ops ingersoll 铣床 二手 出售

OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - / Contact us at -

x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine.

This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information.

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

Control PC-NC Dialog Travel X/Y/Z: 1000/1510/700 mm C-axis 30-fold electrode changer Hirschmann clamping system Bearing surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

EDM machine Ingersoll OPS 600

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Key data: 90 m³/min, 3 , 20

Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235

Ingersoll Rand Man Rider Winch available for sale. Make: Ingersoll Rand Man Rider winch Model Number: FA51-MR24MK1G/06144 Serial Number: A015878 Year: 2010 Man Lift SWL: 6875 lb at 75 fpm at top layer Utility SWL: 11000 lb at 54 fpm at top layer Press: 90psig FLOW: 700 ROPE DIA: 3/4INCH Drum Size in: 15 Barrel Dia: 27 Flange Dia: 24Lgth

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

TO WHOW IT MAY CONCERN ; WE VE NEW UNUSED INGERSOLL RAND 150T AT OUR STOCK . READY TO SHIPMENT MODEL : 150T MPF88R54-020 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN ; WE VE RECONDED AIR STARTING MOTOR INGERSOLL RAND SS815R ( 4W 5107 ) FOR CAT 3512 ENGINE MODEL SS815R / CAT NO 4W 5107 SERIAL NO SP010524028 MAX PRESS 150 PSI READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Key data: 13750 mm, 5000 mm, 1000 mm

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1" (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85" (5000mm) Z-AXIS, RAM STROKE 39.37" (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42" (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79" X 509.4" (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79" X 255.5" TABLE SIZE, UN-COUPLED BACK 137.79" X 253.9" DISTANCE BETWEEN TABLE SECTIONS 39.37" DISTANCE BETWEEN COLUMNS 147" RAM CROSS SECTION 23.62" X 23.62" MAXIMUM HEIGHT TABLE TO RAM FACE 127.95"  ...

Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL RIM, CHARLES MAIRE BALD326L CM330462 ( BALD326LCM330462 ) Pmax: 6.3 bar speed: 390 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 410 x 50 x 42 mm Dimension ( Package ): 520 x 110 x 90 mm

Compressed air filter INGERSOLL RAND GP 2119 ( GP2119 ) Bj: 2006 60 m3/min 16 bar gebraucht, geprüft ! Dimensions: 650 x 650 x 1700 mm

Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD32SL CM390468 ( BALD32SLCM390468 ) Pmax: 6.3 bar speed: 300 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 420 x 240 x 45 mm Dimension ( Packaging ): 520 x 300 x 90 mm

Pneumatic Ratchet, Pneumatic Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool Holder: 3/8 New ! Dimension ( Air Ratchet ): 390 x 80 x 60 mm Dimension ( Packaging ): 520 x 110 x 90 mm

TO WHOM IT MAY CONCERN ; WE VE 1 PC REBUILT AIR STARTER INGERSOLL RAND ST 499 IC 03L AT STOCK. ( EX STOCK ) PLS FIND DETAILS ON BELOW TYPE ST 499IC03L SERIAL NO. SP110221056 MAX INLET PRESSURE 90 PSIG MADE IN USA IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

Second Hand Screw Compressor Ingersoll Rand R37IE-A 37 kW, 7.6 bar at 6.46 m3/min. Built in 2013 with only 18,254 hours

for sale 5 compressors INGERSOLL RAND year 2004 at 2019 model: 2x units C70MK3 430 KW 1xunits MGP655D 48 KW 1xunits C700 100 630 KW 1xunits HKO 400 480KW

Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerant Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/230V, Photos/film available: Photos available 10.2.197

This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre.

End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Load 6000 kg, pneumat. Drive

Key data: 860 , 2

v

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Pressure: 7.5 bar Power: 132 kW Voltage: 380V/ 400V Frequency: 50 Hz

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 10.19 Working pressure max bar: 7,5 Total power installed kW: 63 Rotation speed max rpm: 1465 Weight Kg: 1480

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

Key data: 250 , 4 , 45

Electr. Power: 250 KW Motor speed:1492 rpm Voltage: 400 V Weight: 5630 kg The compressors have been taken over in operational condition and are complete.

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

SPECIFICATIONS Free Air Delivery 70.7cfm/2002lpm Pump 3000 cast iron NO. of Cylinders 3 Compression Stages 3 Free Speed (rpm) 780 Oil Limit alert Switch STANDARD Auto Condense Drain NO Motor Size 15kw/20hp Power Type 415v 50Hz electric Engine N/A Drive Type Belt Working Pressure 175psi/1200kpa Starter Star Delta Starter Constant/ Dual Controls STANDARD Centrifugal Unloader STANDARD Air Tank Capacity (L) 445L Mounted Type Tank Mounted Weight (kgs) 750 Dimensions Lxlxh (mm) 1900x1100x1540 NOise Level dB(A)1m 86.2

test

Compressors Nirvana oil-free variable speed screw compressors 55-75 kW it ran 19138 hours. Nirvana oil-free compressors, with a matching variable speed inverter and hybrid permanent magnet motor (HPM®), offer unparalleled energy efficiency at all speeds and outstanding reliability. They deliver ISO 8573-1:2010 Class 0 certified, 100% oil-free air for the most critical applications Find more here - / Contact us at -

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...

New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Age 1999, Consisting of:, Unwind Stand, Preheater ILLIG VWH72, Indramat Servomotor Indexing, Print Registering for Preprinted Film, Max. Film width 610 mm, Max. Thickness range 0.18 to 2.5 mm, Hardened Transport Rails, Double Heating, Heating Load 41.0 kW, Heaters move forwards automatically with pneumatic control, Sheet Sag Control, Form Area 550 x 400 mm, Forming & Punching in Mold with integrated Steel Rule Die, Positive Draw 20 mm, Negative Draw 20 to 40 mm, Trimming Force 50kN., Top and Lower Platens Moved by separate Indramat Servomotors, Heavy duty Toggles on both upper & Lower Platen, Stacking/ Counting Station, Waste Material Winder, Inline ILLIG RS75b Grinder with Blower, Suitable for PS, OPS, PP, PE, PVC etc., PLC: Siemens S5, PLC: Siemens S5, Max Film width: 610 mm, Form Area: 550 x 400 mm

Kiefel Speedformer KMD78 BFS Thermoformer with in-mold trimming using steel rule Knives., Age 2012, Suitable for PS, OPS, EPS, PP, PE, PVC, APET or CPET., Motor Indexing of sheet, Double Heating, Auto Transport Rail spreading for PP, Auto-sheet sag control, Film width max. 810 mm, Max. Form Area 760 x 540 mm, Max. negative/ positive Forming height 150 mm above and below sheet level, Dry Cycle rate 60 strokes/ min, In Mold trimming using Steel-Rule Knives, BFS Punching force: 650 kN, Machine equipped with: film Indexing, infrared heating (top and bottom), forming and in-mold punching unit, Inline SPEED STACKER Counter/ Stacker, residual film rewind, outfeed conveyor, manual removal, Siemens SINAMICS controls and touch panel HMI.

A complete Boge compressor system with a capacity for 16 compressors with a central control system is available. 1) Boge SLF 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4700kg. 2) Boge S 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4500kg. 3) Boge S 180 screw compressor, capacity: 20.8m³/min, cooling air volume flow: 5000m³/h, drive motor: 132kW, weight: approx. 3200kg. 4) Microfilter Boge FFP 250. 5) Refrigeration compressed air dryer Boge DS 460, capacity: 46m³/min, max. operating pressure: 14bar, weight: approx. 500kg. 6) Refrigeration compressed air dryer Boge DS 260, capacity: 20.8m³/min, max. operating pressure: 14bar, weight: approx. 240kg. 7) Boge tank, volume: 5000l, max. tank pressure: 11bar, weight: 1200kg. 8) Condensate cleaning  ...

Manufacturer:Jurmet Model: REWER Year of Manufacture: 2014 Condition: Used Technical Specifications - Weight: 2,000 kg - Power Supply: 14 kW - Voltage: 3x400 V - Air Pressure Required: 7 bar - Rewind Material Types: OPP, PET, PVC, OPS, LDPE, 40–50 µm cardboard - Material Width: 500 mm - Winding Speed: 0–400 m/min - Max Winding Diameter: 800 mm (1 shaft, core Ø76 mm) - Max Unwinder Diameter: 800 mm (1 shaft, core Ø76 mm) - Max Roll Weight: 400 kg - Wind Direction: Left to right / right to left (bi-directional) Included Features - Separate lay-on shafts: 2 pcs (rewinder and unwinder) - Ultrasonic web guide system - Splice table with waste rewinder - Rotary knife slitting module - Touchscreen control panel - Adapter diameter: 152 mm (2 pcs) - Stroboscope with tape control sensor Find more here - / Contact us at -

Material : PP, PS, APET, CPET, PLA, OPS, EPS, PVC // Forming Area (Vxh): 780x570

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...

Key data: 8 KW, 10 kVA

We currently offer: Number 1 Ingersoll Rand generator set Type: G10 Engine Mitsubishi Generator LeRoy Somer Type: 42.2S4 V6/4 Power: 10.4 KVA / 8.3 KW RPM 1500 Hz 50 IP 23 AVR control R438 Year of manufacture 2007 Hours 13800 Connection 16A Metrics: L: 1.58m H: 1.15m W: 0.85m Weight: approx. 750 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Number 51 Ingersoll Rand generator set Engine John Deere Generator LeRoy Somer Power 150 KVA / 120 KW Hz 50 RPM 1500 Year of manufacture generator 2014 / Year of construction generator set 2003 Hours: 14555 AVR control R450 You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - / Contact us at -