millutensil 压力机 二手 出售

Key data: 150 t

For sale is a used hydraulic spotting press Millutensil MIL 163 from 2004 with a pressing force of 150 t. The 4-column press has a table size of 1,300 × 1,600 mm, a maximum installation height of 1,300 mm and a column spacing of 1,700 × 1,370 mm and is particularly suitable for spotting, try-out and tuning work in tool and mould making. Technical data + information: Spotting press – Millutensil MIL 163 – 150 T Allgemeine Disclosures - Manufacturer: Millutensil - Model: MIL 163 - Year of construction: 2004 - Type: 4-column spotting press - Press force: 150 T (adjustable) - Column spacing: 1,700 × 1,370 mm - Table size: 1,300 × 1,600 mm - Max. installation height: 1,300 mm - Table height from the ground: 610 mm - Overall dimensions (WxDxH): approx. 2,000 × 2,550 × 4,600 mm - Total weight: approx. 19,000 kg - T-slots: DIN 650 / 22 Werkzeugbelastung - Max.  ...

This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information.

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information.

Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Key data: 18 t

Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm

- Closing force up to 18000 Kg - Opening force up to 15000 Kg - Driven table in & out feed - Upper table 270 Gr - Upper size 900 x 550 

- Pressure 0 - 250 Bar - T Size T-22 - Opening force 35 Ton - Closing force 150 Ton - Distance between column 2130 mm - Table height over floor 770 mm - Upper table rotation 180 Grad

- Table size 3500 x 2500 mm - Siemens Simatic OP7 controller - Max. work load 80 Ton - New price 1 Mil EUR - Working force up to 250 Bar - Power 30 kW

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

This stamping machine was manufactured in 1992. It features a robust Eccentric H-frame, monoblock design with a press force of 1600 kN and a fixed stroke of 160 mm. The machine includes a magnetic conveyor for scraps, a quick die cart system, and a millutensil oiling system. Ideal for high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 160 machine we have for sale. Contact us for more information about this machine.