polar mohr 裁切机 二手 出售

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite

Polar Mohr stacking lift L-1000-W-6 => refurbished for ergonomic working at user-friendly working heights Specifications Tub size 1400 x 1000 mm Stroke max. 910 mm Load capacity max. 1000 kg The automatic lifting of the material to be cut makes it possible to the operator at an ergonomically favourable working height for him the material into the vibrator or directly into the cutting machine shop. However, the stacking lift can also be used for stacking material to be sliced. The lowering takes place semi-automatic. This means that the process will be manually started and passed through the light barrier automatically stopped. POLAR stacking lifts do not have to be can be anchored to the ground and can therefore be easily be converted. Customer: - The productivity of the cutting machine increases by up to 10%, as the working height during loading/unloading rem ...

Description: -> built in 1999 -> medium format up to 75 x 105 cm -> with protective enclosure / security fence This transomat was used for unloading a high-speed cutter - standing on the right. The Polar Transomat uses split and undivided layers automatically onto pallets, while at the same time is cut further. As a result, production costs, depending on the cutting program, by 25 -70%. Thanks to the patented, movable pallet tip, the Polar Transomat has a particularly high edge accuracy. Increased productivity: stacking at the same time as cutting Improvement of quality: Particularly edge-accurate stacks can be created directly and faster Process.

SHM PCB for ED models Part number 020 182

Pappschere - Board Cutter Polar Mohr 110 Serial-No. 244 Cutting length max. 1200mm Table width max. 720mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600 Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

CUTTING LINE - refurbished - consisting of 1) Polar137EM-MON AutoTrim = Cutting LINE 2) Unloader/palletiser TR TR1 EL145-1 LH standing 3) Jogger RA-B-5 with air removal roller 4) Paper Lift Full description of Equipment on request

Paper pile elevator L-1000-3W Operationg controlpanel sensor controlled height adjustment Tray Size 4B - 70x100 cm Lifting capacity 1000 kg

920 x 920 ED - Program Control Colour monitor Air table Formica side tables with air Spare blade

Format 115 X Program Colour monitor Air table Side table on the right Polar Mohr LW 1000 Stapellift left Spare blade approx. 828 T Sections

Load capacity max. 600 kg, Platform size: approx. 750 × 1050 mm, Power connection: 380 V/50 Hz, The stack/pallet lift must be picked up at the location 77694 Kehl., Truck-loading ramp and/or forklift is available.

Polar Mohr 115 E, Year: 2001, Pileturner PW-4-ABV, Elevator, ColorDisplay TFT 10.4 Monitor, Programmable with memory, Side air table, Unloader

2 side tables 3 knives Photo cells Program

Size max 1.120 x 1.620 mm Lifting height max 1.040 mm lifting capacity 1.000 kg Weight 490 kg (approx.)

; Spare parts source

Built 1988 format max 720 x 870 mm operational height max 165 mm operational height 30 mm table height 860 - 950 mm equipment o air table o air dues in the table ; ready for use

1xRESERVE KNIFE FOR POLAR MOHR 66

1X RESERVE KNIFES FOR POLAR MOHR 72EC Format (cm): 72

Stacklift Polar LW 1200-6; cleaned and tested; 2 pcs.available; Load capacity 1200kg; Format 1050x1480mm. Pile lift Polar LW1200-6; cleaned and checked; two on stock; lifitng capacity 1200kg; size 1050x1480mm.

refined air table, autom. Flap on both sides, format 720 x 870 mm ,

3x RESERVE KNIFE FOR POLAR 55 EM Format (cm): 55

Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.

-Year 1990, Jogger with air press roller -Max paper size 1450x1130 mms. -Blowing plane -Folding squares on both sides -Height of introduction 16.5 cm -Max operating pressure 6-7 bar -380 V power supply

High-speed cutter with 72cm cutting width Hydraulic pressure infinitely adjustable Electrical connection 400V/50Hz

Standard high-speed cutter with 82cm cutting width Hydraulic pressure infinitely adjustable incl. 2 knives Electrical connection 400V/50Hz

2X RESERVE KNIFE FOR POLAR 55 EM Format (cm): 55

Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz

M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller

1X RESERVE KNIFE FOR POLAR 80 EL Format (cm): 80

Año 1997 Mesa de aire Barreras de seguridad (fotocélula) Formato 78cm

Año 1997 Mesa de aire Barreras de seguridad (fotocélula) Formato 78cm

Año: 1998 Formato 78 cm Programas

Vibrator Polar RA-4 Year 2007

Face cutting knife for Polar 66 Art.: PS153 Ersatzteil Nr. / parts No. 446282 / 280403 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 805x95x9.7 mm. Number of holes: 14 / M: 10 Number of rows of holes: Packaging : Disposable crate

Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!

Lift LW 1000-4

Messer für Papierschneidemaschine / paper knife - guillotine Polar 55 Art.: PS832 Ersatzteil Nr. / parts No. 241580 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 685x95x9.7 Number of holes M10: 14 Number of rows of holes: 2 Packaging : Disposable crate

M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife

Knife für Papierschneidemaschine / paper knife - guillotine Polar 76 Face cutting knife for Polar 76 Art.: PS342 Ersatzteil Nr. / parts No. 233231 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 925x110x9.7 Number of holes M10: 14 / 2 lift holes Number of rows of holes: 2 Packaging : Disposable crate

max. paper size: 90 x 90 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper knife - guillotine Polar 78 / 80 Art.: PS223 Ersatzteil Nr. / parts No. 424409 (273893) (446280) Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 960x110x11.7 mm. Number of holes M10: 18 Number of rows of holes: 2 Packaging : Disposable crate

Replacement knife Tool

Paper cutting machine Polar 76 EM, machine number 6461156, year of manufacture 1994, program control, air table, 1 spare blade, in good condition, immediately available We have another Polar 76 EM in stock. Please send us an inquiry. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Paper cutting machine Polar 92 EM-MON, air table, light barriers, program control, machine number 5811013, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.