man 起重机 二手 出售

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Man 12 Cylinder container for sale. Price: Please Apply Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.

2 pieces of crane bottles

DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Headliner (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: laterally 3 meters and forward/backward 2 meters Steel beams: included in the offer Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Su ...

Crane hook Capacity: 80 tons Crane hook fully functional, but not suitable for our use.

Technical data: - Load capacity 8000 Kg - 3 stop chains variable with hoe load capacity each 5000 Kg - 2 x chain length with hoes max. approx. 500 mm - 1 x chain length with hoes max. approx. 2000 mm - 1 x arm length approx. 750 mm - 1 x arm length approx. 1200 mm - 1 x arm length approx. 1400 mm - Mounting arms adjustable on the side - Mounting bracket adjustable in grid - Traverse dimension approx. L 1800 x W 2200 mm - Weight with chains approx. 550 Kg

Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm

TECHNICAL SPECIFICATIONS Manufacturer: PFEIFER Seil- und Hebetechnik GmbH Description: Two-crane crossbeam, crane crossbeam, pipe crossbeam Type: 270092 Year of construction: 2015 Load capacity: 40,000 kg Weight: 3,150 kg Working length/gripping range: 1,920 - 7,250 mm SPECIFIC COMMENT - Variable anchor points - Ideal for transporting heavy concrete segments - Last inspection in accordance with BetrSichV 09/2023

Specifications: - Load capacity 8 t - Usable height 620 mm - Total height 780 mm - 4 pieces of load pick-up double hooks adjustable - Grid distance adjustment double hoes 100 mm - Truss beam IPE 240 - Total length approx. 2000 mm - Total width approx. 1050 mm - Weight approx. 350 kg

weight max. in kg: 10000 kg weight: 10 kg dimensions: 700 x 300 x 300 mm with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible.

lifting force: 5,0 t height: 585 mm width: 230 mm weight of the machine ca.: 25 kg Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge Model with 10 to. Lifting capacity also available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25153 Specifications: - Load capacity 12.5 t - Truss length 2900 mm - Truss height 350 mm - Truss beam consisting of 2 x UNP 200 - 2 x sling chains with ring + shekel L 1400 mm - Anchor points with spacing 1400 mm - left + right 4 pcs double load handling hooks each - Distance between the mounting hooks 300 mm each - Space requirement approx. L 2900 x H 350 x D 500 mm - Net weight approx. 500 kg

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Technical data : - Load capacity approx. 30 t - 2 crane mounting holes with through bolts 80 mm - Distance between the mounting bolts 100 mm - 2 stop extinguishers with a diameter of 65 mm - Distance between stop openings 235 mm - Stop height 800 mm - Overall height 990 mm - Truss beam HEM 360 - Truss dimensions approx. L 3150 x W 400 x H 480 mm - Weight approx. 450 kg

Offer 25429 Technical data : - Load capacity 1 t - Crane attachment eye in the middle - Suspension height approx. 500 mm - 2 adjustable stop eyes adjustable 1000 to 2500 mm - Adjustable distance 150 mm - Truss cross-section W 100 x H 100 mm - Overall dimensions approx. L 2650 x W 170 x H 500 mm - Weight approx. 70 kg

weight max.: 32 t clamping width: 4000 mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 4 x 0,6 x 0,5 m Adjustable spreader beam for 32-tonne cranes - Central crane attachment point - Additional/alternative crane attachment points on the outer sides - 2 individually adjustable load attachment points Spreader beam length: 4000 mm Spreader beam width: 300 mm Weight: 980 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knuckle Boom Crane Available – National Oilwell Varco (NOV) High-quality offshore lifting equipment ready for deployment: Make: National Oilwell Varco (NOV) Crane Type: Knuckle Boom Crane Model: OC2599KCE-15-25(18) Manufactured: 2011 Condition: Excellent Origin: Removed from FPSO vessel Safe Working Load (SWL) & Radius: • 1 Fall: 7.5T 25.4m • 2 Fall: 15T 24.9m ⚖️ Weight: 47.1T (excluding pedestal) Location: Europe Ideal for offshore, marine, and heavy lifting operations.

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

189 pieces of lattice supports, 1 to. / Pallet space, for pallet racks 1.05m deep - new material - : Price per piece from location: 20.- € (net)! Only complete acceptance! Manufacturer: MantaMESH Type: MantaMESH Year of construction: 2024 Condition: very good Available: immediately Location: Paderborn ANSI MH 26.2 - 2017 compliant Performance independent of the rack beams Evenly Distributed Load (UDL) (kg) 1000 Allowable Deflection (mm) 6.4 Load given Structural Failure (kg) 2000 Properties ANSI MH 26.2 - 2017 compliant Made in Germany Pre-galvanized, hemmed beams SafeEDGE® on grilles and beams Grid has over 70% open area EU Design Registration No. 002435099-0003 Specifications Beam Type: Box 50, Box 50 Shelf depth (mm) 1050 Grid depth (mm) 1052 Grid width (mm) 879 Distance to top wire (mm) 25 Distance to subwire (mm) 100 Top wire Ø (mm) 4  ...

winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: about 250m -Item No.: 03120320 D17 x 250M -Price: complete -also other crane ropes: available -Transport dimension: Ø 700 x 600 mm -Weight: 420 kg

approx. 500m roller conveyor with accumulating 50 cm wide, powered - used-: Price for 10m from the site: only EUR1.099.-(net), dismantled and loaded! Price for 50m from the site: only EUR4.999.-(net), dismantled and loaded! A total of approx. 500m available (details upon receipt in the camp)! Manufacturer: Mannesmann (Siemens) Dematic AG Type: KR Year of construction: 2001 Motor: SEW Individual lengths: approx. 3 m,. Width: 50cm, Conveyor width: approx. 44 cm, Roller spacing: approx 8 cm. Optional accessories (photocells, scanner etc.) Condition: good Available: available now Location: Camp Bautzen

Properties: Used roller conveyor from the manufacturer Mannesmann / Dematic Condition: fully functional with traces of usage Ideal for fast material transport Specialist dismantled and packaged Drive: Round belt Incl. SEW motor 0.55 KW Stock 2 pieces Technical data: Dimensions of the roller conveyor Total length: 600mm Total width: 700mm Roll width: 610mm Roll diameter: 50mm Railway consists of 10 rollers Information on the framework Height: 165mm Width: 35mm Roller track The roller conveyor is ideal in the picking zone for interlocking machines or work places and to optimize the internal flow. During transport, the roller conveyor can feed sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and mach ...

Hydraulic pump MANNESMANN REXROTH 1PF2GU2-20/032REO07MU2 MO2 shaft Ø 32 mm Dimensions: 210 x 200 x 220 mm

Directional Control Valve, Hydraulic Valve MANNESMANN-REXROTH 4 WE 10 E31/CG24N9K4 588201/4 with 2 control solenoids GZ63-4 24V Dimensions: 295 x 115 x 75 mm

Pressure reducing valve, direct controlled, hydraulic valve MANNESMANN REXROTH ZDR 6 DP3-43/75YM 00410865 75 bar lockable ! Dimensions: 250 x 45 x 40 mm

Check valve, twin - Throttle check valve MANNESMANN REXROTH Z2FS 6-2-41/1QV Maximum pressure: 315 bar Opening pressure adjustable ! Dimensions: 155 x 45 x 40 mm

Key data: 500 KG, 2700 mm, 2350 mm

RACKING SYSTEM No. of Bay : 44 bays (PM AREA) 48 bays (FG 2 AREA) Frame Size : H 2,750mm x D 1,200mm Frame Type : 90mm x 70mm x 1.8mmthk Maximum Load per bay : 6,100kg @ max. height between beam interval level height of 2350mm Beam Length : 2700mm clear span Beam Type : BB85mm x 45mm x 1.5mmthk - 2700mmL Beam Loading Capacity : Every pair of beam is designed to take a uniformly distributed safe working load of 1000kg No. of Storage Beam Level : 1/2 beam level ( 2/3 pallet height ) Frame Spacer : 100mmL Pallet Size : 1200mm W (Fork entry) x 1200mm D x 900/2200mm H Pallet Weight : 500kg (max) Total Pallet Location : 456 nos. Accessories Column Protectors : 400mmH Frame Protectors : 600mmH x 1200mmL 600mmH x 2500mmL Wire Mesh Decking : 100mm x 50mm x 5.0mmthk c/w 3 pcs support bar