nardini 车床 二手 出售

New lathe. Distance between centers: 800mm. Swing: 350mm. Swing over carriage: 200mm. Spindle hole: 46mm. Speeds: 18. (31,5-2500rpm). Power: 4hp. Dimensions: 2050x1000mm. Weight: 1100Kgs. Equipped with chuck and steady rest.

New lathe. Distance between centers: 2200mm. Swing: 500mm. Swing over carriage: 330mm. Swing in gap: 690mm. Spindle hole: 52mm. Speeds: 18. (25-2000rpm). Dimensions: 3700x1000mm. Weight: 1750Kgs. Equipped with chuck and steady rest.

New lathe. Distance between centers: 1000mm. Swing: 500mm. Swing over carriage: 305mm. Spindle hole: 80mm. Speeds: 18. (19-1500rpm). Weight: 1680Kgs. Equipped with chuck and steady rest.

turning diameter over bed: 350 mm turning diameter over slide rest: 310 mm turning length: 700 mm total power requirement: 4,6 kW weight of the machine ca.: 1,0 t Dimensions (HxWxD): 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - ...

Specifications: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter via support 135 / 270 mm - Center width 1000 mm - Spindle bore 52 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - Feeds longitudinal + flat - Metric Threads / Withworth Threads / Module Threads / DP Threads - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center punch, new Multifix size B with 3 inserts

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display

A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible.

bed width: 190 mm daylight: 120 mm centre height: 220 mm dimensions of the machine ca.: 0,4 x 0,15 x 0,5 m weight: ca. 20 kg Additional bezels available upon request - Photo 2. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mm turning diameter over slide rest: 270 mm turning length: 1.500 mm center height over bed: 220 mm digital readout: FAGOR 3 Achsen turning diameter in the gap: 620 mm centre distance: 1.500 mm bed width: 280 mm spindle bore: Ø 52 mm turning speed range: 30 - 2.360 U/min 3-jaw-chuck diameter: 250 mm quick change toolholder: KLOPFER Typ GX2B drive capacity - spindle motor: 6,3 kW taper in tailstock-quill: MK 4 dia. of quill: 60 mm quill stroke: 200 mm coolant: voltage: 380 V total power requirement: 6,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lead & Pull Spindle Lathe NARDINI MS 125 E -Peak height above bed 150mm -Turning diameter over support 140mm -Tip width 500mm -Spindle speeds 50-2500 rpm -Spindle passage 34mm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK3 -Collet quick-clamping device with various collets 173E -Tool cabinet with machine-related accessories -Swarf back wall -Documentation Dimensions: LxWxH 1.6xx0.7x1.6 meters / Weight 1200Kg

Plan - Spiral - Lathe Chuck Diameter 190 mm Centrally adjustable base jaws Individually adjustable top jaws Through-hole 50 mm Bolt circle 176 mm Height 145 mm Weight 14.5 kg

Steady Ø 310 mm

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Steady Ø 145 mm

Steady Ø 195 mm

Steady Ø 65 mm

Leroy Somer motor Type: LS80 230/380 volt 1,5 kW 2840 rpm

220/380 volt 2865 rpm 2,2 kW

Steady Ø 60 mm

TOS chuck 200 mm

Freetech motor 0,8/1,1 kW 400 volt 1400/2800 rpm

Type: MI 70 FP F3 30/1 ratio

Carpanelli motor 230/400 volt - 0,25 kW - 1340 rpm 266/460 volt - 0,3 kW - 1600 rpm

AEG motor Type: AM100LS8/4 400V 0,7/1,3 kW 700/1380 rpm

Elprom motor Type: 112M4 B14F165 4 kW 230/400 volt 1420 rpm 30 kg

Efacec universal motors Type: BF5 132M 848 200/230/220/240 volt 2,2/3,3 kW

Type: SW/075T

Aja motor Type: 80/80/4 230 volt 0,8/1,2 kW 1400/2800 rpm

Aja motor Type: 80/80/4 230 volt 0,75/1,17 kW 1400/2800 rpm

Eldrive motor Type: EF 63B 4 1360 rpm

Jinshin motor Type: AEVF - frame: 112M 415 volt 3,7 kW 1430 rpm 40 kg

AEG motor Type: AM80ZCA4/2 230V 0,8/1,2 kW 1425/2800 rpm

Jinshin motor Type: 112M 3,7 kW 220/380V 1430/1720 rpm 45 kg

Leroy Somer Type: LS9013 2,2 kW 220/380V motor 1390/1740 rpm

Elco Cozzi motor Type: CN400 2,2 kW 220/380 volt 1400 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Ansaldo motor Type: A1C 131 1A A000 7,5 kW 2900 rpm 220/380V

Type: C132MB 7,5 kW 380V - 16 amp

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg

Specification: Automatic plate

different sets for an F 200 3 jaw chuck (base jaws on top jaws)

gebr. Chuck 4 jaws chuck, Fabr. Röhm, 315 mm

Röhm 20641, KFM 130/2, Power Chuck 130 MO KFM 2-Jaws, ZA110 Overall diameter: 130 mm PF003850 Number of Jaws: 2 Jaw Stroke: 5.5 Inner diameter: 46 mm Width: 63 mm Manufacturer's specifications for technical data: Max. actuation force: 5 kN Max. total clamping force: 11 kN max. speed: 3950 rpm rpm min^-1 at that time new price approx. 4500€ You can find more power chucks - new and used - in our shop! International shipping costs on request!

gebr. 3 & 4 jaw chuck from Röhm with 125 mm diameter.

Chucks 4 claw dia:1000 mm

Lathes accessories, measuring equipment etc., contents of this cabinet page