3000 mm alternatively : ------------ RU- S3 Stop and ass ...

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm ...

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. -------------------------------------- Price in this version on request! Plus packaging/shipping Additional prices: --------------------- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugg ...

Clamp length: , mm Clamp width: , mm 0: , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames f ...

Ruchser Side Trolley Type RU-WAL Year of manufacture 1997 Side trolley with tool tray and tool feeder For compressed air and electrical appliances Boom for equipment suspension 2500 mm long With 4 compressed air and 4 electrical connections each 2 shelves A row of storage boxes for screws and other small parts Drawer With 4 swivel castors with a diameter of 150 mm, 2 of which have a stop device

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250  ...

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

Spare parts of the SCM group directly from Italy

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP