hundegger 보링 밀머시닝 센터 사용 판매를 위해

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

TECHNICAL DATA: Complete production line for Blockhaus processing consisting of 02 machines: Hundegger joinery machine model K3 and special Friulmac system model Idramat SQ The combination of the two machines allows the realization in a continuous cycle of: Bungalows Garden sheds Temporary houses Small houses Tourist accommodations Emergency accommodation

Plate Processing Machine Manufacturer: Hundegger Type: SPM-2 Speed Panel Year of Make: 2011 CNC control SPM-2 for panel format 3,200 x 2,600 mm Milling unit 6 kW Max. speed: 23,500 rpm Milling tools Outer diameter max.: 100 mm Cutting length of milling tools max.: 60 mm Z-axis: positioned + moved by spindle units 5-axis milling unit 6 kW Milling spindle motor: 6 kW frequency-controlled Max. speed: 23,500 rpm Milling unit can be rotated 360° in the Z-axis Inclination up to 46° to the Z-axis Milling tools outer diameter max.: 20 mm Cutting length of milling tools max.: 60 mm Z-axis: moved + positioned by spindle units Ink-jet labeling head Max. font height: 50.8 mm Colour prints possible Z-axis pneumatically operated, Head can be automatically swivelled by 180° Automatic stacking system Electronically controlled lift table Stroke max.: 1,000 mm Max.  ...

Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch  ...

Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed.  ...

Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...

A used PICK and FEED system from Hundegger, built in mid-2019, very good maintained condition. Available summer 2026, sale as viewed from the FRG location. The system can be demonstrated by appointment. Sale without dismantling by Hundegger.

1 used K1 carpentry machine overhauled by Hundegger in 2020 with full equipment 4-axis system, machine in one piece 18 m long and weighing approx. 15 t. Max. wood cross-section that can be processed: 300 mm x 450 mm With dovetail cutter and much more. IMMEDIATELY available, system set up and ready for demonstration. With all used tools to the system Sale as seen from location Germany without warranty. Payment immediately upon receipt of the invoice without deduction. The price is without disassembly, loading, packing, customs fees, transportation, etc. Machine is fully functional. More details will be available on your request.

Carpentry machine Hundegger k2 625 5 axis year 2003

Fully automatic timber feed with feed roller conveyor Extension of the feed cross conveyor and feed roller conveyor for timber lengths up to 13 m Feed and feed cross conveyors Under-table swivel cross-cut saw Universal milling unit 4-axis (UF4) Combined support for vertical tools Drilling rig 2.2 kW Combined support for horizontally working tools Drilling rig 2.2 kW Longitudinal and transverse groove milling machine Rear marking device (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for timber conveying incl. extension (without drive) Component ejectors Wooden shelf 5-arm Safety devices and enclosures

A used HUNDEGGER K2 Industrie Type. 1250 with full equipment – CAMBIUM production program Year of construction: end of 2019 Incl. the entire used Pick & Feed System from Hundegger Year of construction 2019 Equipment Hundegger K2 Industrie Fully automatic feeding through the Pick & Feed system Saw unit 13 KW 5 Axis Unifräse 15 KW Servo drive in the positioning carriages Suspended dust extraction Feed cross conveyor and feed roller conveyor for 16 m Zero stop for pre-elongated components Log holder in front of the universal saw Multi-length machining Lifting and lowering safety baffle plate on inlet and outlet Horizontal saw 900 mm 11 KW Turret milling unit installed vertically from above Universal Blade Milling Machine UBF 280 3 drilling rigs vertical hydraulic 2 vertical finger cutters at the bottom with 5.5 KW each 1 Drilling rig horizontal, 2.2 KW 1 drill ...

Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...

-A fully overhauled HUNDEGGER Speedcut SC2i – BJ. 2008 : - Feed cross conveyor 5 strands. - 5 axle saw. - Vertical combi : 1 x 4 axis turret cutter, 1 x drill rig 2.2KW, 1 x finger tiller 5.5KW. - Combi Horizontal : 1 x Drill 2.2KW - 1 x marking device from below. - Conveyor belt under the machine for disposal to the rear. - Preparation for airborne dust extraction (tube in the machine cabin. Immediately ready for loading. We recommend the construction and commissioning only by Hundegger.

1 used MINT ABA of Hundegger type SC 480 Speedcut year of construction end of 2023, available end of 2026, full equipment.. the customer receives subsidies and also wants to order another unit from above from Hundegger, so this system is now free. SUPER opportunity.. Sale as seen without warranty and guarantee, but of course fully functional. More details on your request. Please enter your name, address and email address.

CNC Wood Machining Centre manufactured in 1998. This HUNDEGGER K1 features a maximum workpiece length of 13,000 mm, a workpiece width of 450 mm, and a thickness of 300 mm. It includes various milling and drilling units, along with a ReaJet printer for material marking. If you are looking to get high-quality wood machining capabilities, consider the HUNDEGGER K1 machine we have for sale. Contact us for further details.

MARINUS endmatcher & defect saw, type Powermax 300, Manufacture year 2014

I am selling an automatic CNC machining center for BLOCK-HOUSE production Hundegger K2i built in 2011. Almost new machine. Built in 2015. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360° rotation, servo-hydraulic inclination 0–65° Universal 5-axis unit with round milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece by means of gripper arms. While the workpiece is measured and transported to the d ...

I am happy to offer this extremely well-maintained RD 1300 for Feb / March 2027. Equipment: Doesn't even run in 1 shift operation only for self-joinery! ROBOT-Drive carpentry machine (mirror machine) version 1250 mm for machining cross-section min. 20x50 mm to max. 300x1300 mm incl. inlet/outlet roller conveyor Production program CAMBIUM Line laser for component referencing Control unit for disposal with control knobs Movable control panel on castors Blow-off device chips Pressure booster for ROBOT Timber flow direction from right to left (mirror machine) Automatic feeding system with buffer function – AQF 7 strings Extension of automatic conveyor for timber length 16 m Soft start for automatic feeding 5-axis sawing/slotting/marking unit Horizontal drilling unit 2.2 KW Slot tool interchangeable Extension of the conveyor roller conveyor for 13 m of timber length L ...

This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine.

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12