falken 판금 가공 사용 판매를 위해

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6.5 mm pre-bending: 4.5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20,0 mm total power requirement: 2.2 + 1.5 kW weight of the machine ca.: 2370 kg. range L-W-H: 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use () Special price on request Equipment: - electro-hydraulic 4-roller round bending machine with driven top roller + bottom roller stable welded construction - Area of application: light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller  ...

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 5.5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on t ...

plate thickness: 2,0 mm tube diameter: 60,0 mm motor: 400 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST Shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm roll speed: 16.0 + 32.0 U/min engine output: 0.75 kW weight: 135 kg range L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm ST shaft length: 250 mm roll diameter: 96.0 mm throat: 160 mm roll speed: 6.0 + 13.0 U/min. total power requirement: 1.5 kW weight: 350 kg range L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm total power requirement: manuell kW weight of the machine ca.: 50.0 kg dimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal  ...

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional  ...

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu wall strength: 2.0 mm bar material - diameter: 30.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: 2.0 mm throat: 700 / 280 mm round blank diameter max.: 1000 mm round blank diameter min.: 120 mm speed: 7.0 m/min total power requirement: 1.10 kW weight of the machine ca.: 360 kg range L-W-H: 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch including emergency stop button The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 1870 kg. range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 ...

sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The  ...

: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50.0 mm band length: 940 mm band speed: 3.0 - 22 m/min turning speeds: 1450 U/min tube diameter: 16.0 - 114 mm radius: 180 ° total power requirement: 4.75 kW weight of the machine ca.: 265 kg range L-W-H: 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...

pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side -  ...

pressure: 60.0 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 4.0 mm/sec return speed: 10.0 mm/sec engine output: 4.0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the s ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand  ...

pressure: 80.0 t stroke: 285 mm flat steel: 300 x 25 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 750 x 1425 mm total power requirement: 10.0 kW motor: 400 Volt 50 Hz oil volume: 120 l weight: 1700 kg range L-W-H: 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) Bending punch .. degree: 60° / bending radius: 5.0 mm Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions The data ...

thread dia.: bis M 24 turning speeds: max. 280 U/min thread: M5 - M24 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3.0 kW weight - pallet system: 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can  ...

thread dia.: bis M 36 turning speeds: max. 150 U/min thread: M5 - M36 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 4.0 kW weight - pallet system: 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping  ...

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information.

This STAR SR-20 R II Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 18i-TB control unit and has 7 axis. The machine has a spindle speed of 500-10000 rpm.

This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, its designed for efficient operation. Contact us for more information about this machine.

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.

This 9-axis TSUGAMI TMB 2E swiss type turning machine was manufactured in 2012. It features a main and counter spindle both with speeds up to 6,000 rpm and 11 kW power. The machine includes a 16-position turret and a milling spindle that reaches 10,000 rpm. It supports rapid traverse rates up to 50 m/min on X and Y axes, and 36 m/min on Z-axis. Consider the opportunity to buy this TSUGAMI TMB 2E swiss type turning machine. Contact us for more information.

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.

This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information.

This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning.

This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details.

This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine.

This 3-axis Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine.

This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, its ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine.

This 6-axis Citizen C32 VIII was manufactured in 2005. Ideal for precision swiss type turning, this machine offers robust functionality and reliable performance. Consider the opportunity to buy this Citizen C32 VIII swiss type turning machine. Contact us for more information.

This 6-axis Miyano BX-26S was manufactured in 2010, featuring a maximum blank diameter of Ø26 mm and a maximum working length of 330 mm. It includes a dual-spindle setup with rotation speeds up to 8000 rpm and a linear turret with 18 total tools. The machine is equipped with a FANUC 18i-TB control system, supporting 6 controlled axes and 4-axis simultaneous interpolation. If you are looking to get high-quality turning capabilities consider the Miyano BX-26S machine we have for sale. Contact us for more information.

This 3-axis Star SR 20 R III was manufactured in 1996. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 RPM, and a rapid feed rate of 35 m/min. Ideal for precision turning, it also includes six fixed turning tool stations and five radial driven tool stations. If you are looking to get high-quality turning capabilities, consider the Star SR 20 R III machine we have for sale. Contact us for more information.

This Star SR 20 J Type C was manufactured in 2011. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 rpm, and a spindle power of 2.2 kW. The machine includes six fixed turning tool positions and five radial motorized tools. Ideal for precision Swiss-type turning, it has a compact footprint of 2.20 × 1.20 m. Contact us for more information about this machine.

This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine.

This TORNOS DECO 2000/20 was manufactured in 1998. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can handle up to 21 fixed and 15 rotating tools. It includes an IEMCA loader and a conveyor system, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 2000/20 Swiss type turning machine. Contact us for more information about this machine.

This 4-axis Citizen K16 VIP swiss type turning machine was manufactured in 2005. It features a max machining diameter of 16 mm, with spindle speeds up to 15,000 rpm on the main spindle and 10,000 rpm on the sub-spindle. Ideal for precision work, it supports a variety of tooling options. A great opportunity to buy this Citizen K16 VIP swiss type turning machine. For more information about this swiss type turning machine, please reach out to us.

This 6-axis TSUGAMI HS32 swiss type turning machine was manufactured in 2011. It features a maximum bar capacity of 32 mm and is equipped with a Fanuc 32i-B CNC control system. The main and sub-spindle speeds reach up to 8,000 rpm, with live tool speed up to 5,000 rpm. Consider the opportunity to buy this TSUGAMI HS32 swiss type turning machine. Contact us for more information about this machine.

This 3-axis Star SR-20J N was manufactured in 2019. Its a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information.

This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information.

Swiss type turning machine manufactured in 2000. This Star SR 20 R was designed for precision turning with a maximum turning diameter of 20 mm and a spindle speed of 8,000 rpm. It features 6 fixed turning tool stations and 4 radial motorized tool stations, providing versatility for various applications. Consider the opportunity to buy this Star SR 20 R swiss type turning machine. Contact us for further details.

This 7-axis KMT Speedmaster 104260-H was manufactured in 2001. It features a spindle speed of 8,000 rpm, chuck size of 20 mm, and bar capacity of 20 mm. The machine includes two turrets, each holding 8 tools, and is compatible with steel and aluminum. Consider the opportunity to buy this KMT Speedmaster 104260-H swiss type turning machine. Contact us for more information.

This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.

This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a HYBRIDE 10+5 drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine.

This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine.

This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details.

Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.

Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details.

This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details.

This 7-axis STAR MICRONICS SR-32JII-typeA was manufactured in 2017. It features a bar capacity of Ø32 mm and includes a main spindle and sub-spindle with C axis. The machine is equipped with a synchronized guide bushing and a gang tool plate with 6 positions. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR-32JII-typeA swiss type turning machine we have for sale. Contact us for further details.

This 7-axis Citizen Cincom A320-VII mod. A20-3F7 was manufactured in 2019. It features a maximum workable diameter of 20 mm, with an option for 25 mm, and a maximum workable length of 200 mm. The machine is equipped with a Fanuc 32i CNC control and includes a bar feeder, high-pressure coolant system, and a chiller. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom A320-VII machine we have for sale. Contact us for further details.

This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details.