hauser 공작 기계 용 액세서리 사용 판매를 위해

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

Code 9602 DESCRIPTION Vertical JIG Grinder Make HAUSER Modell 3 SMO Serial No. 257 Machine No. 1519-2564 Table surface 600 x 320 mm Table movement longitude (X) 400 mm Table movement cross (Y) 250 mm Max. grinding diameter Ø 190 mm Column-Spindle 300 mm Max. height under spindle 500 mm Vertical movement spindle 90 mm Vertical movement grindinghead 500 mm Max. speeds grindingspindle up to 80.000 omw./min Weight 2000 kg Total power 6,6 kW – 380 Volts Accessories Grinding spindles, etc. Condition Machine is in good condition

amplification -fold: ? diameter: 380 mm workpiece height max.: 200 mm voltage: 230 V weight of the machine ca.: 245 kg dimensions of the machine ca.: 0,80 x 1,20 x 2,00 m - Serial-No.: 1740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland

x-travel: 400 mm y-travel: 250 mm workpiece height: 400 mm total power requirement: - kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 x 3 x 2 m No. 0444 Jig grinder HAUSER 3 SM Working area: 400 x 250 x 400 2-axis digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8153 Type: OP3 Producer: Hauser Generated: Parameters: Work table length: 595 mm Work table width: 320 mm Maximum spindle speed: 3000 1/min X-axis travel: 400 mm Y-axis travel: 250 mm Travel Z axis: 400 mm Spindle diameter: 130 mm Machine height: 1800 mm Machine length: 1350 mm Machine width: 1300 mm Machine weight: 1500 kg Equipment: DRO

amplification -fold: 100 diameter: 560 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 350 t dimensions of the machine ca.: 650 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 250 mm workpiece height: mm Control: CNC 314 ELESTA total power requirement: 15 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distanc ...

x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...

table length: 600 mm table width: 380 mm control: FANUC 16i-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 450 mm workpiece height: 585 mm Control: ADCOS CNC 400 total power requirement: 15 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Dista ...

spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

projection area: 510x350 mm table-size: 300x170 mm longitudinal travel: 200 mm cross travel: 50 mm vertical movement: 150 mm amplification -fold: 10/20/50/100 voltage: 220 V dimensions of the machine ca.: 850x110x1800 mm weight of the machine ca.: 310 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rectifieuse par coordonnées CNC HAUSER S40-400 CARACTÉRISTIQUES TECHNIQUES: Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] INFORMATIONS COMPLÉMENTAIRES : x1 pack H ...

Rectifieuse par coordonnées CNC HAUSER S40 400 CARACTÉRISTIQUES TECHNIQUES : Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Csbn Ua Hjwu Dwpe Rwjrd Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] ÉQUIPEMENTS INCLU ...

A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.

table length: 600 mm table width: 380 mm control: FANUC 0-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 380 mm control: FANUC 16-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jig grinding machine HAUSER S3-111

spindle diameter: 85 mm x-travel: 400 mm y-travel: 250 mm z-travel: 140 mm w-axis: 450 mm table surface area: 600 x 380 mm table load: 300 kg speeds: 30 - 2500 U/min adjustment speed: 0,02 - 0,08 mm/min tool taper: SK 30 Control: Elesta CNC 211 total power requirement: 9,2 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2750 x 1700 x 2700 mm - CNC Control Elesta 211 - with misc. tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hauser Model: S3-DR Type: Jig grinder / coordinate grinding machine Find more here - / Contact us at -

Coordinate grinding machine Hauser 3 SM BJ 1996 Surface Grinding Machine Okamoto BJ 1996 Cylindrical Grinding Machine White W11 BJ 2009

x-travel:400 mm y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° grinding wheel stroke - vertical:110 mm stroke speeds:0 - 6 m/min grinding spindle speed:bis 50000 U/min peripheral speed:max. 35 m/sec capacity:ca. 7 kVA power capacity:6 kW weight of the machine ca.:2 t dimensions of the machine ca.:3 x 3 x 3 m rotary table d = 300 mm frequency changer Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

number: 29 Positionen : 16 mm condition: neu weight: 11 kg Set 1 29 pieces, 16mm system, consisting of: Clamps: 4 x 160610 Bolt: 12 x 160511 Stop: 4 x 160420.N Angle: 4 x 160108.N Angle: 4 x 160110.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 57 Positionen weight: 98 kg condition: neu : 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Protection level: 9 - 13 M Power supply: 2 x CR2032 3V weight: 460 Gramm dimensions: 250 x 270 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flanges and Divereses

2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm

For sale comes: 1 used clamping/boring table Manufacturer: Skoda Type: E20OB22875 YEAR: 1989 Dimensions 2,000 x 2,000 mm Part weight: up to 25t electr. adjustable Mass: 10t

Large stock of punching material (dies/stamps), spare parts

Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner

YEAR: 2018

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

number: 65 Positionen : 28 mm condition: neu weight: 49 kg Basic-Set 3 65 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

9 drawers Weight: 293 kg Dimensions LxWxH: 720x725x1000mm Included content: Listing see photo

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO

number: 37 Positionen : 28 mm condition: neu weight: 35 kg Basic set 2 49 pieces, 28mm system, consisting of: Forceps: 8 x 280604 Bolt: 12 x 280511 Stop: 8 x 280420.N Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

amount: 39 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

amount: 9 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

amount: 63 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

amount: 13 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

amount: 26 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal plan and boring head ISO - 50 recording

amount: 107 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell 9 used machine feet with rubber foot Thread M20 Diameter 200mm Good condition Shipping on request All prices are subject to 19% VAT

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

New jaws for bison lathe chucks, and face plates

Revolving Center MK - 5 with changeble points

weight: . kg warranty: . Mon Dimensions (HxWxD): . mm temperature: -50.0 to 1600 °C The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conveying height: 2,5 Meter coolant capacity: 8,0 l/min 0: 11,0 ltr. motor: 400 Volt range L-W-H: 370 x 245 x 170 mm Furnishing: - with plastic container (10 liters) and flexible hose - 230 V connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Clamping table 600 x 600 mm

Counting scale Fabr. TOLEDO Type 4652 Specifications: Kns Ujikbg Herhyxksb Maximum load 20 kg Counting function 1:9 / 1:99 External dimensions approx. 650 x 350 x 600 mm

gebr. Copying device Fabr. Copymat, Type 1301A2

number: 10 Positionen weight: 30 kg condition: neu : 28 mm 5 screw clamps Thrust length 155 mm Length 300 mm Condition: new Hole diameter 28 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cover Protective Cover for FP3 CNC - Splash guard booth for Deckel FP3 milling machines - Distance fastening screws: 910 mm - Dimensions WxHxD: 1270 x 1300 x 950 mm - Weight: approx. 80 kg

number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION! Tools are designed for 25mm thick tabletops. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

WKZ spindle SK40 Used

Details: Year of construction 2021 The Haimer Power Clamp Economic Plus NG is a high-performance shrink device that is known on the market for its high reliability and precision. Its low power consumption and robust construction make it an ideal choice for any workshop. Technical data: Power consumption: 1.5 kW Shrink range: 3 - 32 mm Dimensions (L x W x H): 600 x 800 x 1200 mm

number: 93 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 102 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 80 Positionen weight: 150 kg condition: neu : 28 mm dimensions: 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic swivel table as shown in the pictures. Further information on request