microcut 보링 밀 및 머시닝 센터 사용 판매를 위해

Weight: 350 kg Dimensions (L/W/H): 1930,0 × 1850,0 × 2490,0 mm x-axis: 610 mm y-travel: 305 mm z-travel: 520 mm table length: 760 mm table width: 360 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 610 mm y-travel: 455 mm z-travel: 520 mm weight of the machine ca.: 3,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 760 mm, 430 mm, 450 mm

Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg

Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

control: SIEMENS 828 D for axes: 4 x-travel: 1800 mm y-travel: 800 mm z-travel: 700 mm table surface area: 1960x750 mm tool magazin:: numbers of tools: 24 max. tool diameter: 110 mm max. tool length: 300 mm max. tool weight: 15 kg spindle taper ISO: 50 spindle turning speed - stepless: 0-6000 U/min spindle drive: 18.5 kW feeds -stepless-: 0-10000 mm/min rapid motion -longitudinal/cross/vertical: 10 m/min voltage: 400 V dimensions of machine: 5000x3630x3295 mm weight: 16 t rotary table:: GSA+ CNC-320R tail stock: TS-B21 Coolant through spindle: pressure: 20 Bar 3D measuring tracer: RENISHAW OMP-60 Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2200 mm y-travel: 1600 mm z-travel: 1600 mm spindle turning speed range: 35 - 3000 U/min spindle drive motor: 18,5 / 15 kW spindle taper ISO: 50 w-axis: 500 mm table surface area: 1250 x 1500 mm Table load: 5000 kg T-slot - width: 22 H8 B-axis (table): 0,001 ° Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/min total power requirement: 50 kVA weight of the machine ca.: 21,5 t dimensions of the machine ca.: 7,8 x 4,8 x 3,7 m Assembly 2018 - CNC control FANUC 31i-B - Tool changer 60-fold (ISO 50) - Coolant system with IKZ 20bar - Chip conveyor - Renishaw OMP 60 - Universal milling head - Angled table (2) - CE only approx. 800h running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8113 Type: M 1050 Producer: Microcut Created: 2021 Parameters: Control system: Heidenhain TNC 620 Switch-on hours: 4727 h Operating hours: 2942 h Work table length: 1200 mm Work table width: 600 mm Number of stacking positions: 30 Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of T-slots in the table: 6 pieces

Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg

frequency: 50 Hz weight of the machine ca.: 2,510 t dimensions of the machine ca.: m 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30 x 14.3 Max Table Load: 550 LBS X Axis: 24 Y Axis: 12 Z Axis: 20.47 Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MICROCUT CHALLENGER BNC-2640X, year 2006 -Fagor 8055 -Maximum turning length 1500 -Spindle bore 105 -Turning diameter in the offset 790 -Turning diameter over bed 550 -Turning diameter via face slide 310 -Rod passage 69 mm -X-Path 300, Z-Path 1650 -8 tool positions

A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

turning diameter: 890 mm turning length: 3000 mm turning diameter over slide rest: 550 mm control: Fagor 8055i ATC Revolver: 8 tail stock: MK 6 turning dia. in gap: 1220 mm length of gap: 450 mm spindle passage: 106 mm turning speeds: 15-1480 U/min 3-jaw chuck: 400 mm steady: 300 mm chip conveyor: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was creat ...

turning diameter: 475 mm turning length: 1500 mm control: Fagor 8055T Revolver: 8 turning diameter over slide: 240 mm turning dia. in gap: 710 mm length of gap: 350 mm spindle passage: 51 mm turning speeds: 100-4500 U/min Power: 7/11 KW 3-jaw chuck: 250 mm steady: 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...

This 3-axis MICROCUT V-30 The Challenger was manufactured in 2016. Ideal for precision machining, this vertical machining center ensures reliable performance. Consider the opportunity to buy this MICROCUT V-30 The Challenger vertical machining center. Contact us for more information.

This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger machining center. Contact us for more information about this machine.

This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine.

turning diameter: 550 mm turning length: 3100 mm control: Fagor 8055T turning diameter over slide: 310 mm turning dia. in gap: 790 mm length of gap: 283 mm spindle passage: 51 mm turning speeds: 80-3500 U/min Power: 15 KW 3-jaw chuck: 250 mm steady: 220 mm workpiece weight: 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS  ...

turning diameter: 550 mm turning length: 1100 mm control: Fagor 8040T turning diameter over slide: 230 mm turning dia. in gap: 740 mm length of gap: 350 mm spindle passage: 72 mm turning speeds: 100-4500 U/min Power: 7,5 KW 3-jaw chuck: 250 mm steady: 220 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution  ...

turning diameter:230 mm turning length:810 mm centre distance:1.000 mm turning diameter over bed:460 mm spindle passage:56 mm chucking diameter:200 mm turret head:8 x VDI 30 Pos. turning speeds:3.100 1/min max. workpiece weight:570 kg spindle motor:18 kW dimensions of the machine ca.:3,7 x 1,9 x 1,8 m weight of the machine ca.:2,9 t teach-in lathe, PARAT tooling-system, hand operated collet chuck, 3 jaw chuck, 4 toolholders

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

Centerless cylindrical grinding machine KÖNIG & Bauer M130 MULTIMAT 130 Condition: very good, used Specifications Grinding wheel rotation speeds 35/45 (60) m/sec. Largest grinding diameter 35 mm Smallest grinding diameter 0.8 mm Maximum workpiece length for continuous grinding approx. 200 mm Maximum workpiece length for plunge grinding 130 mm The machine can be viewed by arrangement in our factory in Krefeld. – Errors, modifications and prior sale excepted –

LIDKÖPNG CL 4B Centerless Grinding Machine Specifications Working range workpiece diameter: 1 - 150 mm Longest workpiece length in the grooving process 300 mm Abrasives: Largest outer diameter 508 mm Smallest outer diameter 365 mm Normal width of the abrasive media 254 mm Largest abrasive media width 305 mm Control body: Largest outer diameter 330 mm Smallest outer diameter 255 mm Normal width of the control body 254 mm Largest regulating body width 305 mm Normal speed (infinitely adjustable) 0-115 rpm Power: Main motor, maximum 37 KW Total requirement approx. 42 kW Weight approx. 7 t Space requirement: approx. 4 x 4.2 m The machine can be viewed by appointment in our factory in Krefeld. – Errors, changes and prior sale excepted –

LIDKÖPNG CL 4B Centerless Grinding Machine Specifications Working range workpiece diameter: 1 - 150 mm Longest workpiece length in the grooving process 300 mm Abrasives: Largest outer diameter 508 mm Smallest outer diameter 365 mm Normal width of the abrasive media 254 mm Largest abrasive media width 305 mm Control body: Largest outer diameter 330 mm Smallest outer diameter 255 mm Normal width of the control body 254 mm Largest regulating body width 305 mm Normal speed (infinitely adjustable) 0-115 rpm Power: Main motor, maximum 37 KW Total requirement approx. 42 kW Weight approx. 7 t Space requirement: approx. 4 x 4.2 m The machine can be viewed by appointment in our factory in Krefeld. – Errors, changes and prior sale excepted –

Centering vise PAGUS jaw height: 50 mm span: 0...95 mm on table with graduation 360° rotatable Dimensions: 330 x 255 x 160 mm

Centering disc, tube clamp PAGUS Ø 300 - 340 mm used, tested ! Dimensions: 340 x 340 x 50 mm

Spindle with centering tip, clamping device PAGUS clamping range: 145 mm base plate 215 x 100 mm shaft diameter: Ø 40 mm Handwheel diameter: Ø 250 mm Dimensions: 600 x 250 x 250 mm

Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm

Centering Vise, Centric Clamp PAGUS Jaw Width: 100 mm Jaw Height: 55 mm Wingspan e: 0...70 mm can be rotated on carriage with millimeter scale - 70 - + 70 mm on a rotary table with graduation: - 90° - + 90° 360° rotatable ! used, tested ! Dimensions: 270 x 270 x 140 mm

Centering vise, centrifugal clamp PAGUS jaw width: 200 mm jaw height: 50 mm span: 0...200 mm on rotary table with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

grinding diameter max.: 30 mm regulating wheel width: 12 mm max. width of grinding wheel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 100 mm regulating wheel width: 200 mm max. width of grinding wheel: 200 mm grinding diameter: 100 mm grinding length: 250 mm feed in: mm working area: mm speed: m/min Bar length: mm total power requirement: 25 kW weight of the machine ca.: 4.500 t dimensions of the machine ca.: m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _______________________________________________________ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wh ...

Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

Grinding wheel dimensions (h x w x d x w): Ø 508 x Ø 305 x width 655 mm, Ø min/max to be ground: 5/240 mm, Min/max speed of regulating wheel (rpm): 0/115 rpm, Type of control (cnc/manual): manual, In feed Grinding (auto/manual): manual, Dimensions of the regulating grinding wheel (h x w x d x w): Ø 330 x Ø 203 x width 655 mm, Maximum length to grind in feed grinding: 655 mm, Grinding wheel head motor power: 45 hp, Total power: 60 HP, Length 3.000 mm, Width 1.400 mm, Height 1.600 mm, Weight 11.500 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x508 mm, Regulating Wheel Dimensions: Ø355xØ152,4x508 mm, Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min/max to be ground: 3 / 200 mm, Ø min/max to be rectified: 3/200mm, Grinding wheel peripheral speed (m/s): Variable with regulator, Peripheral speed of grinding wheel (m/s): Variable with regulator, Width of regulating grinding wheel: 500 mm, Regulating wheel width: 500 mm, Number of regulating wheel speeds: Infinite, No. of regulating wheel speeds: Infinitas, Min/max. speed of regulating wheel (r.p.m.): 10 / 255 rpm, Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Diamond dressing (auto/manual): CNC automatic on 2 grinding wheels, Diamond cutting (auto/manual): Automatic CNC 2 grinding wheels, Diamond speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto/manual): Automatic, Greasing (auto/manual): Automatic, Control type (cnc/manual): CNC, No. of cnc axes: 8, Plongée (auto/manual): Au ...

Rectificadora sin centros GOZUA RC 2-75

Diámetro de la muela principal 250 mm Diámetro de la muela auxiliar 200 mm Unidad de diamantado Esmerilado de alimentación pasante Filtro de papel Diámetro máximo: 50 mm

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

High: 1.400 mm, Long: 1.650 mm, Width: 1.000 mm, Weight: 2.480 kg, Voltage: 380 V, Cnc brand: -, Cnc model: -, Total power: 8 Kw, Cnc axes nº: -, Grinding wheel width: 125 mm, Diamond dressing speed: adjustable, Infeed (auto / manual): AUTOMATIC, Regulating wheel width: 125 mm, Dressing (auto / manual): Hydraulic / Manual, Ø min / max to grinding: 1/75 mm, Regulating wheel speed nº: infinite, Lubrication (auto / manual): Car, Control type ((cnc / manual): MANUAL, Maximum infeed grinding length: 125 mm, Peripheral grinding wheel speed (m / s): 30 m / s, Min / max regulating wheel speed (r.p.m.): max 350 r.p.m., Regulating wheel dimensions (od x id x width): Ø225 x Ø120 x 125 mm, Ø grinding wheel dimensions (od x id x width): Ø350 x Ø150 x 125 mm

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Manual, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 254 mm, Ø min / max to grinding: 1.5 / 125 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Diamond dressing speed: 225 min1, Infeed (auto / manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Motor power grinding wheelhead: 30 kW, Power hydraulic motor: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Weight: 8.375 kg

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min / max to grinding: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum infeed grinding length: 160 mm, Motor power grinding wheelhead: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, High: 1.440 mm, Weight: 3.000 Kg.

Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15 ...

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

Hydraulic ruler holder, Automatic grinding wheel balancer, Cover, Hydraulic working grinding wheel cover, Equipment AEROEL measurement, Hydraulic table locking, Hoist for 1,000 kg, Refrigeration in electrical cabinet, Panel tire, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min / max to grinding: 3/200 mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, No. of regulating wheel speeds: Infinitas, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Dressing (auto / manual): Automatic - CNC, Diamond cutting (auto/manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto / manual): Automatic ...

CNC, automatic balancer of wheels Balance Systems, speed variator in the grinding wheel, speed variator in the grinding wheel / CNC, automatic balancer of wheel Balance Systems, Speed ​​variator of Grinding Wheel, Speed ​​variator of Regulating Wheel,, Ø grinding wheel dimensions (od x id x width): 610 mm, Ø min / max to grinding: 1.5 - 120 mm, Peripheral grinding wheel speed (m / s): 35 m / sec, Regulating wheel width: 254 mm, Min / max regulating wheel speed (r.p.m.): 10-300 RPM, Cnc brand: FANUC, Cnc model: Power Mate - iH, Cnc axes nº: 3 + spindle, Regulating wheel dimensions (od x id x width): 305 x 127 mm x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Motor power grinding wheelhead: 22 kW, Total power: 35 kW, Voltage: 220/380 V, Long: 4,795.5 mm, Width: 3.806 mm, High: 2.355 mm, Weight: 6.450 kg, Accessories included: CNC, automatic bal ...

Automatic wheel balancer, coolant filter, ruler and grinding and grinding wheel | automatical wheel balacer, coolant filter, blade and blade support grinding wheel, Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min / max to grinding: 2/150 mm, Regulating wheel width: 355 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 20/460 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x355 mm, Grinding wheel width: 355 mm, Maximum infeed grinding length: 355 mm, Coolant system motor power: 0.70 Kw., Motor power grinding wheelhead: 37 Kw., Total power: 45 Kw., Voltage: 220/380 Kw., Long: 1.165 mm, Width: 3.3 ...

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the drive wheel head: -2/+5º, Angle of inclination of the working grinding head: +/- 5º, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg

Automatic feeder in plongeé | Automatic plongeé loader, Ø grinding wheel dimensions (od x id x width): Ø350 x 125 mm, Ø min / max to grinding: 1.5 - 50 mm, Regulating wheel dimensions (od x id x width): Ø220 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 120 mm, Motor power grinding wheelhead: 10 Cv, Total power: 8,5 Kw, Weight: 1.500 kg, Accessories included: Automatic feeder in plongeé | Automatic plongeé loader

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Manual, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15.000 Kg, Accessories included:

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min / max to grinding: 1.5 / 75 mm, Regulating wheel width: 160 mm, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): Manual, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum infeed grinding length: 160 mm, Motor power grinding wheelhead: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, High: 1.440 mm, Weight: 3.000 Kg.

Porterreglas de Plongée, Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Manual, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included: Porterreglas de Plongée