yks 焊接设备 二手 出售

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 10400 € : 199.68 € : 20000 kg : 10000 to : 750 mm : 4500 mm : 300 mm : 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 020157 : prompt, Zwischenverkauf v : Türkei : 6320 € : 121.98 € : 1 : 250 kg : 150 mm : 150 mm : 360 ° : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.25 kW : 0.1 - 3 U/min : 30 s : 600 mm : M16x6 mm : 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: ...

: neu : 2025 : 020176 : prompt, Zwischenverkauf v : Türkei : 3700 € : 1 : 4 kg : 155 kg : 2 to : 100 mm : 900 mm : 300 mm : 70 mm With 0.55 kW motor drive Forward and reverse operation Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 16000 € : 307.2 € : 20000 kg : 10000 to : 900 mm : 4500 mm : 300 mm : 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 € : 96.69 € : 100 kg : 150 mm : 150 mm : 360 ° : 120 kgm : 230 / 50 V / Hz : 0.25 kW : 0.25 kW : 0.1 - 3 U/min : 30 s : 350 mm : M12x6 mm : 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - o ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 € : 149.19 € : 500 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.37 kW : 0.1 - 3 U/min : 45 s : 800 mm : M20X6 mm : 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 13200 € : 253.44 € : 10000 kg : 5000 to : 900 mm : 4500 mm : 300 mm : 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 € : 468.48 € : 3000 kg : 150 mm : 150 mm : 360 ° : 135 kgm : 400 / 50 V / Hz : 1.1 kW : 1.1 kW : 1200 mm : 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 020156 : prompt, Zwischenverkauf v : Türkei : 6720 € : 129.7 € : 1 : 250 kg : 205 kg : 150 mm : 150 mm : 360 ° : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.25 kW : 0.1 - 3 U/min : 30 s : 600 mm : M16x6 mm : 550 mm : 1000 mm : 700 mm : 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welde ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 8700 € : 167.91 € : 10000 kg : 5000 to : 750 mm : 4500 mm : 300 mm : 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

SWELD welding machine - Mains connection: 415 V (50/60 Hz) 3 Ph. - Transformer fuse: 30 A - Duty cycle: 375 A 40 % 300 A 60 % 230 A 100 % - Protection class: IP 23 S Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

One used complete mesh welding line from SCHLATTER. This MG305 works from line wire off spools and pre straightend cross wires. This machine is very complete, from line wire pay offs to the automatic turning and stacking unit for meshes up to 8.000mm This MG305 can weld up to 10mm and do have 100 and 150mm equipment. For the production of the cross wires is a good VITARI straightening and cutting machine availible For this line a big spare part package is availible as well and a lot equipment as: Spools ( 3 ton ) Butt welder Mesh Package Lifter Automatic Mesh Package Tyning System Compressor Main Transformer etc..

offer 22629 TIG welding machine - air-cooled equal-alternating current system, mobile - for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - Welding current TIG infinitely adjustable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current indicator - Frequency control of the arc - HF ignition - Pulse device - Hose package 5 m -Reducer - Ground cable - Carriage - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

MG 900 Schlatter Width: 1250 mm Length: 2000 mm Diameter 2-8 mm Pull in Pull out Cross Wire Magazine Stacker

Welding apparatus type G 400 1 Manufacturer: Messer Griesheim

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

Offer 24367 Specifications: - Orbital welding machine AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circumferential seam welding device AXXAIR CC 220 with motorized concentricity - Raw cutting machine AXXAIR CC 80 -Trolley - Table height 830 mm - Connection 220 V - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

• Year 2022 (like new) • Offering up to 800 amps of gouging power with 50 % dutycycle, • the KempGouge ARC 800 is a heavy duty power source package that is designed for all types of carbon arc gouging. • KempGouge can be used with the majority of metals, such as steel, stainless steel, cast iron, nickel, copper, magnesium, andaluminum. • KempGouge lets you open roots or faulty welds and cracks, prepare welding grooves, cut metals, make holes and cleancasts, and remove excess metal. • The characteristics curve controlling the KempGouge’s operating parameters has been designed specifically for carbon arc gouging, so its gouging properties are optimal. • The noise levels of KempGouge have also been kept very low. • FAST AND EFFECTIVE Way to remove defects, backgouge the root, cut metal and pierce holes • EASY WAY To move the equipment and adjust t ...

Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse

Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment

Used welding equipment As seen in the pictures, technical data See pictures. If you have any further questions, please Price is per piece

Key data: 220 A, 230 V

Manufacturer: Fronius Model: MagicWave 2200 Job G/F Type: TIG Welding Machine (AC/DC) Welding current range: 3–220 A Power supply: 230 V, 1~ Process: TIG/MMA Condition: used Location: Bremen

Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm

Offer 26610 Technical data : - All measurements are estimated - Working range / adjustment range horizontally approx. 3 m - Working range / adjustment range vertically approx. 3 m - Mast height approx. 5 m - Lift drive infinitely variable - Welding feed infinitely variable - Control panel with control + control cabinet + wiring - Welding source STARMATIC 1003 DC up to 1000 A - Welding mast STEITZ - UP – powder – boiler - Mot. Rail running gear for floor-mounted rails - Running rails floor-mounted approx. 25 - 30 m - Connection 400 V

Industrial Metalworking & Welding Equipment Inventory Overview: Offering a collection of heavy-duty vintage and modern industrial machinery. This inventory includes high-capacity press brakes, plate rollers, and specialized Oerlikon welding systems. Bending & Rolling Machines - Plate Bending Roller (35/3150): Wilhelmsburger (1959) - Plate Bending Roller (RMA 2500/8): Chr. Häusler (1963) - Heavy-Duty Press Brake (650t): Scharinghaus (1957) - Heavy-Duty Press Brake (500t K 1/3 M): Scharinghaus (1956) - Heavy-Duty Press Brake (200t): Scharinghaus (1955) - Profile Bending Machine (BO232 K): Hercules (1960) - Ring Bending Machine: Auersbach (Year N/A) - Swivel Bending / Folding Machine: Manufacturer N/A - Small Plate Roller: Manufacturer N/A Cutting, Pressing & Machining - Guillotine Shear (ScTP 25/3150): VEB Pressen- u. Scheren ERFURT (1966) - Small Guillotine Shear: Weingarten (Year N ...

400 V, with constant temperature control, with adjustable air volume and digital display for the air volume. For 40mm overlap with Cekom plug, with tension indicator, incl. wooden box. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 40 mm Weight: 57 kg Colour: green Dimensions: 740 x 480 x 470 mm Machine number: 1501221760