möhringer 锯床 二手 出售

- 1.2 m wide - approx. 2.75 m long - from 0.5 to 1.1 m upward

Spurt width: 980 mms edition height: 430 mms impulse: 0.37 kW auxiliary carriages in reinforced execution with Kippschaemel and running around role chain for model, with a hydraulic tiltable and adjustable Muldenschaemel for round timber, including cables and cable balance.

Technical data: intended purpose: Planks Achsabstand: 2 m rope number: 4 pieces impulse achievement: 4 kW chain division: 125 mms lax strength: 40 x 10 mms

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.

Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed,  ...

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller  for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end

Technical data: 6 kW Type: 233 407 00

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

Specifications: Wheelbase: 1.0 m Number of strands: 5 strands Propulsion: 2.2 KW

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Specifications: Wheelbase: 1.3 m Number of strands: 4 strands Propulsion: 2.0 KW

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977

Lifting cross conveyor ame900 is installed in this roller table ame899 Length: 8m, 1600mm width, 4 kw motor drive - with ball-bearing rollers, mounted on Shape - Driven by a special geared motor - Position roller chain - Spring-actuated length compensation Furnishings - With 2 liftable support rollers to hold the cant - Fixed baffle wall

Number of arms: 3 pcs. max. lifting capacity: 2 t - with heavy-duty storage arms - Arm lift and adjustment by hydraulic cylinder - Substructure in heavy steel construction Year of construction 1979 Revision year 2014

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014

Gebr. roller conveyor with built-in QFA Bearing No.: ame896 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2101 QFA M2103 Drawing number: ROGA 24200621 QFA 14800266 Specifications Roll width: 1200 (mm) Length: 4,705 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 4.0 (kW) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor heavy Wheelbase: 1.56 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Gebr. Roller conveyor Bearing No.: ame894 Make: Möhringer Year of construction: 2021 Machine number: M2102 Drawing number: 24200622 Specifications Roll width: 800 (mm) Length: 4.07 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 2.2 (kW)

Gebr. roller conveyor with built-in QFA Bearing No.: ame893 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2103 QFA M2105 Drawing number: ROGA 24200623 QFA 14800267 Specifications Roll width: 800 (mm) Length: 3.5 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor Wheelbase: 1.16 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Clamping carriage SWVH1K - Used, factory refurbished Bearing No.: asw875 Make: Möhringer Year of construction: 1994 Machine number: 9401 Part Number: 96900008 Specifications: Gauge: 980 (mm) Support height: 430 (mm) Clamp opening: 800 (mm) Plier rotation: 360° hydraulic Travel drive: hydraulic Travel speed: forward and backward 100 (m/min.) Drive power: 4 (kW) Overall length: 3,200 (mm) Weight approx.: 1,350 (mm) Type of control: remote controlled

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

New log wagon inclined 17° Timber lengths 2 – 5m Diameter 200 – 1000mm Tension trestles 3 pieces Clamping trestle opening 1000mm Longitudinal adjustment 1 trestles adjustable – 2 trestles fixed Clamping claw opening 900mm Clamping block adjustment servo-electric Cable drive 45kW