hunkeler 포스트 프레스 : 기타 사용 판매를 위해

M.No: 4090 Width: 70 cm Thickness: about 1 cm

Three knife trimmer semi automatic Input height max 460 x 360 mm ; working condition

Index Cutting Machine Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320 mm Tools 1 straight angle tool with a small radius is included (R=1,5 or R=2mm?) Details machine has undergone a electrical and mechanical modification to ensure a safer working Available direct

HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

Gluing machine for paper Hunkeler Model LAM600 Year 1990 Width 600 mm Available Direct

Casing-in machine Hunkeler (Joba) Model BBA Year 1990's Working width 350 mm Thickness 1-100 mm (adjustable) Available Direct

Stack lifter Hunkeler AS 1000; Format 800x1200mm; Carrying capacity 1000kg; Hand or foot operation; Checks for function. Pile lift hunkeler AS 1000; size 800x1200mm; lift capacity 1000kg; Hand or foot switch; checked on function.

Automatic program Safety guard 2 x standard L knives length 320 mm 1 other tool Machine complete in working conditions, sold as is.

Good working conditions

Spine spinning machine Hunkeler, working width 50cm, in good condition, immediately available

Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.

Width 500 mm Options for PVA glue

pile lifter Hunkeler AS 1000; condition as is; only tested for function; Format 850x1200mm; Load capacity 1000kg; Manual or foot operation. Pile lift Hunkeler AS 1000; condition as is; only checked on function; size 850x1200mm; lift capacity 1000kg; hand or foot switch.

2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.

Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdeckenrundemaschine - Book cover rounding machine Hunkeler BDRM Year 1986 - Serial-No. 4808-2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vorsatzklebemaschine - End Sheet Tipping machine Hunkeler VEA 400 Year 1988 - Serial-No. 50531/10 Size min. 100x70mm - max. 420x310mm Speed 1200-6800 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40 --complete clean and painted-- Serial-No. 26964 Output 250 - 300 pcs/h Spine width 10 - 120mm Spine length up to 450mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchrückenrundemaschine - Book Back Rounding Machine Hunkeler BRM50 Year 1978 - Serial-No. 4314-9 Working width max. 500mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Registerstanze - Index Cutter Hunkeler RE 320 Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Nipping press - manual Make Hunkeler Model FNP500 Year 1980´s Width 500 x 250 mm Options up to 100 mm thickness Available Direct

We are offering a complete HL6 line, consisting of: - UW6 unwinder - HL6 laser with two laser heads - RW6 rewinder - Exhaust filter system HKU Manufacturer: Hunkeler Find more here - / Contact us at -

Kanteneinschlagmaschine / Turning-In Machine Hunkeler BE 110 Arbeitsbreite max. / Working width max. 1100mm Pneumatische Ausführung / PneumaticOperation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40 (4344/1) Serial-No. 4344/1 Output 250 - 300 pcs/h Size range Spine width 10 - 120mm Spine length up to 450mm

Laminiermaschine / Laminator Hunkeler K1000 Arbeitsbreite max. 1000mm / Working width max. 1000mm Mit Presswalze / With press roller Mit Lichtschranke / with light guard

Hunkeler HL6 laser perforator The Hunkeler HL6 is a high-performance unwinder designed for use in digital printing and paper processing systems. It´s typically used in commercial printing environments where large volumes of paper need to be fed into printing or finishing machines. The HL6 is known for its reliability, precision, and speed, making it suitable for demanding production environments. It´s often integrated into production lines alongside other printing and finishing equipment to streamline workflows and increase efficiency. Basic equipment • Basic module with web feed and outfeed • Operating console and operating panel with display for setup and easy operation • Casing with safety monitoring • Register print mark reader top and bottom • Two matrix readers top • Editor for easy preparation of laser patterns • Chiller for cooling the lasers ...

Manufacturer: Rabolini Model: Imperia Type of Machine : Die–cutting press Find more here - / Contact us at -

Antike Spindelpresse - Antique Spindel Press Krause 35286 Baujahr / Year ca. 1934 - Serial-No. 35286 Pressfläche / Press Size max. 400 x 500mm Wunderschön verarbeitete antike Spindelpresse  Beautifully crafted antique Spindel Press

Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm

Prägepresse / Hot Foil Stamping Press

Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Wunderschön verarbeitete antike Kniehebelprägepresse  Beautifully crafted antique Embossing Hot Stamping Press

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

8 color size 1270 mm<br><br><br><br>

Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition

6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort

Upright stack delivery with pressing unit; working condition

Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

WITH TABLE

Elegant effects for book covers and packaging For industrial embossing of solid grey board in bookbinding and in the further processing of fine packaging. The stabilized embossing head guarantees precise embossing even with non-centred embossing clichés. For blind, relief or film embossing of rigid, flexible and plastic cases at up to 80 cycles/min. The PE 312 processes the whole bandwidth of cover materials with blind, relief or film embossing. Can be adapted for optimal processing of different materials by stepless adjustment of temperature and embossing pressure and by adjusting embossing time in steps of 10 seconds. Matrix plate with hole grid for attaching embossing blocks. Save make-ready time by preparing the matrix plate offline. Application : • Blind, relief or hot foil stamping • Combination of micro-embossing and structure embossing Technical data : Hardcover 1 ...

Hydraulic BMF twin press 80 Atue maximum Good condition

M. No.: 121

M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available

M. No.: 700571/99-280108 Working width max. (mm): 660

Hot press Adkins OM 1000 Government machine Baujar 2015

Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.

M. No.: 2067 Working width max. (mm): 800

various book presses, in good condition, immediately available

Thermal Roll Press Type HP-2 used machine in excellent working condition CE marked year 2013 voltage 220 V 50/60 Hz

Buchpressen - Holzpressen - Book binding Press Leo Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindelpresse - Spindle Press Krause Press area max. 250 x 280mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Ryobi 2700 Size min. 90 x 130mm - max. 305 x 432mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulische Zwillingspresse - Hydraulic Twin Press Tränklein ZP 39 Serial-No. 87367728 2 Pressplatten / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Stockpresse / Spindle Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Blockleimpresse / Block Gluing Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Shinohara Fuji 52 N+P Year 1988 - Serial-No. 1001871 Size min. 105 x 148mm - Size max. 360 x 520mm Paperweight 0.04 - 0.4 mms Dampening system conventionel Plus Version Numbering and Perforation Unit Powderspray Quick clamp plate change Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDA Serial-No. HR-6462 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Blockleimpresse / Block Gluing Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kniehebelprägepresse - Embossing hot stamping press Hans Schilling HSM Serial-No. 18040 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Block size press Müro 4x5000/A3 WT; cleaned and tested; 2x dryer; insertion width 525mm; Insertion height 525mm. Padding press Müro 4x5000/A3 WT; cleaned and checked; two heaters; working width 525mm; working hight 525mm.

Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: Very good condition

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Rotaprint R 45 K Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: Very good condition

Block size press Müro 4x5000/A2 WT; cleaned and tested; 3x dryer; insertion width 700mm; Insertion height 525mm. Padding press Müro 4x5000/A2 WT; cleaned and checked; three heaters; working width 700mm; working hight 525mm.

Spindelpresse - Spindle Press Dietz Listing SP-S Pressfläche / Pressing Size max. 450 x 550mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindelpresse - Spindle Press Krause SP-S Pressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindelpresse - Spindle Press Krause SP-S Pressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)

1-Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press TOKO 2000 Serial-Nr. 100722 Druckgeschwindigkeit / Production 10.000 Sheets/hr Elektrischer Anschluss / Power supply: 230V / 50Hz / 3,7A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1974 - Serial-No. 186 403 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test