quaser 钻床，镗床 二手 出售

Year of construction 2003 Control Heidenhain iTNC 530 Table size 280mm Table load 200kg A-axis +/- 110 degrees B-axis 360 degrees X-axis displacement 700mm Y-axis displacement 590mm Z-axis displacement 480mm Spindle 15000 rpm Rapid passage 32m / min Automatic tool changer Yes, Big Plus spindle system Number of tools32 Tool length 280 mm Tool diameter 88 mm or 125 mm with adjacent pocket area Tool weight 7 kg Input400 / 3 / 50hz 33kW Equipment gap conveyors, coolant, handwheel, oil cooler Features Fully enclosed guarding Length 4000 mm Width 3000mm Height 3000 mm Net weight actually 9,490 kg. / 9.4 tons.

Key data: 1020 mm, 610 mm, 610 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.

Machine Details Stock-No. 1105-03857 Type of machine Machining Center - Vertical Make QUASER Type MK 60 II Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1020 mm Y-Travel 610 mm Z-Travel 560 mm tool taper BT 40 spindle drive 25 kW spindle turning speed range 60 - 10000 rpm tool change unit 24-speed BT 40 tool changing time 4 sec table-size 1200 x 635 mm table load capacity - central/maximum 500 kp Rapid Travel X/Y/Z 30 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 40 kVA Additional information CNC control HEIDENHEIN TNC 426 complete covering, A.T.C. for 24 tools BT 40 TABLE 1200 X 635 25 KW 10000 RPM CHIP CONVOYER

Control Heidenhain ... TNC 530 Clamping table surface... 600mm Axis X ... 800mm Axis Y ... 700mm Axis Z ... 610mm Spindle speed ... 20-15000 rpm controlled axes ... 5 cooling ... 20bar ISO 40 Max. workpiece weight ... 300kg Main engine power ... 25kW Rapid traverse ... 32,32,16m/min Number of positions in the tool changer... 30 Machine weight ... 8750kg L x W x H ... 3710x2530x3230mm

x-travel: 1250 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 610 mm z-travel: 600 mm tool piece magazine with: 48 Plätzen spindle turning speed - stepless: 15000 U/min Control: Manufacture: FANUC 18iMB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 x-travel: 885 mm y-travel: 800 mm z-travel: 520 mm B-axis (table): +30/-120 ° c-axis: 360 ° table-size: 600x500 mm tool magazin:: 60 spindle taper ISO: 40 Big Plus spindle turning speed - stepless: 15000 U/min total power requirement: 25 kW rapid travel x/y/z: 36 mm/min rapid traverse (slewing motion): 60 U/min rapid traverse feeds rotary table: 100 U/min dimensions of the machine ca.: 3.8x3.6x3.0 m weight of the machine ca.: 12,1 t Coolant through spindle: pressure: 20 bar 3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 for axes: 5 x-travel: 712 mm y-travel: 508 mm z-travel: 515 mm -A-axis table swivelling: +30/-120 ° -C-axis table rotating: 360 ° rotary table dia.: 330 mm no. of tools in magazin: 60 max. tool diameter: 88 mm max. tool-dia with free toolbox: 125 mm max. tool length: 280 mm max. tool weight: 7 kg spindle taper: SK40 Big Plus spindle turning speed range: -15000 U/min power capacity - milling spindle: 25 kW weight of the machine ca.: 12.8 t dimensions of the machine ca.: 303x395x367 cm 3D measuring tracer: RENISHAW Zero point clamping system:: LANG TECHNIK Coolant through spindle: pressure: 20 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Fully functional, still in operation in very good condition. Year of commissioning 2010 - it ran in single-shift operation. Direct measurement in all five axes. Speed 15000, the spindle is in excellent condition, cooling through the spindle center, water and air. ISO40 taper, tool magazine 48, BLUM LASER tool probe brand new, Renishaw workpiece probe. New chip conveyor. HEIDENHAIN iTNC 530 system with purchased kinematics. The machine has always been serviced by an authorized service. To this day, the parameters of the new machine do not differ from the parameters of our machine. By agreement, many accessories can be sold with the machine.

Quaser MV154 APC/P with Fanuc 18iMB. Good condition and electrified. Year of construction 2006 - Table 800 x 500 (2 pallets) - x, y, z = 700, 500, 560 - 48 Tools

control: FANUC 18i MB Number of axles: 4 St. x-travel: 710 mm y-travel: 610 mm z-travel: 650 mm b-axis: 0.001 ° size of pallet: 500x500 mm tool piece magazine with: 60 milling spindle: BT40 spindle turning speed - stepless: 15000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 15 t dimensions of the machine ca.: 5.1 x 3.7 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Manufacturer: Quaser Type: MV 184P/12B Year of manufacture: 2011

This 5-axis Quaser MV 204 IIU/10 vertical machining centre was manufactured in 2002. It features a tilting spindle head with a range of ±110°, a spindle speed of 10,000 rpm, and a spindle motor power of 15/33 kW. The machine includes a 32-position ATC, chip conveyor, and internal coolant at 20 bar. Consider the opportunity to buy this Quaser MV 204 IIU/10 vertical machining centre. Contact us for more information about this machine.

Inv. Num. : 8906 Type: MV 154 APC E 12B Producer: Quaser Created: 2012 Parameters: Control system: FANUC Oi-MD Work table length: 800 mm Work table width: 500 mm Maximum table load (even): 250 kg Spindle drive power: 11/18.5 kW Minimum vertical spindle speed: 50 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 700 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Cone: ISO 40 Machine height: 3080 mm Machine length: 4250 mm Machine width: 2850 mm Machine weight: 8500 kg Equipment: Chip conveyor Pallet Changer Workpiece Probe Tool probe

This 5-Axis QUASER MV204-CU/12 vertical machining center was manufactured in 2007. It boasts X, Y, and Z-axis travels of 700 mm, 660 mm, and 480 mm respectively, with a table diameter of 500 mm and a 32-position tool magazine. The machine features a SK 40 spindle taper, coolant inside the spindle, and rapid traverse rates of 30 meters/min. Ideal for intricate milling tasks, the QUASER MV204-CU/12 machine we have for sale ensures high precision and efficiency. Contact us for further details.

Manufacturer: Queser Model: MV 154 EL Year of Manufacture: 2012 Type of Machine : Machining Center - Low hours - Very good condition - Many tools Find more here - / Contact us at -

This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information.

Manufacturer QUASER Model MV204IIU / 10 Year 12/2002 CNC HEIDENHAIN ITNC530 3 work tables / pallets Table 1 Size Ø280 mm. Table 2 Size Ø 500 mm. Table 3 Size 600×400 mm. Weight allowed on table 265 kg Min-max distance on table 150-760 mm. Axles Travels (X/Y/Z) 700/590/480 mm Tilting head movement range (A-axis) ±110º Axis Positioning A 0.001º Table Rotation (C-Axis) 360º C-Axis Positioning 0.001º Fast Forward Axles (X/Y/Z) 32,000 mm/min Maximum Working Advance (X/Y/Z) 15,000 mm./min. Head Head Speed 10,000 r.p.m. BT-40 Head Cone Main engine power 15/33 kW Par 192/189 Nm. Charger Tools No. of Positions in Tool Loader 32 RANDOM tool change system Maximum tool length 280 mm. Maximum tool weight 7 kg Other Equipment Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Coolant tank capacity 280 l. Refrigeration electrical cabinet INCLUDED Clea ...

x-travel: 710 mm y-travel: 610 mm z-travel: 610 mm control: Fanuc - 18 MC total power requirement: kW weight of the machine ca.: 11500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 510 mm z-travel: 510 mm total power requirement: kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:1.500 mm y-travel:700 mm z-travel:610 mm control:HEIDENHAIN iTNC 530 table-size:1.400 x 700 mm tool taper:SK 40 numbers of positions in the tool changer:48 fach spindle turning speed - stepless:15000 1/min rapid traverse:36 m/min table load capacity:700 kg spindle drive:25 kW total power requirement:30 kVA weight of the machine ca.:9,1 t dimensions of the machine ca.:3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on",

x-travel:410 mm y-travel:610 mm z-travel:500 mm turning speeds:15000 1/min tool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mm table load:100 kg tool change unit:48 Pos. total power requirement:35 kVA weight of the machine ca.:7,4 t dimensions of the machine ca.:4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on"

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine.

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.

Drilling machine manufactured in 1996. This Auerbach FBE 1200 features a Huron head and is equipped with a Heidenhain TNC 360 control system. With a working envelope of 1200 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis, consider the opportunity to buy this Auerbach FBE 1200 drilling machine. Contact us for further details.

This 3-axis AGIE Drill was manufactured in 2005. It features worktable dimensions of 300 × 400 mm and travel capabilities of 300 × 200 × 300 mm. The machine is CNC controlled and has a power rating of 4 kVA. If you are looking to get high-quality drilling capabilities, consider the AGIE Drill drilling machine we have for sale. Contact us for further details.