130,790 재판매에 사용 된 기계,하지만 그들을 찾는 방법? 기계 검색
파는 사람: Szczep-pol s.c.
Key data: 800 kN
Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...
파는 사람: Szczep-pol s.c.
Key data: 1100 kN
Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...
파는 사람: Szczep-pol s.c.
Key data: 1400 kN
Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 5 Control with hot run ...
파는 사람: Szczep-pol s.c.
Key data: 1400 kN
Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal M ...
파는 사람: Szczep-pol s.c.
Key data: 1600 kN
Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimeta ...
파는 사람: Szczep-pol s.c.
Key data: 1800 kN
Engel Victory 200H/60W/180 combi / Production line with the Engel Viper 20 robot Year of Make: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Spar spacing: 0x0 mm Size of the clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced Injection Units - Bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter ...
파는 사람: Szczep-pol s.c.
Key data: 2200 kN
Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 480 g Spray pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 38,188 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant to ...
파는 사람: Szczep-pol s.c.
Key data: 2600 kN
Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...
파는 사람: Szczep-pol s.c.
Key data: 3000 kN
Engel Victory 1050/300 Tech Ecodrive with the Wittmann W832 PRO robot / Hybrid machine / Operating hours: approx. 25,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 540 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 25,000 in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 1 Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional ...
파는 사람: TADplast
Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes
파는 사람: TADplast
Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes
파는 사람: MASZYNERIA SP. Z O.O.
ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...
파는 사람: MASZYNERIA SP. Z O.O.
ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...
파는 사람: PLASTDECOR
Key data: 500 , 30
Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3
파는 사람: Lovric Maschinenhandel e.U.
Key data: 4200 kN
Machine in production !1
파는 사람: Maschinenhandel Borowski GmbH
Key data: 700 kN, 35 mm
used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English ...
파는 사람: USTA - Graphische Maschinen & Maschinenhandel
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
파는 사람: USTA - Graphische Maschinen & Maschinenhandel
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
파는 사람: USTA - Graphische Maschinen & Maschinenhandel
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
파는 사람: USTA - Graphische Maschinen & Maschinenhandel
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
파는 사람: Vanto Machines
Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm
파는 사람: Vanto Machines
Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg
파는 사람: Vanto Machines
SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm
파는 사람: Vanto Machines
Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm
파는 사람: Vanto Machines
SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg
파는 사람: Vanto Machines
double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg
파는 사람: Vanto Machines
Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Clamping force: 600 kN - Mould height max: 190 mm - Platen size (h x v): 910 x 400 mm - Control: CC220
파는 사람: Lovric Maschinenhandel e.U.
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
파는 사람: Complast GmbH
Key data: 450 mm, 63 , 25
Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only
파는 사람: Maschinenhandel Borowski GmbH
Key data: 280 kN, 30 mm
Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...
파는 사람: Innovac GmbH
A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible.
Key data: 2500 , 60
ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot
Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Overall platen dimensions : 740 x 470 mm Mold thickness: mini: 300 mm Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt
Key data: 1100 , 40
Machine de moulage par injection ENGEL VC330 -110T Référence : VC 330 /110 Force de fermeture : 110 T Année de fabrication : 2004 Nombre d'heures de travail : 84000 heures Diamètre de la vis : 40 mm Volume injectable maximum : 251 cm3 Epaisseur du moule : mini : 300 mm Poids : 7300 kg Dimensions : 4,36m x 1,48m x 2,04m 4,36 m x 1,48 m x 2,04 m
파는 사람: Europnet IMM
Key data: 2000 kN, 562 g/PS, 55 mm
Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold
파는 사람: MASZYNERIA SP. Z O.O.
ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...
Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m
Key data: 5500 , 80
Presse à injecter ENGEL 550 T Type ES1800 Année : 1998 E parfait état de fonctionnement
Key data: 3000 , 702 , 60
Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg
Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm
Key data: 1500 , 220 , 40
Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg
Key data: 900 , 183 , 40
Presse à injecter ENGEL 90T type ES 330/90 HL Année de fabrication : 1995 En bon état de fonctionnement Force de fermeture : 900 KN / 90 T Diamètre vis : 40 mm Volume injectable : 201 cm3 Poids de l'injection en PS : 183 gr Pression d’injection : 1300 bars Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 500 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 710 x 420 mm Dimensions : 4,22 x 1,42 x 2,00 m Poids : 5 900 kg
파는 사람: SWISSBID IBS MACHINES AG
Key data: 2000 kN, 352 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
파는 사람: SWISSBID IBS MACHINES AG
Key data: 2000 kN, 216 g/PS, 40 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
파는 사람: SWISSBID IBS MACHINES AG
Key data: 2000 kN, 216 g/PS, 40 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
파는 사람: GINDUMAC GmbH
This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.
파는 사람: GINDUMAC GmbH
This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.
파는 사람: GINDUMAC GmbH
This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information.
Key data: 11000 , 1950 , 150
Presse à injecter ENGEL 1100 T Année 1999 Nombre d’heures : 85 000 h Force de fermeture : 1100 T - 11 000 KN Diamètre vis : 150 mm Volume injectable : 10950 cm3 Pression d’injection : 1330 bars Diamètre des colonnes : 230 mm Force d’éjection : 215 N Dimensions des plateaux : 1400 mm x 1150 mm Course d’ouverture : 1800 mm Poids : 77 Tonnes
파는 사람: GINDUMAC GmbH
This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.
파는 사람: GINDUMAC GmbH
This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.
파는 사람: GINDUMAC GmbH
This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 Ã 1,923 Ã 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.
파는 사람: GINDUMAC GmbH
This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 Ã 2,360 Ã 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.
파는 사람: GINDUMAC GmbH
This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine.
파는 사람: GINDUMAC GmbH
This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.
파는 사람: Szczep-pol s.c.
Key data: 1000 kN
Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started b ...
파는 사람: Szczep-pol s.c.
Key data: 1800 kN
Engel e-max 440/180 / Electric machine Year of Make: 2009 Injection unit: Screw diameter: 40 mm Injection weight: approx. 199 g Spray pressure: 1950 bar Dosing volume: 220 ccm Clamping unit: Clamping force: 180 t Tiebar spacing: 520x520 mm Size of the clamping plates: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition, worked in clean production Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hardened injection unit - Bimetal Parallel movements Central lubrication Automatic tool height adjustment Kistler Sensor - Tool Pressure Control Original Tool Crane Dimensions: Weight: 7200 kg Length/Width/Height: 5.87x1.42x2.00 m All offered machines are started by our service technicians before they are sold ...
파는 사람: Szczep-pol s.c.
Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 50 mm Spraying weight: approx. 395 g Spray pressure: 2332 bar Dosing volume: 422 cc Clamping unit : Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant t ...
파는 사람: Szczep-pol s.c.
Engel Victory Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit : Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the ma ...
파는 사람: Szczep-pol s.c.
Key data: 2750 kN
Engel ES 1350/275 HL with the Engel ERC 53/1-E robot / machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 60 mm Injection weight: 547 g Spray pressure: 1834 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 275 t Spar spacing: 0x0 mm Size of the clamping plates: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less machine Hydraulic core pull x 3 Control with hot runners x 16 Hardened injection unit - Bimetal Machine has been regularly serviced by the authorized service Engel Dimensions: Weight: 20000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the tech ...
파는 사람: GINDUMAC GmbH
This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.
파는 사람: Szczep-pol s.c.
Engel e-Motion 740/280 T WP with the TecnoMatic robot / Electric machine Year of Make: 2016 Injection unit: Screw diameter: 50 mm Injection weight: approx. 360 g Spray pressure: 1900 bar Dosing volume: 393 ccm Clamping unit : Clamping force: 280 t Tiebar spacing: 780x780 mm Size of the clamping plates: 1100x1100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: Production line with the TecnoMatic robot Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 4 Control with hot runners x 64 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Parallel movements Aut ...
파는 사람: GINDUMAC GmbH
This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.
파는 사람: GINDUMAC GmbH
This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 Ã 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.
파는 사람: GINDUMAC GmbH
Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale â same configurations.
파는 사람: GINDUMAC GmbH
Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.
파는 사람: STVmachinery
Key data: 1200 kN, 186 g/PS, 35 mm
Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machiner ...
파는 사람: B&A MACHINERY
B&A REF: 9307 TON: 1100 SCREW DIAMETER: 105MM SHOT WEIGHT: 3075 STROKE VOLUME: 3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES: 1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT: 600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE: 1800MM MAX DAYLIGHT: 2400MM EJECTOR STROKE: 300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
파는 사람: GINDUMAC GmbH
Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.
파는 사람: GINDUMAC GmbH
Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.
Key data: 11000 kN
ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...
파는 사람: GINDUMAC GmbH
Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.
Key data: 11000 kN, 150 mm
Clamping force: 1100 T Year: 1999 Working hours: 86,200 h Screw diameter: 150 mm Column diameter: 230 mm Displacement: 10,955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 x 1400 mm Heating capacity: 113 kW (153.64 hp) Total weight: 77,000 kg Clamping Unit (L x L x H) : 5 x 3,5 x 2,6 m Weight : 53T Injection unit(L x L x H) : 5,5 x 2,7 x 2 m Weight : 24T
파는 사람:
Complete control CC 90 for ENGEL injection moulding machines
파는 사람: Lovric Maschinenhandel e.U.
machine in stock!
파는 사람: AUER
Engel injection moulding machine old
파는 사람: Euro Rubber Lines
Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.
파는 사람: PLAMA Engineering GmbH
PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET
파는 사람:
Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004
파는 사람:
Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550
파는 사람:
Hand Terminal KeTop Panel C 35 for ENGEL Robot Viper
파는 사람: MEB Maschinenhandel GmbH
clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
파는 사람: MEB Maschinenhandel GmbH
clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
파는 사람: PaGaPlast
Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface
파는 사람: PaGaPlast
Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface
파는 사람: Vanto Machines
- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN
파는 사람: MEB Maschinenhandel GmbH
clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
파는 사람: BASTA MACHINES s.r.o.
Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Type: Vertical Drive: Hydraulic
파는 사람: Lovric Maschinenhandel e.U.
Key data: 7000 kN, 40 mm
Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)
파는 사람: Lovric Maschinenhandel e.U.
Key data: 5000 kN
Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h
파는 사람: BASTA MACHINES s.r.o.
Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: Approximately 35 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm
파는 사람: BASTA MACHINES s.r.o.
Weight 52 kg Picker from IMM Engel Victory 80/50 Spex
파는 사람: BASTA MACHINES s.r.o.
Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Hours: 56000
파는 사람: Lovric Maschinenhandel e.U.
Key data: 4000 kN, 80 mm
Machine + Viper Robot 12
파는 사람: BASTA MACHINES s.r.o.
Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm
파는 사람: Andrew Isaacs Machinery International Ltd
Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual
파는 사람: Formplast GmbH
Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...
Injection moulding machine Engel e-motion 2440/380 T BJ 2008
Injection moulding machine Engel victory 200H/200V790 comb BJ 2018
최대 결과 수가 초과되었습니다.
검색을 구체화하십시오.
