apv 음료 기계 사용 판매를 위해

very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.

Beer pump / water uwemetzler@dingslebener

APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...

APV Homogenizer LAB 100 Ball valves Technical data see also pictures: Type: 100-6 TBS Capacity: 100 LTR. / h Engine: 2.2 KW

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,

Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.

Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz

WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS

Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control

HOMOGENISER Manufacture : APV MANTON GAULIN Model : K3 Capacity : 1200 L/h Bar : 200 bar Stages : 2 Manual Book : Included

Manufacturer: APV Gaulin Type: MC 120-2.5 TPS Serial No.: 95 l 34612 Year of Make: 1995 Conversion to NanoValve for more efficient homogenization Capacity: 15,000 - 19,000 l/h Operating pressure: 250 bar Condition: good, fully functional

APV Screw Compressor 3 Screw compressors Control Panel, Fridge watch 2100 system DX system Last run on 404a Last used to run a Spiral Freezer 33 Kw each, Total = 99Kw Max Model: HS2116 Built 1994 Complete with Searle Condensor (4 fan) Model: MDR 110-12 Serial: 961246 Physical dims: 5.1m x 1.16m x 0.7m (h)

Butter Bulk Packer, Model : FMV, Capacity : 5-25 kg, Productivity: 3000 kg per hour max, Tank Silo with screw augers, Twin Screw Augers for butter, Inlet of Product : Window opening or Direct connection from source ( CBM, Butter pump, Silos), Outlet : Butter Bulk Packing in Bag in Box with push off system, Guards : Safety Guards on Filling, Roller Conveyor on to Check Weighing system with roller conveyor, Box Tape Closing Machine, Metal Detector Iq 2 Loma, Check Weighing Device, Capacity: 5-25 kg, Metal Detector: Iq 2 Loma , Tape Box Closer: SIATE , Model: FMV, Cutting Device : Pasilac with Safety Guard , Check Weighing System: Included , Ink Jet Coder: Not Included , Guards: Safety Guards on Filling

Plate apparatus Manufacturer : APV Type: K 55 Capacity: 8,000 litres/hour Technical specifications : 6 Departments 1x steam, 1x hot water, 2x product vs. product, 1x cold water, 1x ice water Capacity 8,000 litres/hour Clip seals 423 plates total Material Plates AISI 316 (V4A), thickness 0.8 mm 1 box with replacement seals is still included. good condition

MANUFACTURER: APV GAULIN MC 45 MILK HOMOGENISER TYPE: 5283 MC45-2,5 TPS CAPACITY: 20.000 l/h PRESSURE: 175 BAR 2 STAGES PRESSURE CONTROL: HYDROULIC CONTROL NUMBER OF PISTONS: 3 MOTOR 90 KW

This - APV Concentrate dosing line for UF. Is for dosing of Various products and has multiple dosing pumps with the complying tank for each dosing system, This is all controlled through the control panel with accuracy., Number Dosing systems: 6, Number Tanks: 5 , Steam Heating: With Regulating Valve , PHE: Heating Plate heat exchanger , Product Pumos: 2 , Situated: On stainless steel skid for easy transport , Connections: Exchange plate , CIP: Yes , Electrics: 3 ~ / 400 Vac , Available: Immediately

APV high pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 liters/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

Stock# U2473-1 Used system for inline mixing powder with liquid. System consist of: - conical stainless steel AISI 321 feeding hopper with total volume about 4000 l, and working volume about 3800 l. Tank has top side wall feeding inlet with dimensions L 700 mm x H 350 mm, equipped with stainless steel lid closed on clamps. Tank has on conical side wall mounted vibrating device. Includes working platform with stairs. - inline liquid-powder mixer. Powder inlet connection 3". Mixing chamber has internal diameter 180 mm. Rotor is driven directly by el. motor 6.8 kW, 1455 rpm, 400/690 V, 50 Hz, in Ex design (Ex-IIC Exe IIC T3G6). Mounted on mobile stainless steel frame. - Stainless steel bag type dust filter by WAM in Ex design - Connection stainless steel pipes and valves.

REF-2705 APV GAULIN 15-3.0 B HOMOGENIZER 1000 LITRES/HOUR Manufacturer: APV Brand: Gaulin Model: 15-3.0 B Serial no.: 1-02.452 Year: 2002 Single-stage homogenizer for liquids Overall dimensions (mm): 1,400 x 900 x 1,600 (LxWxH) Capacity: 1,000 l/h Max. temperature: 50 °C Homogenization pressure: 200 bar Electric motor: 11 kW/3x380 V/50 Hz Inlet/outlet connections: 50/65 mm Made of stainless steel, including some AISI 316 components N.B.: This homogenizer can be purchased separately or as part of an APV complete pasteurization system for fish broth also advertised on this site.

Pasteuriser and Operating Panel Manufactured by APV Consisting of APV heat exchanger, holding tubes, pump and control panel with chart disc recording Output 200 BBL/320HL Complete with: 30BBL/49HL sterile beer tank Side entry manway Insulated and clad in stainless steel 2BBL/300 litre sterilising tank This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Centrifugal pump, motor 1,1kw, Impeller size 130mm, max 18bar, 33m3/h 2800rpm, inlet/outlet 51/51mm

Centrifugal pump, motor 1,5kw, impeller size 160mm, max 18bar 55m3/h, 2800rpm, inlet/outlet 65/51mm

Centrifugal pump, inlet/outlet 51/51mm, motor ABB Motors 4kw 1420 rpm 20m3/h

This Sterile Milk Tank has a Capacity of 16,700 Litres, it does not include the valve cluster and PLC program. There are a few valves available with the tank but these would need to be reconnected to a valve cluster program. This tank was connected to a central control room . The condition is good and there has not been any damages . Aseptic tanks are used for the process of Milk, Juice and other liquids required aseptic pasteurisation prior to the filling machines., The APV Aseptic Tank is a type of equipment designed for the storage and processing of liquids, particularly in industries such as food and beverage, pharmaceuticals, and biotechnology. Here are some key features of the APV Aseptic Tank:, - Sterile Environment: The APV aseptic tank maintains an environment that is free from contaminants, crucial for the integrity and safety of the stored product., - Construction Material: Ty ...

This APV Gaulin 79 MC 2-5TBSX aseptic homogeniser is a 3-cylinder machine which is designed for 300 liter per hour with a maximum pressure of 340 bar. The homogensier is equipped with 2-stage with ball valve cylinder, manual controlled. Manometers. Overpressure valve. Motor: 5,5 kW - 380/420 V - 13,5 Amp - 50 Hz - 950 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 300 liter per hour, Stages: 2 Stages, Max. Pressure: 340 bar, Valve cylinder: Ball valves, Product: Milk, Piston diameter: 18 mm, Motor: 5,5 kW - 380/420 V - 13,5 Amp - 50 Hz - 950 rpm, Dimensions: 120 x 80 x 125 cm, Weight: 400 kg

Used APV Gaulin GmbH homogeniser, type 1057 MC 7-3 TPS. New 1994. Technical specifications: - Pressure 210 bar, - Weight 1650 kg, - Flow rate 4000 l/h, - Power 30 kW, - Max. temperature 85 degrees Celsius, - Dimensions: height 123 cm, width 89 cm, length 133 cm.

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...

This APV Gaulin 264 MC 15-8TBS homogeniser is a 3-cylinder machine which is designed for 1.000 liter per hour with a maximum pressure of 500 bar. The homogensier is equipped with 2-stages with ball valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer. Motor: 22 kW - 380 V - 44 Amp - 50 Hz - 1.465 rpm. Stainless steel cladded. Oil pumping system outside the machine., Type of Machine: Homogeniser, Capacity: 1.000 liter per hour, Stages: 2 Stages, Max. Pressure: 500 bar, Valve cylinder: Ball valves, Product: Dairy, Piston diameter: 51 mm, Motor: 22 kW - 380 V - 44 Amp - 50 Hz - 1.465 rpm, Dimensions: 180 x 110 x 180 cm, Weight: 2.115 kg

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV P ...

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV Puma), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ0321, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 641, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV Pum ...

This APV Gaulin 159 MC4-5TBS homogeniser is a 3-cylinder machine which is designed for 300 / 600 liter per hour with a maximum pressure of 250 bar. The homogensier is equipped with 1-stage with ball valve cylinder, manual controlled. Manometer. Overpressure valve. Motor: 7,5 kW - 380 V - 16 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded. Including simple free standing control panel., Type of Machine: Homogeniser, Capacity: 300 / 600 liter per hour, Stages: 1 Stage, Max. Pressure: 250 bar, Valve cylinder: Ball valves, Product: Cream / Cream cheese, Piston diameter: 24 mm, Motor: 7,5 kW - 380 V - 16 Amp - 50 Hz - 1.440 rpm, Dimensions: 120 x 80 x 165 cm, Weight: 800 kg

This APV Schröder / Gaulin MC18-2,5TPS homogeniser is a 3-cylinder machine which is designed for 10.000 liter per hour with a maximum pressure of 175 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometers. Pulsation demper. Motor: 63 kW - 380 V - 120 Amp - 50 Hz - 1.475 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 10.000 liter per hour, Stages: 2 stages with Micro-Gap valve, Max. Pressure: 175 bar, Valve cylinder: Poppet valves, Product: Milk, Piston diameter: 60 mm, Motor: 63 kW - ...

This APV Gaulin MC18-2,5TPS homogeniser is a 3-cylinder machine which is designed for 7.000 liter per hour with a maximum pressure of 150 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometers. Motor: 37 kW - 400 V - 70 Amp - 50 Hz - 1.475 rpm. Oil pumping system inside the machine. Stainless steel cladded., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 7.000 liter per hour, Stages: 2 stages with Micro-Gap valve, Max. Pressure: 150 bar, Valve cylinder: Poppet valves, Product: Milk, Piston diameter: 65 m ...

This APV Gaulin MC18-5TPS homogeniser is a 3-cylinder machine which is designed for maximum 5.500 liter per hour with a maximum pressure of 345 bar. This machine, based on the motor power and the piston diameter is set on 4.800 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages, hydraulich controlled. Piston diameter 45 mm. Manometer. Motor: 55 kW - 380 V - 99 Amp - 50 Hz - 1.470 rpm, forced cooling on the motor (for running at lower capacities). Oil pumping system inside the machine. Stainless steel cladded., Additional features:, No typeshield on the machine, so unknown serial number and year of manufacturing. Model and capacity based on piston diameter and motor power., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 4.800 liter per hour, Stages: 2 stages, Max. Pressure: 345 bar, Valve cylinder: Poppet ...

Homogenizer APV Rannie BLP 63.60 Manufacturer: APV Homogenisers AS Model: Rannie BLP 63.60 Machine Type: Homogenizer Serial number: 1.97.187 Year of Make: 1997 Max. pressure: 70 bar

This APV Gaulin 145 MC 4-8TPS homogeniser is a 3-cylinder machine which is designed for 550 liter per hour with a maximum pressure of 550 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer (max 400 bar). Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 550 liter per hour, Stages: 2 Stages, Max. Pressure: 550 bar, Valve cylinder: Puppet valves, Product: Food industry, Piston diameter: 20 mm, Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm, Dimensions: 100 x 70 x 145 cm, Weight: 800 kg

APV Gaulin G132T-3.6P high-pressure homogenizer – 15,000 l/h – 250 bar – very good condition Kebn Heytv Iisg Hd Nedk For sale is a high-performance high-pressure homogenizer from the manufacturer APV Gaulin, model G132T-3.6P, designed for industrial use in milk and beverage processing. The machine has been continuously serviced and is in good, fully functional condition. Ideally suited for applications such as milk, yoghurt drinks and similar products. Technical data: Manufacturer: APV Gaulin Type: G132T-3.6P Year of construction: 2000 Capacity: approx. 15,000 l/h Operating pressure: up to 250 bar Version: 2-stage Pistons: 3 Engine power: 137 kW Application: Milk / Yoghurt Drinks / Liquid Products Electric cabinet: available Condition: Machine is fully functional Regularly serviced during operation No known defects Ready to use immediate ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

This APV Gaulin 1056 MC 18-5TPSC aseptic homogeniser is a 3-cylinder machine which is designed for ± 4.500 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, both stages manual controlled. Manometer. Motor: 45 kW - 380 V - 98 Amp - 50 Hz - 1.465 rpm. Stainless steel cladded. Oil pumping system outside the machine., Type of Machine: Homogeniser, Capacity: 4.500 liter per hour, Stages: 2 Stages, Max. Pressure: 345 bar, Valve cylinder: Puppet valves, Product: Dairy, Piston diameter: 44 mm, Motor: 45 kW - 380 V - 98 Amp - 50 Hz - 1.465 rpm, Dimensions: 180 x 110 x 180 cm, Weight: 2.115 kg

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system, Additional title: cold degassing via CO2-Stripping, Capacity: 20000 l/h, Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar, Gross volume buffer tank: 7060 l ; overpressure up to 4 bar, Residual oxygen content appr.: 0,010 - 0,015 mg/l, Operation / Control: Simatic S5, Material: stai ...

Overview  This flash pasteurizer was manufactured in 2001 by German company Krones / APV. The unit was previously operated in a mineral water production facility in Germany. Following the replacement of the complete line, the machine was dismantled and sold individually. It is available immediately and currently in stock. The reason for sale is a line upgrade. Technical data Type: Flash pasteurizer (short-time heating system) Application: Alcohol-free beverages / mineral water Capacity: Guaranteed throughput up to 22,000 l/h Adjustable down to 10,000 l/h Process design: Plate heat exchanger with regeneration, heating, degassing and cooling sections Integrated degassing unit Buffer tank with internal circulation Electrical connection: 230 / 400 V, 3 Ph, 50 Hz Control voltage: 24 V DC Execution: Stainless steel construction CE-compliant according to EU machinery directives Control & instr ...

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

MAR VM8-DT closing machine for rubber bungs, 8 head, with automatic bung feeder with vibrating bowl, suitable for containers 10 to 80mm diameter and from 30 to 180mm high. Includes format parts for 20mm bungs. Output up to 400 per minute. Machine dimensions approx 2000 x 900mm, height approx 1700mm. Weight approx. 960kg. Electrics 220/380V 50Hz.

There are various new parts for King industrial head machine I-Rex for sale. new flange for drum King industrial head machine I-Rex: - Outer diameter: 310mm - Inner diameter: 40mm - Width: 25mm - Material aluminium new ripple shaft for drum King industrial head machine I-Rex: - Length: 910mm - Outer diameter: 59mm - One side bearing seat: 20mm outer diameter - Steel tinned Side plate dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex: - teflonized Side plate dough guide for pre-portioners for type TRÖ 240 for drum King industrial head machine I-Rex Plastic inner side plate Dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Aluminum side panel for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Gear set Z 24 for pre-portioners for type TRÖ 240 for  ...

BUHLER Polishing / pearling machine DSRH 15 1V 5S for seeds, groats LIKE NEW For rice, barley, wheat, spelt... Bargain..

Various conveyor belts, different lengths and widths, conveying screws, vibration troughs, washing systems,, NIKO trough for flushing, ABL washing system with conveyer belt,, PEACE submachine for apples,, SOLIA G450 large kitchen slicer,, SOEHNLE belt conveyer scale., Destacking for GN shells,, GMS ILPRA - sieve seal for gastro basins,, GÜNTHER Tauchbad,, BAKON glaze application,, Special filling - system for mushrooms,, LOMA metal detector,, NILFISK High-pressure station,, Rotary drum screen for wastewater treatment, WINKLER CORSAR drum dryer,, MAJA ice cream machine,, DIERKS spiral nut, DIOSNA planetary mixer,, NWU Water Cooler,, KAESER compressor,

This machine automatically places a cloth or paper doily on the glass and usually secures it with a rubber band or string., Capacity: approx. 30 glasses / min,, The machine requires compressed air, oil and water free., power: approx. 30 glasses / min

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml

Used Tetra Pak TBA-8 SQ 1000 ml filling machineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic) (3.862 working hours). Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 Lid (for Stream Cap closures) ( 7.709 working hours).Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Sh ...