multivac 수축 기계 사용 판매를 위해

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Used packaging machine by Multivac model R 530. New 2007. Throughput up to 10 bars/min (8 pcs/min). Format Wedges Film machine : - bottom hard width 450 mm, thickness 400 µm - upper soft width 450 mm, thickness 88 µm Included: - templates for product insertion - traverse for printing on packaging with Hitachi printers - spare cutting bar sharpened by Multivac packed in a box - spare sealing plate - spare seal for sealing mould - inserts for changing the depth of the extruded film - basic set of spare parts - documentation and instruction manual Media connection : - current : 400v Rated power 20.5kW Rated current 47A - Air: Pressure min. 6-7 Bar - water: pressure approx. 3 Bar flow rate 2l/min Dimensions: L 9600mm W 1100mm H 2070mm

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Multivac A300 Vacuum packer Serial: 6818 2004, stainless vac packer, 450mm sealing bar, 2.7Kw, mobile, 3Ph

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024

Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good

Producing 14g + 20g portions – 32 portions per cycle for catering trade Rarely available with this format. Perfect for portions of jam, ketchup, butter, stock, ice cubes etc.

Film width: 422 mm It has only run for 867 hours.

Tooling: 4 x 2; approx size 212 mm x 115 mm Film width: 563 mm

• Semi-automatic table-top device with manual object feed and foot switch • For attaching a security label to the lid flap • Multivac MR143 label dispenser, height and cross-adjustable • Label width max. 100 mm • Diameter of label roll max. 380 mm, core diam. 38 mm • Label code reading • Label applicator as format part 60 x 60 mm • Label applicator prism adjustable max. 280 x 280 mm • Electrical connection 230V/50Hz • Table is not supplied

Multivac tray sealer T 700 used for fresh meat with oxygen gassing Length: 4.9 mtr. Control IPC 05 Duplex vacuum pump: 600 cbm/h Shells/Tools: 190x144, Deep 75mm 227x178, Deep 50mm included in the price: 1 x Carsoe conveyor belt L 5 mtr. with 2 destacking heads

Multivac C500 Twin Chamber Vacuum Packer Model: C500 Built 1997/98 Twin chamber Working order

Vacuum Packer Make: Multivac Model: C400 Single Chamber x2 units available Built 1998 approx

Multivac T700, The dimensions of the trays are 187x137 ( approx.) and 145x125 (approx.).

Chamber dimensions X/Y/Z: approx. 460mm/550mm/200mm, welding bars: 4, welding bar length: 440mm, welding seam: double-seam separation sealing, machine dimensions X/Y/Z: approx. 1000mm/950mm/1100mm, weight: approx. 600kg. On-site inspection is possible.

Find photos attached

Height=1.35 m, Overall length= 1.05 m, Overall width= 1.6 m, Net weight= 630 kg,

Height=2.01 m, Overall length= 0.85 m, Overall width= 4.85 m, Net weight= 1260 kg,

Machine is in good working condition. Parts shown by hand not come.

Height=2.2 m, Overall length= 1.2 m, Overall width= 10.5 m, Net weight= 4000 kg,

A semi-automatic tray sealer Multivac is available. Cycle performance: 3-12 tray cycles/min, max. tray dimensions X/Y: 380mm/300mm, max. tray height: 110mm, max. film width: 450mm, max. film diameter: 250mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1650mm, weight: approx. 300kg. An on-site inspection is possible.

Height=1.62 m, Overall length= 2.56 m, Overall width= 0.8 m, Net weight= 335 kg,

Height=1.05 m, Overall length= 0.95 m, Overall width= 1.24 m, Net weight= 385 kg,

Height=2 m, Overall length= 1.05 m, Overall width= 7.75 m, Net weight= 2500 kg,

Height=2.15 m, Overall length= 1.03 m, Overall width= 7.8 m, Net weight= 2500 kg,

A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Height=1.62 m, Overall length= 0.8 m, Overall width= 1.29 m, Net weight= 335 kg,

2005 Multivac R 240, hard and soft film, film width 355 mm, take-off 200 mm, sandwich preheating, stamps heated, MAP, MC 96-2 control, upper stroke at mould and sealing station, soft and hard film cutting, outfeed belt and residual film rewinder, central lubrication, automatic chain lubrication. Top condition-ready for use.

Used Multivac R 105 packaging machine. 2 pieces available. New: 2016 and 2022. Power supply: 400/230 V / 50 HZ Phases: 3/N/PE AC Nominal power: 4 kW Nominal current: 18 A

A tray packaging machine Multivac including an auxiliary packaging machine MCS 260 is available. Tray dimensions X/Y 1: 187mm/137mm, film width 1: 335mm, tray dimensions X/Y 2: 340mm/128mm, film width 2: 315mm, max. cycle rate: 15cycles/min, throughput: approx. 45trays/min, max. tray depth: 130mm. Machine dimensions X/Y/Z: approx. 4500mm/1050mm/2100mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

Height=1.8 m, Overall length= 1.05 m, Overall width= 3.44 m, Net weight= 1045 kg,

Tray Sealing Machine – MULTIVAC T200, Manufacturer: MULTIVAC, Model: T200, Machine type: Semi-automatic tray sealing machine, Description, The MULTIVAC T200 is a compact semi-automatic tray sealer designed for professional food packaging applications. The machine seals pre-formed trays with film, providing secure and hygienic packaging for a wide range of food products., The T200 is known for its reliability, simple operation, and compact design, making it ideal for small to medium production environments., Technical Specifications, - Manufacturer: MULTIVAC, - Model: T200, - Machine type: Semi-automatic tray sealer, - Packaging type: Pre-formed trays with sealing film, - Operation: Manual loading with automatic sealing cycle, - Construction: Stainless steel hygienic design, - Control: Digital control panel, Key Features, - Compact tabletop tray sealing machine, - Suitable for various t ...

Height=2.05 m, Overall length= 1.15 m, Overall width= 3.87 m,

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

Toothed sticking knife for packing machine. 10 pieces approx. 260 mm long handle recording according to drawing or sample. Please separately request.

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspe ...

Used labeling machine SACMI RMF/RA 1320 15T up to 8000 bph Introduction to the SACMI machinery The used SACMI RMF/RA 1320 15T labeler represents a high-performance solution in the bottling sector. Produced in 2006, this model naturally stands out for its ability to process up to 8,000 bottles per hour (bph). Which definitely offers high operational efficiency. The machine is equipped with 15 label application heads, ensuring certainly precise and quality application. Technical features of Used labeling machine SACMI RMF/RA 1320 15T up to 8000 bph The SACMI RMF/RA 1320 15T model is configured with the S2 E2+S3 E3 ADH+CE+CM type, a configuration that underlines the extreme versatility of the equipment in managing different types of labels. With the integration of three self-adhesive stations and two cold glue stations, the machine offers extensive possibilities for customizing the labeling ...

Used SIDEL ROLLQUATTRO F45 Labeling Machine up to 20000 bph Introduction of the Used SIDEL ROLLQUATTRO F45 In the dynamic realm of beverage manufacturing, ensuring accuracy and efficiency in labeling processes is paramount. This is exemplified by the comprehensive work performed by the used SIDEL ROLLQUATTRO F45 labeling machine,renowned for its capacity to handle up to 20000 bottles per hour (bph), which stands as a testament to cutting-edge labeling technology. Technical Specifications Introduced by Sidel in 1999, the SIDEL ROLLQUATTRO F45 is specifically engineered for PET containers. Its versatility shines through, as it can accommodate bottle sizes ranging from 0.33 L to 1.20 L, ensuring adaptability across various product lines. Operational Details Powered by 36 meticulously designed plates and mechanical cams, the machine guarantees precise label positioning with each cycle. Moreo ...

Used Capsuling Machine Nortan UNICAP 35 S+R up to 1000 bph Introduction to the Used Capsuling Machine Nortan UNICAP 35 S+R up to 1000 bph The Used Capsuling Machine Nortan UNICAP 35 S+R up to 1000 bph, indeed, offers a technical solution for oenological and bottling industry professionals who need a reliable, overhauled machine capable of maintaining a continuous production flow of up to 1,000 bottles per hour. Moreover, Nortan produced this used capsuling machine, and it incorporates a single-head smoothing distributor designed specifically for sparkling wine capsules, therefore making it particularly suitable for bottling lines that produce sparkling and effervescent wines. Mechanical Structure and High-Quality Materials The machine relies on a painted iron frame that provides mechanical solidity and withstands the stress inherent in intensive bottling environments. Furthermore, stainl ...