u. 其他存储设备 二手 出售

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

UHDE adjustable Feeder, vibrating. Lxw = 1200x600mm Capaciteit 80 m3/h Adjustable from 0% to 100% With magnetic vibrator UHDE MA220 380Volt 16Amp 50 Hz IP54 And new thyristor control.

P109 - used approx. 50 m³ / 50,000 litres polyester silo / GRP-silo, vertically standing, with funnel and support frame 3 x 3 m, in good condition. Twice in stock. volume: approx. 50 m³ / 50,000 litres material: polyester / GRP diameter: approx. Ø 3.00 m height silo: approx. 8.50 m height with support frame: approx. 12.00 m The container can be used as storage silo for water, liquid feed, flour, whey, potato steam skins, salt brine, dried fodder, molasses, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

UHDE adjustable, vibrating feeder Lxw = 1200x1000mm Capaciteit 110 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220 380Volt 13Amp 50 Hz And new thyristor control.

adjustable, vibrating feeder. Lxw = 1500x800mm Capaciteit 100 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220, MVE50, M60/130, MV 100/50 And new thyristor control.

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

approx. 10,000 pieces, Euro stacking container with 1 side to fold up, UTZ, 600x400x270mm, blue - used - : Price per item from location (net): Minimum purchase 6 pallets (min. 168 crates): only 5,50.-€ (net)! for truck acceptance 33 pallets a (approx. 1,056 pieces): only 5.- € (net) for complete acceptance: only 4,50 € (net)! A narrow side can be folded up or pushed back, similar to a garage door! Manufacturer: UTZ Type: Eurotec Year of manufacture: unknown Dimensions: L 600x W 400x H 270mm Dimensions inside: approx. L 57cm x W 36cm H 24cm Net weight: 3.62kg Amplifier floor, ribbed, suitable for conveyor technology Height incl. pallet stacked 7 crates high: 1.93m – 8 high approx. 2.18m high / 9 high approx. 2.42m high Approx. new price: 20.-€ (net) Condition: good, with embossed logo Weltbild Available: as of now, partial quantities only later L ...

Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021

The scope of delivery includes: 01x Particleboard/ flooring for mezzanine floors, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Particleboard thickness: approx. 38 mm Design: P4, grooved all around Weight / piece: approx. 65.50 kg Panel size: approx. 2.65 m² Colour top: raw Colour underside: white Note: - The chipboard is as good as new. Due to the storage, dust deposits may be present. - The chipboard does not have a spring. These are picked separately. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

SEW-USOCOME Type: S72 LP100 ( S72LP100 ) 4 kW 32 rpm 220/ 380 V 50 Hz IP 55 Dimensions: 94 x 29 x 32 cm Shaft diameter: 45 mm

SEW-USOCOME Type: S82DT 100L4/2BM/HR ( S82DT100L4/2BM/HR ) Power: 1.8 kW Speed: 19 rpm Voltage: 220/380 V Frequency: 50 Hz Degree of protection: IP 54 Dimensions:75x54x42 cm Shaft diameter: 60 mm

SEW-USOCOME Type: KF 76 LP112 ( KF76LP112 ) Power: 4 kW Speed: 121 rpm Voltage: 230/ 400 Frequency: 50 Hz Degree of protection: IP 55 Dimensions: 92 x 33 x 31 New ! Shaft diameter: 45 mm

Geared Motor SEW Type: K46LP80 DT80K4BM/HR/TF ( K46LP80DT80K4BM/HR/TF ) 0.55 KW 84 rpm 230/ 400 V 50 Hz IP55 shaft diameter: 30 mm New ! Dimensions: 660 x 270 x 200 mm

2000 UTZ Rako Plastic Crate 600x400x281mm Used goods, see pictures Manufacturer: UTZ Rako Material: PP grey Color: Gray Net weight 2.7kg External dimension: 600x400x281mm Inner dimension: 561x361x263mm Load capacity 20kg Volume 55 litres Negotiation price: € 6.50 net from stock P10272 28 pieces per pallet 2000 pieces available. Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Gear Motor with Brake SEW Type: SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) with Brake 0,0,0,0 25 KW 30 rpm 220/ 380 V 50 Hz IP54 shaft diameter: 30 mm used, tested ! Dimensions: 520 x 150 x 220 mm

Geared Motor SEW Type: R60DT63 K4IS ( R60DT63K4IS ) 0.12 KW 7.2 rpm 230/ 400 V 50 Hz IP55 shaft diameter: 22 mm New ! Dimensions: 420 x 250 x 200 mm

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete -Weight: 2 kg/piece

Gear Motor SEW Type: S47DT90L16/2/BMG/HR Gear Ratio: i=24,77 power: 0.09 / 0.9 KW speed: 12 / 111 rpm < br /> voltage: 230 / 400 V frequency: 50 Hz shaft diameter: 25 mm type B3, with foot New !", Dimensions: 540 x 270 x 210 mm

Geared motor with brake SEW R302D63N4B03/HR 0.18 kW 63 rpm 220 / 380 V IP54 B3, with foot shaft diameter: Ø 16 mm New ! Dimensions: 340 x 160 x 145 mm

Forklift Battery Charger, Industrial Charger, Forklift Battery Charger, Industrial Charger -Handover: in the current state as viewed -Housing: self-made -Power: V/A -Connection: 220 volts -Dimensions: 200/405/H400 mm -Weight: 20 kg

Three-phase electric motor with brake SEW KF66DT90S4BM/HR 1.1 kW 40 rpm 220/ 380 V IP54 Design: B5, with flange Hole spacing: 210mm Shaft diameter: Ø 35 mm New ! Dimensions: 650 x 350 x 270 mm

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm Approx. 7 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven ...

Gas cylinder cart, gas cylinder cart, steel cylinder cart, gas cylinder stair cart, stair hand truck -Manufacturer: Fedor Ulisch, stair hand truck with a wide shovel -Pipe frame: stable design with locking lever -Dimensions: 670/530/H1215 mm -Weight: 30 kg

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 18 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 130/248 mm -Weight: 14.7 kg/piece

Geared motor with brake SEW USOCOME R40DT63L 4B03 / HR ( R40DT63L4B03/HR ) 0.25 kW 74 rpm 220 / 400 V IP55 Shaft diameter: Ø 25 mm New ! Dimensions: 420 x 170 x 180 mm

incl. reel chassis HFW 1 and electric chain hoist EKZT 10-2

lifting force: 5,0 t height: 585 mm width: 230 mm weight of the machine ca.: 25 kg Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge Model with 10 to. Lifting capacity also available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 15 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 125/230 mm -Weight: 11.7 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 50 mm -Piston rod: Ø 35 mm -Threads on piston rod: 2x M 30 -Stroke: 100 mm -Dimensions: 445/140/H90 mm -Weight: 9.6 kg

500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Technical data of the pallet rack crossbar: Shelving System: Metal Sistem Type: Unipal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Steering cylinder: stroke 144 mm -Piston rod: Ø 55 mm -Piston rod mounting: Ø 20 mm -Receiving holes: see photo technical drawing -Cylinder: outer Ø 105 mm -Dimensions: 510/155/H115 mm -Weight: 18 kg

Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Steering cylinder: stroke 198 mm -Piston rod: Ø 40 mm -Recording piston rod: Ø 24 x24 mm / Ø 28 x 22 mm -Dimensions: 715/110/H115 mm -Weight: 12.8 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod mounting: 2x Ø 35 mm -Stroke: 150 mm -Dimensions: 780/205/H135 mm -Weight: 33.6 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston: approx. Ø 50 mm -Piston rod: Ø 36 mm -Thread on piston rod: 2x M 27 -Stroke: 160 mm -Dimensions: 695/140/H120 mm -Weight: 17 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 12 mm -Stroke: 60 mm -Admission piston rod: M12 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: Ø 55/H250 mm -Weight: 3 kg/piece

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 55 mm -Condition: used -Stroke: 135 mm -Dimensions: 550/160/H120 mm -Weight: 20 kg

V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 300 mm -Total length extended: 400 mm -Price: per piece -Number: 1x available -Dimensions: 95/95/H300 mm -Weight: 3.6 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 105 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 357 mm -Total length extended: 462 mm -Price: per piece -Number: 1x available -Dimensions: 96/96/H357 mm -Weight: 6.75 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 430 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Dimensions: 95/95/H683 mm -Weight: 1.35 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 50 mm -piston rod: 16 mm (connection M16 x 1.5 thread) -Total length: 383 mm -Total length extended: 583 mm -Price: per piece -Number: 1x available -Weight: 1.35 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 80 mm -Piston rod: 16 mm (connection M16 thread) -Total length: 260 mm -Total length extended: 340 mm -Price: per piece -Number: 1x available -Weight: 1.95 kg

Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane trolley, trolley -Manufacturer: Unelec, electric chain hoist with powered trolley -Crane chassis: electrically driven, beam width 120 to 190 mm -Chain hoist: Type UX 200UX100 24V2 -Load capacity: 1000 kg (2000 Kg) -Main lift: 4 m/min -Chain length: 6.4 m -Transport dimension: 860/700/H340 mm -Weight: 95 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: FMB Blickle, hydraulic unit with hydraulic tank from rotary transfer machine Uldrian TSM 22-8 -Hydraulic pump: pressure up to 120 bar -Flow rate: 22 l/min -Motor: 4 kW / 1500 rpm -Hydraulic tank: with level indicator, tank capacity 100 l -Oil cooler -Individual components: see photos -Dimensions: 720/500/H1630 mm -Weight: 293 kg

Axial piston pump, hydraulic pump, oil pump, gear pump, screw pump -Manufacturer: Universal Hydraulics, hydraulic pump screw pump -Type: HSSPA-3/26.6-AVR-V4-01 -Motor: AC motors 3 kW -Dimensions: 760/250/H300 mm -Weight: 39 kg

V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm -Weight: 29.5 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Bosch / Rexroth, control block from rotary transfer machine Uldrian TSM 22-8 -Valves: Bosch 0 810 091 227 0 811 150 233 -Rexroth: 4WE 6 D7X/HG24N9K4 -Individual components: see photos -Total dimensions: 390/350/160 mm -Weight: 30 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Bosch, control block from rotary transfer machine Uldrian TSM 22-8 -Directional valves: 2 x Bosch 0 810 091 227 081WV06P1V1012WS024/OODO -Individual components: see photos -Total dimensions: 180/160/130 mm -Weight: 7.9 kg

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg