wp 面包和甜点烘焙设备 二手 出售

pressure: 25 t stroke: mm table surface area: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: WP Capacity: 25 T Distance between columns: 760 mm Distance between cylinder and table: 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible.

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M16 -Quantity: 1 piece available -Dimensions: Ø 150 x 40 mm -Weight: 1.1 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M10 -Quantity: 1 piece available -Dimensions: Ø 150 x 43 mm -Weight: 1.1 kg/piece

Manufacturer : Alexanderwerk Model : WP150x120V Condition : Used The Alexanderwerk WP150x120V is a roller compactor used primarily for dry compaction and granulation processes, often in industries like pharmaceuticals and chemicals. Find more here - / Contact us at -

Make: Carrier Type: QUIETIS WPH31A 400/3/50 Refrigerant: R404A Built: 2013 Price on request

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

Binding machine Renz WP300 Art.Nr. PS6005

Hydraulic workshop press PREMIUM WPMEH 30/2 Demonstration article Condition: slight signs of wear --> paint defects/scratches Standard equipment - Overload safety valve - Press pressure gauge - Switching valve up / down - Cylinder piston chrome-plated - Press table with stake-out bolt - Operating instructions / CE Specifications: Pressing capacity max. 30 tons Electro-hydraulic drive Two drive speeds Manual Hand Pump Press table chain (height adjustment) Oil flow stage 1/2 2.82 / 11.84 l/min Piston speed level 1/2 9.8 / 3.57 mm/s Return speed 18.11 mm/s Motor power 1500 W Mains connection 400/50 V/Hz Machine height 2120 mm Machine length without pump 1000 mm Machine width 695 mm Inlet length 750 mm Strap width 260 mm Inlet height max. 950 mm Machine length with pump 1315 mm Machine width with pump 805 mm Piston stroke 380 mm Weight 385 kg Subjec ...

Manufacturer: Year of Manufacture: Model: WN29/ WPC-ELT-001-0248 Type of Machine: 400 Ton Hydraulic Press - Press Model: 225.400 - Weight (Net): 75,000 Kg - Maximum Force: 4000 KN - Nominal Distance from Bottom Dead Center: 12 mm - Normal Stop Position of Crankshaft: Top Dead Center Tooling and Capacity: - Maximum Tool Dimensions (Height x Width x Depth): 700 x 2500 x 160 mm - Maximum Weight of Upper Tools: 7000 Kg - Maximum Permissible Flywheel Speed: 489 RPM Operational Parameters: - Continuous Stroke Rate (Min/Max): 12 - 30 Strokes/Min - Maximum Clutch Engagements per Minute: 20 Strokes/Min - Maximum Effective Clutch Engagements per Minute: 10 Strokes/Min - Stroke Range (Min/Max): 200 mm - Slider Adjustment Stroke: 300 mm - Maximum Tool Speed (Adjustable Stroke): 700 mm Power and Pneumatics: - Electrical Supply (Voltage/Frequency): 400V / 50Hz - Installed Electrical Power: 4 ...

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.55 kW 1405 rpm -Max. Delivery rate: m³/h -Max. Pressure: bar -Max. Temperature: °C -Dimensions: 140/180/H380 mm -Weight: 19 kg

Key data: 3 , 40 , 14

Capasity 14,4 m3 Pressure 40 bar rpm 1450 power demand 3,6 kW

Window patch machine Heiber & Schroeder, Year 1986, Model: WP 1

TRITURATORE MONOLABERO LUNGHEZZA ROTORE 3000 DIAMETRO ROTORE 800 POTENZA MOTORE ELETTRICO 250 kW ORE LAVORO CIRCA 29000 GRIGLIE: 1 set foro tondo Ø 30mm 1 set foro esagonale 70mm 1 set foro a rombo 40mm 1 set foro tondo Ø 60 mm 2 griglie foro tondo Ø 100 mm

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

GRACO pneumatic pump ATEX, Maxflow: 9.5 L/min / 2.5 GPM / 5:1 RATIO, Max flow: 9.5 L/min / 2.5 GPM / 5:1 RATIO , Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max air WPR: 1.2 MPa / 12 bar / 180 PSI , Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI

GRACO pneumatic pump used in a pharmaceutical factory, LPM: 9.5, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI, MOC: 2.5, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , MPa: 1.2, Max Flow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO , bar: 12, PSI: 180, Max air WPR: 1.2 MPa / 12 bar / 180 PSI, MaxFlow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO

Used production line for packaging juices. The line consists of: - TRIBLOCK ARROW PET 9/9/3, NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) STM 2014 - BUFFER TANK 1000L STM 2014 - CIRCULATION TANK 80L STM 2014 - PUMPS WPS 4 - 2 PCS, RETURN PUMP CIP WPS 6 1 PCS STM 2014 - NUT FEEDER BCF1 STM 2014 - AIR CONVEYOR SET STM 2014 - PLATE CONVEYOR SET STM 2014 - ROTARY COLLECTING TABLE STM 2014 - PET BOTTLE ORIENTATOR SB6000 STM 2013 - SCREW CAPPER ZB 6000, NUMBER OF HEADS 6, OUTPUT 6000/HOUR STM 2013 - PRINTER HITACHI INK JET UX HITACHI 2016 - LABELLING MACHINE EC-09/ LABELER EC-09 BIENKOWSKI 2018

Honda WP30 HK: The Powerhouse for Height Differences, , Looking for the ultimate 3-inch water pump for challenging locations? The Honda WP30 HK (High Head) is specifically built for professionals who need to move water over long distances or significant elevation changes., , The Benefits:, Extreme Head: Designed for situations where standard pumps fall short (e.g., slopes, deep wells)., , Reliable Honda GX engine: Starts every time and delivers the consistent power you need, without compromise., , Durable Construction: With a cast iron impeller and robust frame, this pump is built to last., , Applications:, Quickly drain construction pits., Long-distance water supply for irrigation., Reliable emergency pump in case of flooding., , Technical Details:, Engine: Honda GX series, Maximum head: 30 meters, Maximum suction head: 7-8 meters, Inlet/outlet diameter: 3 inches (80 mm), Pump type: Cen ...

GRACO pneumatic pump, Max Flow: 9.5 L/MIN / 2.5 GPM, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max Fluid WPR: 6.2 MPa / 62 bar / 900 PSI

Warman ®, AH, ® pump 4/3, AH type: 4/3, AH storage: C standard number: WP35758 Hydrostatischer test pressure: 14 cash speed: 2751 the pump is as good as new. It was carried out only one test flow with the pump. from the cyclone supply up to regrinding, Flotation and departures is the Warman ®, AH, ® pump the best choice.

Piec Merrychef eikon® e2s jest doskonałym wyborem dla każdego, kto chce przygotować świeże, gorące posiłki na żądanie, gdzie wolna przestrzeń jest na wagę złota. Jest to najmniejsza jednostka oferująca najlepsze wyniki przyczyniające się do usprawnienia wszystkich czynności kuchennych. Piec jest łatwy w obsłudze, wszechstronny i zapewnia stały i wysoki poziom wydajności, który nieustannie wykracza poza oczekiwania. Piec jest dostępny jako eikon® e2s Classic w tradycyjnym wzornictwie Merrychef lub jako eikon® e2s Trend, z kolorową obudową na zewnątrz, łagodnymi krawędziami i miejscem na przechowywanie drobnych rzeczy na górze. Piec eikon® e2s jest idealnym sposobem gotowania, tostowania, grillowania, pieczenia i podgrzewania świeżych lub mrożonych produktów, takich jak kanapki, ciasta, pizza, ryby, warzywa i mięsa. Taka elastyczność wpływa poz ...

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Numer katalogowy 7309 DANE TECHNICZNE - max wysokość cięcia 170mm - max szerokość cięcia 510mm - max średnica piły 450mm - otwór tarczy 70mm - średnica wału 70mm z góry: - zapadki - 2 wały gładkie, poślizgowe z dołu: - 5 rolek wprowadzających, gładkich, poślizgowych - zapadki - wał ciągnący zębaty - wał z piłami - wał ciągnący zębaty - 5 rolek wyprowadzających, gładkich, poślizgowych - płynna regulacja prędkości posuwu - silnik posuwu około 3kW - silnik główny 22kW - średnica króćca odciągu 150mm - wymiary całkowite dł/szer/wys 4300x1600x1520mm - waga 1310kg – produkcji polskiej – dokumentacja DTR – wielopiła używana, stan bardzo dobry Net Price: 29900 PLN Net price: 6950 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

According to description pdf attached complete line for profiles + WPC profiles

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Key data: 250 KW, 314 kVA, 400 V

MODEL: EQ-BG312250 ENGINE: WP13D317E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 312.5(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 2275kg DIMENSIONS L/W/HEIGHT (MM): 311011341450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with yo ...

Multihead weigher - Multipak 24 3x8 plus Memory bucket for mixed product All stainless steel Up to 150 wpm IP65

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-BG125100 ENGINE: WP6D132E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 1085kg DIMENSIONS L/W/HEIGHT (MM): 25329501365 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your d ...

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...

The mixer combines hot and cold mixing. After hot mixing, the material automatically enters the cold mixer for mechanical cooling. -hot tank 800 l. - cooling tank 2000 l. - hot stirring time from 6 to 10 min. - cooling time from 10 to 15 min. - engine power 110 kW The device is adapted to the production of WPC terrace boards. Components needed for the product, such as PVC and wood dust or MDF dust, can be combined.

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Servo motor with gearbox and brake, permanent magnet motor SIEMENS 1FK7060-5AF71-1EH0 3000 rpm IP64 254 V Gearbox:: NEUGART WPLE 120 i 5:1 shaft: Ø 24 mm flange: Ø 115 mm used, tested ! Dimensions: 400 x 290 x 160 mm

POLYTYPE BDM 482/ 920 upto 8-Colors, only 6-Color-Heads mounted, Cup Printing Line, age 2014 Consisting of:-, Inclined Conveyor Feeder (acts also as an Accumulator), Servo Motor Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System with Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UV-Top (Leutkirch, Germany) VARIUS Powerjet BIF 1/ 815, 8 kW, UV Curing-On-Mandrel, 6 x individually hinged dry-offset Print Heads. (2 Extra Print Heads can be retrofitted), Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain with Ink Stirer., Ink Washing System on Print Heads, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter S ...

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC machining center at a Special PRICE! MASTERWOOD TF 100 2.0 Partnership Edition Furnishing: ----------------------------------------------------- - Drilling head with 16 drills for 5-sided machining - Grooving saw unit - Milling unit with 6-fold tool changer - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter - Preparation for CLAMEX and door package - 2 foldable roller conveyors - program-controlled central lubrication ----------------------------------------------------- SPECIAL PRICE 44,990.00 euros (plus VAT) ex works ----------------------------------------------------- Freight, installation, instruction within Germany including 8-hour training individually and on site SPECIAL PRICE 3,000.00 euros (plus VAT) Partne ...

x-travel: 1000 mm y-travel: 1600 mm z-travel: 800 mm Control: WENZEL WPC 2040/FW31.351 total power requirement: kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible.

We are pleased to offer for sale a Siemens SIPLACE SMT Machine Package, composed of the following equipment: ( tray units / accesories included ) 1.SIPLACE F5 HM Year of Manufacture: 2004-2006 Weight: 2,320 kg Technical Specifications - Operating Pressure: 5.5 – 8 bar - Air Flow: 300 Nl/min - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 3.3 A - Power Consumption: 1.8 kW - Circuit Protection: 3 x 16 A breakers - Max Motor Current (Rated): 16 A 2.WPW/3-900 Year of Manufacture: 2006 Weight: 230 kg Technical Specifications - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 0.7 A - Power Consumption: 0.4 kW - Circuit Protection: 3 x 6 A circuit breakers - Max Motor Current (Rated): 6 A 3.SIPLACE 80 S-15 HM Year of Manufacture: 1999 ...

Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.

DETAILED EQUIPMENT LIST (FULL PACKAGE) (A) Earthmoving, Excavation & Grading • 6 × Wheel Loaders LW500KN • 4 × Excavators CAT 326DL • 6 × Excavators CAT 323DL • 6 × Bulldozers ZD220-3 • 7 × Graders CAT 140K • 1 × Grader G9190 (B) Asphalt Production Line (Primary Plant Package) Asphalt Mixing Plant DQ4000 (Main Unit) – includes: • Bitumen pumps & pipelines • Fuel storage tanks & burners (diesel & heavy oil compatible) • Aggregate storage bins / cold feeders • Drying drum with burner • Bag-house dust collection system • Hot elevator & screening systems • Hot bins • Mixing tower with pug-mill • Control cabin (computerized) • Weighing systems • Bitumen emulsion plant (optional) • Filler silos & feeding system • Asphalt storage silos with discharge system • Spare parts package (critical wear items) • Road pavers & comp ...

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

GEA Filtration UF / MF membrane filtration plant Ultrafiltration / Microfiltration Plant Year 2006 Applicable: - Milk protein concentration MPC, - Milk casein concentration MCC, - Whey protein concentration WPC, - Yogurt, strained yogurt, quark - Feta cheese, fresh cheese - Cream cheese & labneh Spiral wound membrane filtration Membrane filter elements 6 '' diameter 4 x loops (stages) 32 x tubes (housings) Total membrane capacity 96 pcs 6338 elements Total membrane surface area 1824 m2

In-store baking oven WP BrillantDefectManufacturer : WPTyp : Brillant 4Details see picture

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer engine: Bautz type M404D-B0101-7000-0 -Voltage: 330 V. -Torque: 0.95 Nm -Speed: 6200 rpm -Holding brake: 2 Nm -Manufacturer gearbox: Neugart WPLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14/angle -Dimensions: 260/165/H105 mm -Weight: 5.2 kg

Used puller wagons with 10 pullers MIWE quail WPBäckerconditionWagon dimensions approx: W: 210cm D: 65cm H: 196cmPuller size: W: 200cm D: 58cmFor up to max. 180cm deep ovenStainless steel trolleysPullers made of ALUAn rollersSee pictureWe have various large pullers in stockOn request we can get new clothsDetails see pictures

Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 13 pieces -Type: RP CH WPD 139.7x4 30360 9 pcs. -Type: SF RO EN2 A... 139.7x4 P235 GHTC1 4 pieces. see photos -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/750/H140 mm -Weight: 78 kg with pallet

used bread press RotamatManufacturer : WPTyp : Rotamat GS380 Volt, weight range from 30 - to 80 grams30 graduation including 1 knitting plateThe Rotamat GS roll press from the manufacturer WP is a professional machine used in bakeries and other bakeries to form rolls and other pasta. The Rotamat GS enables precise and efficient shaping of the dough to produce uniform and attractive rolls. With this machine, bakeries can optimize production processes and ensure the consistency of their baked goods. The

THERMO SCIENTIFIC / DIONEX Ultimate 3000 UHPLC HPLC Chromatography System Year of manufacture: 2012 Different modules: THERMO SCIENTIFIC Pump LPG-3400SD (Pump) - RED status light Autosampler WPS-3000TSL ANALYTICAL (Autosampler / Autosampler) - GREEN status light Column compartment TCC-3000SD - GREEN status light RS dioda array detector MWD-3000RS - ORANGE status indicator RS fluorescence detector FLD-3400RS DUAL Pmt (RS Fluorescence Detector) - GREEN status indicator 2 X Solvent Rack Untested equipment A restart by a specialized technician is to be expected, some parts will have to be replaced

CONTROLS   CNC controls WENZEL TECHNICAL SPECIFICATION   x-Axis: 650 mm   y-Axis: 750 mm   z-Axis: 500 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1650 mm   space requirements -front/back-: 1380 mm   total height: 2590 mm   total weight approx.: 1340 kg Delivery includes: - HT400 WPC2040 computer trolley - HT400 control panel with standard cable - HT400 bracket (stone plate) RAL7016 - PC standard 4x RS232 - Black Swiss-style keyboard - 24" LED monitor - WENZEL machine documentation (USB) - WM|Quartis

Air conditioning compact unit EES type WPWG -LL- 32, compact unit room air conditioner with remote control, 220 V, cooling capacity 3200 W, heating power 3200 W Auction-ID: A7-45960-50

Height=1.5 m, Overall length= 0.95 m, Overall width= 0.61 m, Net weight= 245 kg,

Height=1.998 m, Overall length= 0.801 m, Overall width= 1.375 m, Net weight= 210 kg,