mae 压力机 二手 出售

Single column hydraulic press MAE type S63SZ SOMasch.Nr. 551277 year of construction approx. 1977Nominal compressive force 63 ton. Pressing force: 50 tons (Practically tested)Projection 320 mmTable surface 850 x 630 mmRam area 1050 x 500 mmRam stroke 500 mmInstallation height max. approx. 730 mmTable height above floor 970 mmTank capacity hydraulics 600 litersDrive power 15 kWNerg connection 380 volts, 50 Hz- Hydraulic drawing cushion under the table with holes through the table top- 2-hand control- Electrical control cabinet damagedSpace requirement L x

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Hydraulic cylinder: comes from a hydraulic press manufacturer MAE type HY-S63S pressing force 63 tons -Hydraulic cylinder: pressure piston stroke 690 mm -Piston rod: Ø 130 mm -Piston diameter: approx. 160 mm -Bolt circle: Ø 180 x 18 mm -Dimensions: Ø 270 x 1200 mm -Weight: 330 kg

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . t throat: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

pressure: 25 t throat: 250 mm stroke: 400 mm table surface area: 600x480 mm ram surface: Ø135 mm table height: 980 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:6 t stroke:1020 mm total power requirement:3,5 kW Can only adjust between tips Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

Maxi Maestro D.C Servo Drive 200 x 25/50

machine measurements: 2.000 x 1.300 x 1.800 mm machine weight: 1.500 kg power capacity: ca. 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 300 mm workpiece height: 230 mm table surface area: 1000 x 240 mm x-travel: 1000 mm y-travel: 270 mm z-travel: 350 mm grinding wheel diameter: 240 mm grinding spindle speed: 2180 U/min table speed -stepless-: 3 - 30 m/min total power requirement: 4,5 kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC gear rack grinding machine - Automatic grinding head - B-Axis Grinding head ca 20 gr swivel - ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) - Pendel opperation ( double table) - Dresser automatic - Table dresser

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine info: Year of construction: 02/2025 Capacity: 60kg Machine Weight: 360kg Production of tempered chocolate: 130kg/h Connection: 16A CEE plug Dimensions: Width 900mm, Depth 920mm, Height 1550mm Description: The Model MAESTRIA60 tempering and coating machine is designed for tempering and coating all types of chocolate. Thanks to its small dimensions, the tempering and enrobing machine is MAESTRIA60 particularly suitable for versatile use in confined spaces. Continuous temperature control by a screw with the help of a cooling unit ensures that the chocolate is always available at the right temperature, ready for use. The machine has a heated dosing device, which is controlled by a pneumatic three-way valve, so bars, chocolates and other products can be dosed directly into moulds. By equipping the machine with the appropriate coating attachment, all confectioner ...

Centrifugal fan REITZ type MAE 045-017030-00Fabr. No. 601438 year of construction 2017Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³Air inlet 300 mm (nozzle diameter in the base plate)Air outlet 345 x 345 mmEngine speed 2940 rpm. Motor power 18.5 kWNet connection 400 Volt 50 Hz- fan wheel with 8 fan blades- directly flanged drive motor- flange dimensions for air outlet 450 x 450 mm- stable metal housing made of 8 mm steelSpace requirement L x W x H 1930 x 1240 x 950 mmWeight

Sakurai Maestro 72 A Year of construction 2006

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor -Type: MAE 140 740-0140-140-007 -Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

Centrifugal fan REITZ type: MAE 031-007130-00Fabr. No. 601475 year of construction 2017Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³Air inlet 250 mm (nozzle diameter in the base plate)Air outlet 245 x 195 mmMotor speed 2915 rpm. Motor power 7.5 kWNetz connection 400 Volt 50 Hz- fan wheel with 9 fan blades- directly flanged drive motor- flange dimensions for air outlet 310 x 260 mm- stable metal housing made of 5 and 6 mm steelSpace requirement L x W x H 1390 x 1030 x 600

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...

SCM Morbidelli m90 3115 x 1320 mm Z180 Electrospindle HSK 63 9.5 kW - 13Hp Tool Changer FAST14 Tool Changer TRB11 Suction hood for electrospindle 3 - 4 axes Drilling unit RO. AX F23L Pressure booster in the Z-axis 6 "TV FLEX" work tables 1300 4 Device for loading aid H= 75 x1300 12 Fixed suction cup 145x145 mm H=75 mm 4 rotatable suction cups 145x50mm H75mm Laser device for positioning the Teat Pro-Space Guards SCM eye-M console with integrated PC Machine Operator Interface Software Maestro cnc Human-Machine Surface Software (HMI) Maestro Active "TECPAD" remote control with 7" touchscreen screen Vacuum pump capacity 90/108 m³/h

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas  ...

max. workpiece length: 6360 mm profile spindle: 1 Stück main drive: 13 kW Control: CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors --------------------------------------------------- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden style windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): --------------------------------------------------- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for Prisma T-S angle gearbox - BRC - W ...

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

Bellows for Mikron Fraesmaschine WF3 (WF3SA)X-axis The Baelge are with light optical maengels. Please specify for right or left side when ordering.

Machine Details Stock number 1105-03737 Machine type machining center - Universal Brand DMG DECKEL MAHO Type DMU 80 MONOBLOCK Year of construction 2006 Control type CNC Control MILLPLUS HEIDENHAIN Storage location FRANCE Country of origin Germany Delivery time immediately Freight Base EX WORK Technical details x-travel 980 mm y-travel 630 mm z-travel 610 mm Speed 12000 1/min Control MILLPLUS HEIDENHAIN Tool holder SK 40 Tool changing device 32 items. Spindle 28 / 19 kW Table load 650 kg Total power requirement 44 kVA Machine weight ca. 9 t Information 5-axis, simultaneous universal machining centre HEIDENHAIN MILL PLUS Table 1250 x 700 mm, integrated rotary table 700mm, controlled NC swivel milling head (B-axis) -30° / +91°, Electr. Handwheel Conveyor IKZ 20 BARS WITH NEW SPINDLE TIME MAERTZ 2022

Turnkey Sale Integrated and fully equipped Production Shop. Consists of: FOUNDRY 7 Ton Induction Furnace INDUCTOTHERM” 1750kW (2013) + 7 Ton Furnace RUSS” 1500kW 4-Strand Continuous Billet Caster TECHNICA GUSS” Loading System with Vibrating Screen ACETARC” EXTRUSION + RUN-OUT Billet Reheating Furnace COIM” Extrusion Press PRESEZZI” 1250Ton (2009) Saw OCN” LB200 (2009) Draw Bench Line OCN” 3 15.80 (2009) FORGING (4) Bar Saws ADIGE” CM50A (1x) + CM 601 (3x) (2) Induction Heaters CEFI” (HF3000 + HF4000) (3) Billet Furnaces (2) Hot Formers HATEBUR” AMP 20 800 Ton Stamping Press HYDROMEC” HF 800 (2011) with 3 Sub presses (2) 400 Ton Stamping Press HYDROMEC” HF 400 (2000 + 1997) (2) 360 Ton Stamping Presses HYDROMEC” HF 360 (2018+ 2011) (2) 360 Ton Stamping Presses MECOL” (2x) 100 Ton Trimming Press HYDROMEC” (2) 30 Ton Trimming Press ...

max. workpiece length: 3.800 mm profile spindle: 1 Stück main drive: 15 kW Control: Maestro active windoor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAE CONTROLS - C311R Resonance 58E0035-C Electronic Resonance Precision Instruments Auction-ID: A1-47049-175

Vibrating Bowl - Ref 6522 Manufacturer: MAE Model: VSZ 650 U Serial Number: 121 94 Overall dimensions: diameter 700 x height 1100 mm Bosch Speed Adjustment Example of a \"pipette dosing cap\" format in the photo Weight: 200 kg Power supply: 230 V / 50 Hz Incoterm: EXW Auction-ID: A1-47051-46

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 € : 490.49 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm : 835 mm : 0.37 kW : 0.12 kW : 3220 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested ...