ortmann _ herbst 饮料机 二手 出售

Tribloc Procomac / Ortmann & Herbst / Zalkin with Procomac rinser with 55 rinsing stations, Ortmann & Herbst Hansa B filler with 70 filling valves and 10 head Zalkin plastic screw capper incl. pick-and-place system The rinser Procomac will be blocked to the monobloc filler/capper by cardan capacity: approx. 18. 000bph based on 0, 5ltr. PET-bottle

Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024

Running direction: left - right Frequency-controlled for 26 mm crown corks Also suitable for PET bottles with crown corks

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Pressure filler Ortmann + Herbst/Crown Simplimatic 100/15/15 with 100 filling valves, 15head crown corker and 15head Zalkin aluminium cap screw capper with Pick and Place System model: Hansa M year of construction: 1999 running direction: left - right pitch: 113 mm with double pre-evacuation capacity: up to 40,000 bph by 250 ml mineral water bottles up to 30,000 bph by 330 ml beer glass bottles electrics: Siemens S7 with touch panel with safety cladding

ORTMANN + HERBST 100 / 20 Type Hansa B with 100 filling valves and 20head aluminium screw capper Pitch: 115 mm Capacity: up to 30.000 bph by 750 ml glass bottles Original year of manufacturing: 1994 The machine was complete refurbished in 2013 by company Hormes / Germany, incl. new electric system with Siemens S 7 and touch panel incl. new main bearing incl. new safety housing around the machine incl. two change part sets for 250 ml bottle and 750 ml bottle

Autumn HR rapid 15 cream maker, old model with double jacket, beaters and Stainles. Heating is untested, as the jacket is not filled. Machine is equipped with stepless speed regulation. Scraper for boilers is not to install. Machine should be checked by time.

Intermix Type: EIÜD 4-C with Bran + Lübbe fine dosing pump 4-component mixer Power: 30,000 ltr./h

• Suitable for mixing powdery and liquid media • Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) • Useful volume 8-32 litres • Operating pressure -1.0 to +10 bar • Temperature range 0-130°C • Max. Product viscosity approx. 10,000 mPas • Agitator tank 75 litres with double jacket 5 litres • Feed vessel 3.3 litres, operating pressure 0-10 bar, operating temperature max. 150°C, manufactured by Jentec, year of manufacture 2015 • Centrally arranged anchor agitator, power 0.37 kW, speed range 10-50 rpm, additional conveying elements on agitator shaft and outer anchor (product lowering), PTFE scraper elements for tank wall and base, double-acting mechanical seal, silicone oil sealing liquid • Eccentrically mounted propeller agitator with 2 blades • Operated with external circulating homogeniser for emulsifying and pumping over and out (not in ...

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.