soraluce 钻床，镗床 二手 出售

Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.

Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1000 mm total power requirement: 22 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 10.000 x 6.000 x 4.250 m Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10373 Manufacturer: SORALUCE Year of construction: 2017 Type of control: CNC Control: Heidenhain 530i Storage location: Halberstadt Country of origin: Spanien X-Travel: 6500 mm Y-Travel: 1600 mm Z-Travel: 900 mm Table-Size (Lxw): 8000 x 900 mm Drive power spindle: 28 kW Swivel range milling head: 2,5 ° Tool Taper: SK 50 Feed rate: 15000 mm / min Further information: - Number of axes = 3 + 2 - incl. Swivel head

x-travel: 5.500 mm y-travel: 1.400 mm z-travel: 1.000 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 6.000 x 1.200 mm max. workpiece weight: 13.500 kg/m² Nc rotary table: - position: rechts, bündig integriert in Tischfläche surface area: Ø 1.000 mm positioning accuracy: 360 x 0,001 mm T-slot number x size: 12 x 22 Abstand 100 mm Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 28 kW Speed range, stepless: 15 - 5.000 min-1 max. torque: 815 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 80 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 20 kg changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 25.000 ...

x-travel: 3500 mm y-travel: 1600 mm z-travel: 900 mm turning speeds: 20-2000 U/min spindle taper ISO: SK50 Table dimensions: 5000x1000 mm control: Heidenhain TNC 415B spindle drive motor: 22 kW rapid traverse: 5000 mm/min Table load: 12500 kg range L-W-H: 7,3x4x3,2 m milling head -swivable +/-: CNC 360 ° weight of the machine ca.: 16 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

Manufacturer SORALUCE Model TA-D-35A Year 2009 CNC HEIDENHAIN TNC-530 Table Table Surface 1250 x 1,250 mm. Max weight allowed on table 4.000 kg Travels and feeds Longitudinal Travel (X Axis) 3,500 mm. Transversal Travel (Y Axis) 1,200 mm. Vertical Travel (Z Axis) 1,250 mm. Rapid Traverse 25,000 mm/min Main Spindle Head Type Automatic 2.5º/2.5º Taper ISO 50 DIN 69871 AD Turning Speeds 4,000 rpm Head Power 24 kW Equipment Integral protecting guards INCLUDED Chip conveyor INCLUDED Chip conveyor INCLUDED Internal Coolant INCLUDED Deposit 500l with magnetic and paper filter INCLUDED Portable Handwheel Heidenhain HR-410 Others Total Power 46 kVA Machine Weight 18,000 kg Machine Dimension 7,800 x 4,850 x 3,530 mm.

Control Siemens ... Sinumerik 840D Sl Table dimensions ... 1600mm Axis X ... 8000mm Axis Y ... 1300mm Axis Z ... 1800mm Spindle speed ... 20-4000 rpm ISO 50 cooling ... 30bar Rapid traverse ... 35m/min Machine weight ... 36500kg

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible.

Key data: 8000 mm, 1300 mm, 2200 mm

1 new CNC travelling column milling machine Make: Soraluce Model: FL 8000 Year of manufacture: 2014/15 Spindle hours: 3242 Hours: 4261 Control: Siemens 840 D Solution Line Technical data: Travel distances X-Y-Z: 8000 x 1300 x 1800 mm Travel C-axis: 360 degrees Plate clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm. Main drive: 43 kw. Rapid traverse: 35 m/min. CNC rotary table: 1600 mm 250 rpm Weight approx.; 40 to. Equipment / Accessories: Tool magazine: Controlled universal milling head Conveyor Full enclosure Complete cooling water system electronic handwheel IKZ. Fibro Reversible Clamp Fibr ...

CNC controller: Siemens Sinumerik 3.8 Axes X-axis travel mm: 6.000 Y-axis travel mm: 1.600 Z-axis travel mm: 1.000 B-axis degrees: Automatic head at 2,5º Feed rates m/min: 37 Rapid traverse m/min: 8 Worktable Number of pallets: 3 Table dimensions mm: 6.000 x 1.000 Max. workpiece weight kg: 3.000 Spindle Spindle speed rpm: 213 - 2.000 Spindle drive power kW: 22 Tool system Tool holder: SK-50 Tool magazine slots: 40 With free neighboring places mm: 350 With occupied neighboring places mm: 110 Max. Tool Length mm: 200 Max tool weight kg: 15 Tool-to-tool time s: 11 Cooling Tank capacity: 350 L; 3 to 8 bar Equipment Chip conveyor Mist collector Workarea light Blowing air and cooling outside the spindle Basic machine dimensions / weight Length mm: 10.200 Width mm: 4.700 Height mm: 3.887 Weight kg: 28.000

CNC Model: Heidenhain CNC Version: iTNC 530 Head Type: Automatic Bi-Rotary Head Additional technical notes for the head: Indexed on the two joints at 0.001° Tool Mount: ISO 50 Spindle power: 28Kw Spindle speed: 5000 Number of tools: 40 X-axis travel: 8500mm Y-axis travel: 1000mm Z-axis travel: 1450mm Fast feeds for linear axes X Y Z: 35m/min Table dimensions: 9000 x 1100mm Table capacity: 12000Kg High refrigerant pressure: yes External tank system with filter: yes Cutter type: mobile column Chip conveyor: belt Other technical data: Pendulum machining prepared for mounting a turntable above the bench with wiring and hydraulic connections installed and related operation in the electrical cabinet Machine equipment: Electrospindle: 12 kW, 20,000 rpm, HSK40 with 7-position tool changer 2 control consoles, (one in the operator's cabi ...

- FP Model ideal for variety of application Medium-Large size Components - Floor type milling boring machine - High dynamics with speeds of 35M/Min - INA linear guiding system  - Hydro mechanical clamping slides - Orthogonal milling head for machining at any desired angle - Y Travel = 2600 + 500 head upright = 3100 mm stroke in Y Axis 

- Aiptek ATC 30 positions - Automatic head 2.5 x 2.5 Gr - Central lubrication - Machine housing with front doors - Large tool package 

ATC Chain 40 positons Max. tool size  Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm

- Y Travel with head 180 = 3700 - Y from floorplate to spindle middle = 4200 mm - Chain ATC Tool changer 80 positions - Rotary table 1500 x 1500 with V-Axis 1500 mm - Table load 15.000 Kg - Optional Box table 3500 x 1000 x 1000 mm - Under power  - Spindle hours 9300 H 

Key data: 2000 mm, 1200 mm, 1200 mm

Soraluce bed milling machine with Heidenhain CNC 415, NC swivel head SK 50, chip conveyor, with drilling + milling tools + holders, approx. 50 parts. The machine was used for 1 layer for light machining and is now no longer needed. Please request further data.

CONTROLS   CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN   basic design: bed type WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   .. among of them simultaneous CNC axes: 3   X-axis travel: 3500 mm   Y-axis travel: 1200 mm   Z-axis travel: 1400 mm TABLE   workpiece load (max): 4000 kg   - mode of operation: automatic SPINDLE / HEAD   - positioning/indexing: 2.5 °   - positioning/indexing: 2.5 °   spindle revolutions (max): 4000 /min   tool fixture: ISO SK 50 AXIS DRIVES   rapid traverse: 20000 mm/min TOOL MAGAZINE   magazin type: chain magazine   number of positions: 30 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS &nbs ...

x-travel: 9000 mm y-travel: 3200 mm z-travel: 1900 mm w-axis: 1000 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Drehverschiebetisch 2 Stück table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested ...

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.

x-travel: 9000 mm y-travel: 3200 mm z-travel: 1900 mm w-axis: 700 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Drehverschiebetisch 2 Stück table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree Horizontal milling attachment Henninger angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and ac ...

x-travel: 8000 mm y-travel: 2600 mm z-travel: 1500 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Schiebe- und Drehtisch 2 Stück table load: max. 20 t turning speeds: 100 U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 43 kW number of tables: faceplate: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ortho head 1x0.001 degree Turning tool holder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...

x-travel: 6000 mm y-travel: 4750 mm z-travel: 1500 mm control: Siemens 840 D SL Table: Verschiebetisch table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us.  ...

Used scrollable radial drill Soraluce TR1-1600. Arm: 1600mm. Displacement: 1800mm. Drilling capacity in steel: 60mm. Drilling capacity in cast iron: 80mm. Boring capacity in steel: 100mm. Boring capacity in cast iron: 120mm. Thread capacity in steel: 50mm. Thread capacity in cast iron: 70mm. Spindle diameter: 90mm. Spindle travel: 350mm. Number of speeds: 12. Power: 7,5hp. CE: Optional.

x-travel:6000 mm y-travel:2100 mm z-travel:1500 mm Controls:HEIDENHAIN iTNC 530 BASIC DESIGN:. - basic design : travelling column :. WORKING RANGE -MILLING-:. - x-axis travel:6000 mm - y-axis travel:2100 mm - z-axis travel:1500 mm FLOOR PLATE:. - clamping surface (left-right):7000 mm - clamping surface (front-back):2000 mm WORKING SPINDLE / HEAD:. - spindle type : orthogonal head :. - tilting range:360 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - tilting range (2nd axis):270 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - spindle revolutions (min):20 /min - spindle revolutions (max):4000 /min - spindle diameter:90 mm - taper fixture : ISO SK 50 :. - spindle power (continuous):32 kW - torque (max.):910 Nm AXIS DRIVES:. - feed velocity (min):2 mm/min - feed velocity (max):20000 mm/min - rapid traverse:25000 mm/min ELE ...

automatic:Werkzeugspannung Spannk.15000 N total power requirement:63 KVA weight of the machine ca.:56000 kg table-size:22000 x 800 mm Tool bore:ISO 50, DIN 69871 AD x-travel:20500 mm y-travel:1600 mm z-travel:1000 mm dimensions of the machine ca.:24 x 6 x 4 m tool piece magazine with:30 Plätze

x-travel:8500 mm y-travel:2000 mm z-travel:1500 mm rapid travel x/y/z:25 m/min table-size:10.000 x 1.350 mm table load:max. 5 t/qm universal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/min power capacity:37 kW max. torque on the spindle:900 Nm internal coolant system feed:15 bar control:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KW dimensions of the machine ca.:12,7 x 5,2 x 4,6 m weight of the machine ca.:35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscella ...

x-travel:30000 mm y-travel:3600 mm z-travel:1900 mm milling head speed:1 - 4000 U/min spindle taper ISO:50 feed speeds:1 - 10000 mm/min rapid traverse:25 m/min milling spindle motor:46 kW total power requirement:85 kW dimensions of the machine ca.:45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine.

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.

Drilling machine manufactured in 1996. This Auerbach FBE 1200 features a Huron head and is equipped with a Heidenhain TNC 360 control system. With a working envelope of 1200 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis, consider the opportunity to buy this Auerbach FBE 1200 drilling machine. Contact us for further details.

This 3-axis AGIE Drill was manufactured in 2005. It features worktable dimensions of 300 × 400 mm and travel capabilities of 300 × 200 × 300 mm. The machine is CNC controlled and has a power rating of 4 kVA. If you are looking to get high-quality drilling capabilities, consider the AGIE Drill drilling machine we have for sale. Contact us for further details.