hymmen 접착제 기계 사용 판매를 위해

Manufacturer: Hymmen , Type: TLA, Year: ca.1990, 4 roller machine: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3-120, Diameter of roller coater mm: ca.230, Year :ca.1990

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

Spare roller: TLX/ELX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 200, EPDM: yes,

Manufacturer: Hymmen Ersatzwalze 1400 mm Muss gummiert werden, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Stahlkerndurchmesser ca. mm: ca 200, Rubber coating defective: yes, Can be reground: no,

Hersteller : Hymmen, Spare part from machine: Elx S Lackauftragsmaschine,

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004

Manufacturer: Hymmen, Type: SGC, Year: 1999, Control: Hymmen, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: 0,75, Glättewalze mm: yes, Glättewalzengeschwindigkeit: 5-25, Year :1999

Manufacturer: Hymmen, Type: TLX 2,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Metering roller drive m/min: ca.4-12, rbakel: yes, Compressed air bar: 6, FREE TEXT: ohne Schaltschrank, Year :1982

Manufacturer: Hymmen Lackuftragswalze 1400 mm Stahlkern 210 mm Aussendurchmesser 236, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 40, Approx. thickness of rubber coating in mm: ca.30,

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

Manufacturer: Hymmen , Type: Kaschieranlage, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1350, Working width min min mm: 300, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Casein glue plant: yes, IR zone: yes, Leimauftragsmaschine : yes, Double-sided: yes, Lamination calender: yes, Diameter of lamination calender in mm: ca.500, Press calender: yes, Rollers heated: yes, Heating medium thermal oil: yes, at top and bottom: yes, Automatical glue supply: yes,

Manufacturer: Hymmen, Type: TLX M, Year: 1992, Work piece width min-max mm: 1300, Working widht max mm: 1300, Operating side: links, Working height: ca 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Year :1992

Spare roller: Multicoater, Hymmen: yes,

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1300, Working height: links, Vorschub Transport m/min min - max: yes, Dosierwalze 1 m/min min-max: yes, Year :1995

Manufacturer: Hymmen, Type: BVK, Year: 1995, Work piece width min-max mm: 1350, Number of brushes: 2, Brushes inclinedt: 2, Working hight mm: ca 980, Year :1995

Manufacturer: Hymmen Glättewalze, Type: SGC, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1.350, Min.-max. workpiece height in mm: 3 - 80, Working height: links, Lackauftragseinheiten: ca. 980, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: links, Lackauftragseinheiten: ca 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: rechts, Year :1995

Manufacturer: Hymmen, Type: BVK, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 120, Purpose: Beizvertreiben, Number of brushes: 2, Brushes inclinedt: 2, Diameter of brushes: 150, Power per brush kW: 0,75, rotations controlled: 150-750, Feeding speed min-max m/min: 5-20, Vaccum conveyor belt: yes, FREE TEXT: Maschine bekommt neuen Schaltschrank und die Bürstengeschwindikkeit wird Drehzahl geregelt, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: rechts, Lackauftragseinheiten: ca 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Work piece width min-max mm: 1350, Durchlassbreite min-max mm: 1350, Working height: rechts, Lackauftragseinheiten: 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen Lackersatzwalze shore 50, Spare roller: TLX-ELX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1397, Approx. thickness of rubber coating in mm: 20, EPDM: yes,

Manufacturer: Hymmen, Type: TLX, Year: ca. 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Through running hight mm: Maschine wird gereinigt, geprüft und neu lackiert, Year :ca. 1990

Manufacturer: Hymmen, Type: TLX 1,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Year :1982

Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,

Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,

Manufacturer: Hymmen Stahldosierwalze Chromwalze 1400 mm 197 Durchmesser, Hymmen: yes, Roller rubber coating: Chrom, Approx. thickness of rubber coating in mm: Stahl 1400 mm, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,

Manufacturer: Hymmen, Type: TLX - M, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX-M1, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M1.0, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX M, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX M2, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hackemack Rollengang, Type: 3420, Total metres approx.: 5, Working widht mm: 1400, Total hight mm: 980, Adjustable: yes, Roller pitch mm: 100, roller diameter: 60, Length mm: 5000, Accumulation roller conveyor: Friktionsrollrnbahn, Driven: yes, Working widht mm: 1400, Width total mm: 1600, Conveyor speed m/min: 5-30, Drive power kW: 2 X 3,

Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991

A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in  ...

A roller coating machine specially designed for UV coating in the wood industry is available. Working width: 1350mm, max. workpiece thickness: 80mm, working height: approx. 980mm, application roller: 1350mm, feed speed: 5m-25m/min, machine dimensions X/Y/Z: approx. 2700mm/1200mm/1800mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

This HYMMEN TLA was manufactured in 2002. It features a glue spreader with 4 rollers and a working width of 1400 mm. Consider the opportunity to buy this HYMMEN TLA glue spreader. Contact us for more information.

Manufacturer: Hymmen, Type: JPT LW 2200/280, Operating system: Windowx XP, Software: K-Flow, Hardware: yes, AV Arbeitsplatz: yes, Bedruckbares Material: Papier,MDF,Kork, Working hight mm: 900, Nennbreite mm: 2300, Eff. Nutzbreite: 2100, Through running hight mm: max 50, Druckgeschwinidigkeit m/min : 25 (bei 360dpi), Anlagengeschwindigkeit m/min: 15-50, Single pass: yes, Year: 2010, Bedruckbares Material: Papier,MDF,Kork, Papiere: Rollenmaterial, Papierbreite min-max: 600-2100, Papiergewichte g/m²: 60-120, Papierrollendurchmesser max.: 800, Rapportlänge mm: 2600, MDF/HDF: yes, Fussbodendielen: yes, Werckstückdicke min-max mm: 5-17, Plattenbreite min-max mm: 500-2100, Plattenlänge min- max mm: 500-3000, Plattenwelligkeit mm: 3, Fussbodendielen: yes, Dicken mm min-max: 5-17, Längen mm min-max: 500-4500, Breiten mm min-max: 90-400, Welligkeit mm : 3, Tinten UV härtend: yes, Rollena ...

Manufacturer: 3 Lampen Purete UV-Trockner PRT-U3106e 120 Watt elektronische Leistungregelung 620 mm, Type: PRT-U3106e , Year: NEU, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2-80, Number of lamps: 1, kW power 1 lamp: 8,4, Lampenlänge mm: 700, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 2.300, Lamps straight installation: yes, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Abluftmenge cbm/h: 1200, Leistung Abluftventilator kw: 0,5, Working widht mm: 25, Conveyor lenght mm: 38, Outer belt width mm: 38, Working hight approx mm: 1.150, Conveyor: 5 - 25, Drive power kW: Stange, Working widht mm: 200, Weight approx. kg: 2.300 X 1.150 X 1.750, ...

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 350mm Panel thickness min 3mm Glue hot melt PUR Application rate 40-80g/m Driving power 6kW Tempering device 24kW

Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details.

Type ART. 200 Set with a single gun Pipe long 4 m Glue container 5 kg Universal nozzle Made in Italy Weight 10 kg

Glue tank with rollers for sanding machine IMA

Glue application machine for sanding machine IMA

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.

Gluing stars Polzer Floor gluing press Type: EVA - 6 E Year of manufacture 1989 6 gluing shelves with 2 special heating plates each Gluing dimension 2100 mm x 1100 mm With Leimangabestation With 2 lifting devices for loading and removing the panels With roller conveyor Workpiece thickness maximum approx. 50 mm For removal, the plate is pneumatically lifted Per floor: 7 pneumatic pressure cylinders 100 mm diameter, 100 mm stroke, compressive force 740 kg per cylinder, Movable pressure plate 250 mm x 40 mm 2 cylinders to operate the upper heating plate Insertion opening 700 mm 2 electric heating plates Each electric heating plate 220/380V, 3 kW, thermostats 0 – 120°C Operating pressure 8 – 10 bar Gluing temperature adjustable, ideally 50-65° Capacity approx. 50 m²/h With protective grille External dimensions approx. 4000 mm x 4000 mm x 3600 mm

technical details: - Number of goats: 6 pieces - Number of press beams: 6 pieces - Number of clamping wrenches: 4 pieces - Number of screeds (2,500 mm): 8 pieces - Number of wooden inserts: 6 pieces (1 x divided) Metrics: - Trestle height: 1,000 mm - Trestle width: 1,450 mm (1,410 mm) - Clamping height: 360 mm, minus the screed thickness of 140 mm = 220 mm! - Clamping area: 2,500 x 1,120 mm - Length of the screeds: 2,500 mm (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm

SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - working width 1300 mm - n. 2 rollers - Year 2004

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - /

Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg

Hot melt machine 3~, 3LNPE, 20A, 5.8 kW, 400V, 50/60Hz very little used / replacement device Complete with: 2 application heads 2 heating hoses length: 120 cm W08T200 Encoder Balluff BDG 6110-2-10-30-Z061-1200-65 Product Recognition Photocell Manual approx. 15 kg hot glue

Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.

Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at machi ...

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electric e ...

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018

Manufacturer: Böllhoff, Type: 003-050-DP, Year: 1994, Transmission ratio: 3:1, Compressed air bar max: 6, Förderleistung l/min: 8, Druckluft max bar: 8-24, FREE TEXT: Leimfilter/Leimverteiler, Year :1994

Manufacturer: Bürkle Leimauftragsmaschne 800 mm, Type: DAH, Control: no, 4 roller machine: 4, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 800, Working hight mm: 890, Diameter of roller coater mm: 240, Supply roller diameter mm: 180, Roller cleaning system: no, Main engine kW: ca.5,5, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: möglich über Umrichter, Through running machine: yes, FREE TEXT: Maschine muss überholt werden,

Manufacturer: Kremlin, Type: 16-120, Compressed air bar max: 96, Transmission ratio: 16:1, Conveying output l/min: 6, Max compressed air bar: 6, FREE TEXT: geprüft,

Manufacturer: Kremlin, Type: 2050, Transmission ratio: 16 : 1, Compressed air bar max: 96, Förderleistung l/min: 6, Druckluft max bar: 8,

Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015

Manufacturer: Hochleistungspumpe für Hochviskose Flüssigkeiten, Type: Siemens, Year: ca.2005, Control: Schaltschrank, Elektr. pump: yes, FREE TEXT: Motorleistung 1,8 kw/50 Hz, Year :ca.2005

Manufacturer: WP-ARO, Type: 666120/240/C, Year: Membranenpumpe, Control: B1050623, Year :Membranenpumpe

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014