toyoda 钻床，镗床 二手 出售

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-03882 Type of machine CNC Lathe - Inclined Bed Type Make ERNAULT TOYODA Type HES 52 Year of manufacture 1987 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details turning diameter 650 mm turning length 1100 mm control FANUC 10 T swing over bed 650 mm Spindle Bore 80 mm spindle turning speed range 7 - 4000 rpm transmission ratio 3 Rapid Traverse 12 m/min main drive 37 kW total power requirement 47 kW Weight of the machine approx. 12 t dimensions of the machine ca. 5 x 2.4 x 2. m Additional information 2-axes CNC-control FANUC 10 T 1 x 12-station turret VDI 50 programmable tailstock 3-jaw power chuck diameter 450 mm swarf conveyor

Toyoda 3-Axis CNC Vertical Machining Center Robust 3-Axis Vertical Machining Center Designed for stability and endurance, this 2008 Toyoda FV 1365 provides high-accuracy 3-axis CNC milling to support a wide variety of industrial metalworking applications. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Toyoda Model: FV 1365 Machine number: 0831 Year of manufacture: 2010 2. Operational parameters Travel (X / Y / Z): 1300 mm / 650 mm / 600 mm Table size: 1100 x 650 mm Max. load on table: 900 kg Spindle: 18.5 kW; 6000 rpm Tool holder: BT50 Tool magazine: 30 positions Control: Fanuc 3. Weights Machine weight: 7000 kg 4. Dimensions Overall dimensions (Width x Length x Height): 3506 x 3624 x 2940 mm ‍ ‍ Disclaimer: The technical specifications provided are for gene ...

Key data: 750 mm, 800 mm, 850 mm

Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale

Control: NCT table-size: 700 x 500 mm coolant: ja Tool bore: SK 50 2 clamping devices 20-position tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

Horizontal machining center Toyoda FH550S Year of manufacture: 09/2005 Control: Fanuc Description: X-axis: 750 mm Y-axis: 800 mm Z-axis: 850 mm Pallet: 550 x 500 mm Spindle power: 21.6 kW Spindle speed: 15,000 rpm Magazine: 60 tool positions chain magazine Coolant: Knoll high-pressure system Machine time: 83,000 hours Spindle/feed time: 20,000 hours Approx. space requirement: 3000x5700x2770mm Machine weight: 16,000 kg Horizontal machining center Find more here - / Contact us at -

number of spindle speeds: 6.000 U/min tool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production lin ...

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.

Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.

This 3-axis TOYODA FV 1165 was manufactured in 2008. It features a spindle speed of 12,000 rpm and a robust table size of 1300 x 650 mm, with a maximum table load capacity of 1,500 kg. The machine is equipped with a FANUC 18 iMB control and has a tool capacity of 30 tools. If you are looking to get high-quality CNC milling capabilities, consider the TOYODA FV 1165 vertical machining center we have for sale. Contact us for further details.

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.

Drilling machine manufactured in 1996. This Auerbach FBE 1200 features a Huron head and is equipped with a Heidenhain TNC 360 control system. With a working envelope of 1200 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis, consider the opportunity to buy this Auerbach FBE 1200 drilling machine. Contact us for further details.

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

This 6-axis IXION AUERBACH IA2 TLF-1200.4 drilling machine was manufactured in 2004. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 700 mm. The machine includes a robust rotary table surface of 1,000 x 1,000 mm and a maximum workpiece weight capacity of 7,000 kg. If you are looking to get high-quality drilling capabilities, consider the IXION AUERBACH IA2 TLF-1200.4 machine we have for sale. Contact us for further details.

Manufacturer: Avyac Model: NC540 Year of Manufacture: 2021 Type of Machine : Drill grinding machine Condition : Like new Operating Hours: 1200 approx Loading system: Yes, automatic loading system included Weight: 2,000 kg Certification: CE marked Application: Grinding of drill bits and single-lip drill bits Find more here - / Contact us at -