okamoto 磨床 二手 出售

MAX DIAM 400, MAX MODUL 8

4. Specifications Item Unit OGM-250UDX Capacity Swing diameter over table mm 220 Distance between centers mm 500 Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (center of workpiece) Grinding wheel Outer diameter x width x bore mm  305x25x  127 Rotational speed (by changing the belt) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding headstock X-axis travel mm 203 Angle of inclination degrees + 30o Min. travel increment mm  0.001 Feed value with hand wheel mm/min  2 per revolution of the wheel Table Z-axis travel mm 640 Angle of inclination degrees 4 to 9 Feed rate with hand wheel mm 7.5 per wheel revolution Automatic feed rate mm/min 50 to 4000 Head Workpiece Spindle type - Spindle for combination of non-rotating- rotating Morse taper No. 3 Spindle through hole diameter mm  17.5 Spindle speed min-1 10-500 Angle of inclina ...

working area: 225 mm table-size: L:550 mm table-size: B:200 mm sanding disc diameter: 200mm mm magnetic plate size: 500 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2000x1600x2100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: - mm grinding width: - mm workpiece height: mm control: Grind-X total power requirement: kW weight of the machine ca.: 2900 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length 600 mm Grinding width 320 mm Workpiece height max 500 mm Table movement longitudinally 750 mm Table movement transverse 340 m Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speeds 1500 rpm Rapid traverse vertical 400 mm/min Power 3,7 kw Automatic delivery Magnetic disk Coolant Setup Weight 2500 kg

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

grinding length: 600 mm grinding width: 400 mm workpiece height: 400 mm total power requirement: kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3592 x 3519 x 2203 mm Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter sys ...

This OKAMOTO ACC 64-106 CA-iQ was manufactured in 2023. It features a variable wheel speed up to 2800 min⁻¹, a spindle motor power of 7.5 kW, and a grinding wheel size of 405 x 50 mm. Ideal for precision surface grinding, this machine offers advanced control with its hydraulic and servo motors. Contact us for more information about this machine.

voltage: 380 V connected load: 7,5 kVA dimensions: 2725 x 1930 x 1773 mm weight of the machine ca.: 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - ...

This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details.

internal diameter: 200 mm grinding depth: 80 mm swing diameter: mm stroke of the table: X= 300 mm stroke of the table: Y= 500 mm control: FANUC 18i-TA total power requirement: 7 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Internal grinding diameter: (6) - 100 mm Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Grinding spindle speed ...

dimensions of the machine ca.: 380 x 200 x 134 mm weight of the machine ca.: 24 kg power requirement: - kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Condition: unused: Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.