promotech 焊接设备 二手 出售

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 € : 25 mm : 19 mm Weldon : 1.6 kW : M20 : 266 mm : 259 mm : 505 mm : 18 kg : 25 mm : 70 mm : 75 mm : 190 mm : 120-190 / 290-450 U/min : 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-spe ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 € : 12 mm : 19 mm Weldon : 0.45 kW : 316 mm : 235 mm : 328 mm : 115 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece ...

: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 € : 513.41 € : 1 : 1 : 30 mm : 60 ° : 500-2920 U/min : 50 - 150 m/min : 3 mm/min : 100 mm : 7.5 kW : 1216 mm : 1275 mm : 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 2095 € : 1 : 1 : 21 mm : 60 ° : 2820 U/min : 1.1 kW : 20 kg portable bevelling machine for processing plates and pipes integrated milling head with 10 square TCT inserts one universal guide plate for bevelling both plates and pipes continuous angle adjustment anti-vibration system for comfortable operations induction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm 260 - 600 mm (optional) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 1595 € : 1 : 1 : 21 mm : 60 ° : 2740-3290 U/min : 2.2 kW : 21 kg portable heavy-duty machine designed for bevelling steel plates and -pipes guide rolls for easy operation automatic overload protection two milling heads with 10 square cutting inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 1760 € : 1 : 1 : 18 mm : 60 ° : 2-5 mm : 1800-5850 U/min : 40 mm : 2.2 kW : 585 mm : 156 mm : 238 mm : 10 kg portable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plastic bevel angle and bevel radius depends on accessories continuous bevel width adjustment overload protection electronic speed control BASIC SET: BM-18 bevelling machine without accessories plastic case 32mm open end spanner allen wrench hex s = 6 Grease for fixing screws(5 g, 0.17 oz) user manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 7390 € : 142.63 € : 1 : 1 : 14 mm : 30 ° : 9 U/min : 6 - 40 mm : 55 mm : 100 mm : 2600 mm/min : 2.2 kW : 589 mm : 541 mm : 320 mm : 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1055 € : 12 mm : 19 mm Weldon : 1.1 kW : 400 mm : 126 mm : 185 mm : 10 kg : 12 mm : 40 mm : 40 mm : 45 mm : 370 U/min : 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) ...

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

SWELD welding machine - Mains connection: 415 V (50/60 Hz) 3 Ph. - Transformer fuse: 30 A - Duty cycle: 375 A 40 % 300 A 60 % 230 A 100 % - Protection class: IP 23 S Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

One used complete mesh welding line from SCHLATTER. This MG305 works from line wire off spools and pre straightend cross wires. This machine is very complete, from line wire pay offs to the automatic turning and stacking unit for meshes up to 8.000mm This MG305 can weld up to 10mm and do have 100 and 150mm equipment. For the production of the cross wires is a good VITARI straightening and cutting machine availible For this line a big spare part package is availible as well and a lot equipment as: Spools ( 3 ton ) Butt welder Mesh Package Lifter Automatic Mesh Package Tyning System Compressor Main Transformer etc..

offer 22629 TIG welding machine - air-cooled equal-alternating current system, mobile - for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - Welding current TIG infinitely adjustable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current indicator - Frequency control of the arc - HF ignition - Pulse device - Hose package 5 m -Reducer - Ground cable - Carriage - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

MG 900 Schlatter Width: 1250 mm Length: 2000 mm Diameter 2-8 mm Pull in Pull out Cross Wire Magazine Stacker

Welding apparatus type G 400 1 Manufacturer: Messer Griesheim

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

Offer 24367 Specifications: - Orbital welding machine AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circumferential seam welding device AXXAIR CC 220 with motorized concentricity - Raw cutting machine AXXAIR CC 80 -Trolley - Table height 830 mm - Connection 220 V - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

• Year 2022 (like new) • Offering up to 800 amps of gouging power with 50 % dutycycle, • the KempGouge ARC 800 is a heavy duty power source package that is designed for all types of carbon arc gouging. • KempGouge can be used with the majority of metals, such as steel, stainless steel, cast iron, nickel, copper, magnesium, andaluminum. • KempGouge lets you open roots or faulty welds and cracks, prepare welding grooves, cut metals, make holes and cleancasts, and remove excess metal. • The characteristics curve controlling the KempGouge’s operating parameters has been designed specifically for carbon arc gouging, so its gouging properties are optimal. • The noise levels of KempGouge have also been kept very low. • FAST AND EFFECTIVE Way to remove defects, backgouge the root, cut metal and pierce holes • EASY WAY To move the equipment and adjust t ...

Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse

Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment

Used welding equipment As seen in the pictures, technical data See pictures. If you have any further questions, please Price is per piece

Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm

Industrial Metalworking & Welding Equipment Inventory Overview: Offering a collection of heavy-duty vintage and modern industrial machinery. This inventory includes high-capacity press brakes, plate rollers, and specialized Oerlikon welding systems. Bending & Rolling Machines - Plate Bending Roller (35/3150): Wilhelmsburger (1959) - Plate Bending Roller (RMA 2500/8): Chr. Häusler (1963) - Heavy-Duty Press Brake (650t): Scharinghaus (1957) - Heavy-Duty Press Brake (500t K 1/3 M): Scharinghaus (1956) - Heavy-Duty Press Brake (200t): Scharinghaus (1955) - Profile Bending Machine (BO232 K): Hercules (1960) - Ring Bending Machine: Auersbach (Year N/A) - Swivel Bending / Folding Machine: Manufacturer N/A - Small Plate Roller: Manufacturer N/A Cutting, Pressing & Machining - Guillotine Shear (ScTP 25/3150): VEB Pressen- u. Scheren ERFURT (1966) - Small Guillotine Shear: Weingarten (Year N ...

400 V, with constant temperature control, with adjustable air volume and digital display for the air volume. For 40mm overlap with Cekom plug, with tension indicator, incl. wooden box. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 40 mm Weight: 57 kg Colour: green Dimensions: 740 x 480 x 470 mm Machine number: 1501221760

TruDisk 3302 laser device - TRUMPF TruDisk 3302 laser device with a beam quality of 8 mm mrad- output power 3300 watts on the workpiece- laser device with 1 cavity- beam guidance consisting of optical structure for 1 light path, fast crossover (50 ms switching time) and pilot laser incl. Electrical control- Integrated power supply and real-time capable control for evaluation and visualization of functional data- Fast laser power control- TruControl 1000 control- CPU with real-time operating system- 2 USB interfaces- 24 Dig. 1/0 interfaces, 4 of which are for real-time operation- Storage option for 199 laser programs- 1 TPB Profibus module EL6731-0010 Integrated intelligent water management (CLK) with water-to-water heat exchanger and display of operating states on the control unit- Safety monitoring according to laser protection class 1 incl. central safety lock- Housing for max. 4 l ...