baader 육류 및 생선 가공 기계 사용 판매를 위해

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

Baader soft separator Type 696 With load With dosing bunker

see picutre for hours Find more here - / Contact us at -

Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

SEPARATOR BAADER, TYPE: 696 Technical description: Machine number: 12 6533 0696 Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Power supply: 380 V, 3 Ph, 50 Hz, 3.7 A, 1.5 kW Dimensions: 1050 x 1000 x 1340 mm

SEPARATOR BAADER, TYPE: 694 Technical description: Power supply: 230-400V /50Hz / 1,5Kw Bandwidth: 200 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1140 x 950 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

SEPARATOR BAADER, TYPE: 699 WITH FEED ELEVTOR AND OUTLET CONVEYOR Technical description: - Separator hopper with breaker and helicoid Dimensions: 2100 x 1050 x 1400 mm - Elevator for bins up to 200 liters Lift height: 2500 mm Dimensions: 900 x 750 x 3500 mm - Separator Baader, type: 699 Serial number: 12-7157-699 Year: 1989 Power supply: 380 V, 50 Hz, 15.0 A, 8.0 kW Drum holes: ? 2 mm Dimensions: 1500 x 1450 x 1550 mm - Outlet conveyor with plastic band Bandwidth: 200 mm Lift height: 900 mm Dimensions: 1500 x 400 x 950 mm This machine uses the same principle as the BAADER 694 and 697 but with much higher throughput. It is a further development of the BAADER 695. The speed is infinitely variable up to twice the normal speed. The belt pressure is controlled by a hydraulic system. Pressure and speed indicators allow correct adjustment of the machine to different raw material. T ...

SEPARATOR BAADER, TYPE 694 Technical description: Power supply: 380-440 V/50-60 Hz Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1100 x 1000 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,

Height=1.65 m, Overall length= 1.4 m, Overall width= 1.1 m, Net weight= 270 kg,

Height=1.55 m, Overall length= 1.15 m, Overall width= 1.3 m, Net weight= 680 kg,

Height=3.25 m, Overall length= 1.68 m, Overall width= 3.7 m, Net weight= 2400 kg,

Cutter Manufacturer: Baader Stainless steel Capacity: 60 liters 6 knives

A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible.

Offered is an abdominal opener for poultry processing. Manufacturer: LINCO Food Systems (formerly Lindholst & Co A/S, now BAADER) / Tielemann Food Equipment BV, type 12 CW / 8 inch. Compatible bird sizes (live weight): standard broilers: 1.5-2.5kg, large broilers: 2.5-4.0kg, laying hens: 1.0-4.5kg, throughput: 6300 birds per hour (BPH), noise emission: below 80dB(A) at the workplace, machine dimensions (W/D/SM): 1380mm/1350mm/776mm, machine weight: approx. 550kg. Suitable for integration into industrial poultry slaughter and evisceration lines. Inspection possible by arrangement.

Used Baader fish fillet machine type 483. Year of manufacture 1993.

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Used transfer machine from Baader Linco. The device automatically transfers birds from the slaughter line to the evisceration line. Birds are released from the slaughter line by cutting off their legs with a built-in cutting unit and re-suspended at the ankle joint on the eviscerating line.

MAR VM8-DT closing machine for rubber bungs, 8 head, with automatic bung feeder with vibrating bowl, suitable for containers 10 to 80mm diameter and from 30 to 180mm high. Includes format parts for 20mm bungs. Output up to 400 per minute. Machine dimensions approx 2000 x 900mm, height approx 1700mm. Weight approx. 960kg. Electrics 220/380V 50Hz.

There are various new parts for King industrial head machine I-Rex for sale. new flange for drum King industrial head machine I-Rex: - Outer diameter: 310mm - Inner diameter: 40mm - Width: 25mm - Material aluminium new ripple shaft for drum King industrial head machine I-Rex: - Length: 910mm - Outer diameter: 59mm - One side bearing seat: 20mm outer diameter - Steel tinned Side plate dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex: - teflonized Side plate dough guide for pre-portioners for type TRÖ 240 for drum King industrial head machine I-Rex Plastic inner side plate Dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Aluminum side panel for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Gear set Z 24 for pre-portioners for type TRÖ 240 for  ...

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

BUHLER Polishing / pearling machine DSRH 15 1V 5S for seeds, groats LIKE NEW For rice, barley, wheat, spelt... Bargain..

Various conveyor belts, different lengths and widths, conveying screws, vibration troughs, washing systems,, NIKO trough for flushing, ABL washing system with conveyer belt,, PEACE submachine for apples,, SOLIA G450 large kitchen slicer,, SOEHNLE belt conveyer scale., Destacking for GN shells,, GMS ILPRA - sieve seal for gastro basins,, GÜNTHER Tauchbad,, BAKON glaze application,, Special filling - system for mushrooms,, LOMA metal detector,, NILFISK High-pressure station,, Rotary drum screen for wastewater treatment, WINKLER CORSAR drum dryer,, MAJA ice cream machine,, DIERKS spiral nut, DIOSNA planetary mixer,, NWU Water Cooler,, KAESER compressor,

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml

This machine automatically places a cloth or paper doily on the glass and usually secures it with a rubber band or string., Capacity: approx. 30 glasses / min,, The machine requires compressed air, oil and water free., power: approx. 30 glasses / min

Used Tetra Pak TBA-8 SQ 1000 ml filling machineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic) (3.862 working hours). Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 Lid (for Stream Cap closures) ( 7.709 working hours).Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Sh ...