hyundai wia 铣床 二手 出售

This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information.

This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.

This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information.

This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information.

This Hyundai Wia E200C lathe was manufactured in 2012. It features a working diameter of 550 mm, a maximum workpiece length of 300 mm, and a hole through the spindle of 65 mm. With a spindle power of 15/11 kW and a speed of 4000 rpm, the Hyundai Wia E200C machine we have for sale is a robust choice for precision machining. Contact us for further details regarding this lathe.

This Hyundai Wia L210LA was manufactured in 2013. It features a spindle speed of 4000 rpm, X travel of 210mm, Z travel of 550mm, a maximum turning diameter of 350mm, and a maximum turning length of 530mm. It includes a chip conveyor. Consider the opportunity to buy this Hyundai Wia L210LA horizontal turning machine. Contact us for more information.

This 3s Hyundai Wia I-cut 380MD vertical machining centre was manufactured in 2012. It features a maximum spindle speed of 24,000 rpm and a spindle power of 10.5 kW, providing efficient machining capabilities. The working area includes a 520 mm X-axis and a 480 mm Z-axis, making it suitable for various applications. Consider the opportunity to buy this Hyundai Wia I-cut 380MD vertical machining centre. Contact us for further details.

This Hyundai Wia SE2200LMSC Lathe was manufactured in the year 2021 in Korea and has 3316 production hours, of which 538 are spindle hours. It is equipped with a Hyundai Fanuc i Series Smart Plus control unit. The machine has a spindle speed of 3500 rpm.

This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm.

This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a through-spindle coolant capability and a chip conveyor. The technical documentation and electrical schematics are available.

This Hyundai Wia L230LA was manufactured in 2018. It features X-axis travel of 220 mm, Z-axis travel of 560 mm, a swing over the bed of 600 mm, and a swing over the carriage of 355 mm. Spindle speed reaches up to 4000 RPM. Two units available. Contact us for more information.

For sale is a Hyundai twin turret CNC lathe LM 1600 TTSY from 2023 with 1565 operating hours and 506 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Multitasking is possible with the addition of a Y-axis to the upper turret (TTSY specifications)., - Integrated machining through synchronized control of main and counter spindles, - Design with hybrid guides: Combination of box guide (XY axis) and roller guide (Z axis), (Series LM1600/1800TT), Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB/Y) 65/195/700/720/700/100 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB/Y) 20/20/4 ...

For sale is a Hyundai twin-turret CNC lathe LM 1600 TTMS from 2023 with 1407 operating hours., and 343 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Integrated machining through synchronized control of main and counter spindles, Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min, - Lead type LM, - Number of tools: 2 x 12 pieces, - Tool size 20/32 mm, - Milling spindle speed 5,000 rpm, Subject to prior sale, changes and errors!

swing dia.: 600 mm turning diameter: 310 mm turning diameter over slide: 355 mm spindle bore: 53 mm bar capacity: 45 mm turning speed range: 6000 U/min turning length: 388 mm travel -z axis: 400 mm travel -x axis: 220 mm turret (x-stations): 12 control: SIEMENS 828D (Touch) c-axis: 0,001° 0 total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: LTH 3,7 x 2,0 x 2,0 m Includes preparation for automation (loading robot) Year of manufacture: 11/2017, delivery: 2018 - Automatic door - 12-station tool turret, driven at 5,000 rpm - Workpiece catcher - RENISHAW touch probe, automatically retractable - Tailstock - Chip conveyor - Coolant pump Accessories: Including collet chuck Including 2 x driven tool holders (radial + axial) Including 9 x fixed tool holders Including USB & LAN interface Including manuals The data for this ad was created with ModulMWS ...

CONTROLS   CNC controls FANUC 32I-MODEL B - MANUAL GUIDE I BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes WORKING RANGE TURNING   turning diameter (max): 530 mm   bar diameter (max): 117 mm   worpiece length max.: 500 mm MAIN SPINDLE   spindle revolutions (max): 2000 /min   drive power: 37 kW   spindle torque: 3073 Nm X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 4000 /min   - drive power: 7.5 kW ATTACHMENTS (TURNING)   chip conveyor: yes • Programmable tailstock MK#5• Main spindle with 2-stage gearbox• Tooleye• Chip conveyor• High-pressure pump, 20 bar• 3-jaw chuck, diameter 380 mm• Tool breaka ...

spindle diameter: 135 mm x travel: 3000 mm y travel: 2000 mm - Z-axis travel: 1600 mm travel -w axis: 700 mm TABLE: table-size: 2000 x 1800 mm table load: 10 t B-axis (table): 0,001 ° MILLING SPINDLE / HEAD: - spindle revolutions (max): 5 - 2000 U/min - spindle diameter: 135 mm - tool fixture: ISO SK 50: BT 50 TOOL MAGAZINE: - number of positions: 40 feed: 1 - 4000 mm/min rapid traverse: 8 m/min control: Fanuc 16i-MB total power requirement: 42 kVA weight of the machine ca.: 37,2 t dimensions of the machine ca.: 6,3 x 6,9 x 4,79 m equipped with: - CNC Control Fanuc 16i-MB - NC-Rotary Table 1800x2000mm - ATC 40-fold (BT 50) - COOLANT THROUGH THE MAIN AXIS - Chip Conveyor - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HYUNDAI WIA SE 2200 LMSA CNC Lathe GENERAL Project No.: 905806 Quantity: 1 pcs. Manufacturer: HYUNDAI Type: WIA SE 2200 LMSA Control: HYUNDAI WIA Fanuc i-Series Year of Make: 2021 Condition: Used machine Spindle in approx (hrs): 2149 Program run approx. (hrs.): 4106 Approx. (hrs): 8655 DESCRIPTION TURN Max. turning diameter 300 mm Max. turning length 508 mm Max. circumferential diameter over bed 600 mm Max. chuck diameter 210/125 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 15/11 kW Spindle aperture main spindle 65 mm Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Max. speed sub-spindle 6000 1/min Max. power sub-spindle at ED 10-40/100% 7.5/3.7 kW Spindle Diffuser Sub-Spindle 32 mm Axes on the sub-spindle unit C/Z Blowing air through the sub-spindle Workpiece ejector in the sub-spind ...

This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information.

This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine.

This 3-axis Hyundai Wia HD2600Y horizontal turning machine was manufactured in 2025. It features a swing over the bed of Ø820 mm, a maximum turning diameter of Ø300 mm, and a turning length of 610 mm. The spindle supports up to 3,500 rpm with a motor power of 18.5 kW. It includes a 12-tool turret and a milling tool speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD2600Y horizontal turning machine. Contact us for more information.

This Hyundai Wia L300C was manufactured in 2025. It features a swing over the bed of Ø750 mm, a maximum turning diameter of Ø500 mm, and a turning length of 720 mm. The spindle supports a bar capacity of Ø90 mm and operates at speeds up to 3000 rpm. Ideal for precision turning with its robust 12-tool turret and rapid traverse rates. Consider the opportunity to buy this Hyundai Wia L300C horizontal turning machine. Contact us for more information.

This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information.

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

This Hyundai WIA SE 2200 LM was manufactured in 2025. It features a maximum turning diameter of Ø300 mm and a length of 529 mm, with a spindle speed of up to 6,000 rpm. The machine includes a 12-tool turret and supports milling with a tool speed also up to 6,000 rpm. Ideal for precision turning and milling tasks. Contact us for more information about this machine.

This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025, featuring a maximum turning diameter of Ø230 mm and length of 673 mm. It boasts a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, dual 12-tool turrets, and rapid traverse rates ensuring efficient operations. Ideal for complex turning tasks. Contact us for more information about this machine.

A lightly used Hyundai CNC turning machine is available. Turning diameter: 560mm, turning length: 2100mm, main spindle power: 30kW, spindle speed: 2000rpm, tool turret: Hyundai BMT 75, tool stations: 12, tool holders: 8, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 3750mm/2250mm/2300mm, weight: approx. 9000kg, control: Fanuc 32i, operating hours: 230h, power-on hours: approx. 1450h. Including tool measurement, power chuck Samchully HCH-15 (381mm), 6 sets of soft jaws, 1 set of hard jaws, steady rest SMV SLU-B and hinge belt conveyor. Documentation available. On-site inspection is possible.

- Tool measuring probe RENISHAW TS-23R - Rapid Traverse (X x Y x Z): 36 / 36 / 36 mm/min - Spindle taper: BBT40 - Travel (X x Y x Z): 1.000 x 560 x 600 mm - Number of tool stations: 30 (automatic) - Control: HW F i Series - Max. spindle speed: 12

Used machine in good condition. Available for immediate delivery. - Spindle taper: BBT40 - Max. tool length: 300 - Number of tool stations: 30 - Spindle power : 18.5/11 kW - Rapid Traverse (X x Y x Z): 36 x 36 x 36 mm/min - Travel (X x Y x Z): 900 x 460 x 520 mm - Control: FANUC - Max. workpiece weight: 600 kg - Max. spindle speed: 12.000 rpm - Max. tool diameter: 80 mm - Chip extractor: YES - Internal cooling: YES - High pressure pump: 20 Bar - Axes: 3 - Dimensions (long x wide x high): 2.805 x 2.180 x 3.026 mm - Weight: 5.500

2001 & 2002 HYUNDAI HIT 15 2X HYUNDAI HIT 15 turning machines equipped with QUICK LOAD portal and two stockers (loading and unloading) Both machines are currently working. Ordinary maintenance can be proved by invoices. Turning machine G1 Hyundai HIT-15 (single spindle with tailstock, no axis C) Year of manufacture: 2001 Turning machine G2 Hyundai HIT-15 (single spindle with tailstock, no axis C) Year of manufacture: 2002 Quick Load portal Year: 2003 Find more here - / Contact us at -

Hilco Industrial is the selected partner by Hyundai RB to facilitate the sale of new LSAW Welded Pipe complete production lines as well as individual machinery, designed and manufactured by Hyundai RB (South Korea). Based on excellent production capacity achieved over more than 25 years’ experience, Hyundai RB developed its own S.A.W. pipe production lines featuring JCO Press Bending. LSAW Welded Pipe Production Line Main Equipment and features: Shot Blasting – Max 6m/min x width 4,800 Edge milling – Φ800 cutter type x 130kw – Quick tool changing – Max. milling speed: 6m/min. – Automatic calculation of number of milling – Automatic width checking Edge-Bending (Pre-Bending) – 1,500 ton/8t ~60t/6~13.5m – Quick size changing – Max. bending thick.: 60mm JCO Press Bending – 6,000/8,000/10,000 ton (max.13.5M) – PLC with CNC (Recipe memory)  ...

Manufactured Year: 2014 Engine Manufacturer: Hyundai Himsen Model Number: 9H 25/33 Alternator Manufacturer: Hyundai ESS Model Number: HRS7 637-8P Condition: New, Not Operated Fuel Type: Diesel/HFO/MDO Power Output: 2100 kWe Engine Speed: 750 rpm Frequency : 50 Hz Voltage Output: 6000 V Sale Includes: Engine and Alternator along with control panel for each generator and engine components ( such as built in pumps, turbo charger and other engine parts and supports)

STEAM TURBINE with GENERATOR SET never Installed, Unused in Boxes. Mfg. ELLIOTT, Model 2 DYR6 Multi-Stage Steam Turbine, with HYUNDAI IDEAL ELECTRIC Brushless Synchronous Generator Output 6.595kW; Speed 1800RPM; 6600 Volt; 60 Cycle Year of Mfg 2016, Never installed, unused in boxes with Spare Parts. MULTI-STAGE STEAM TURBINE ELLIOTT”. Model 2DYR6 Shop Order No. F502704; Go. No. F15040 (2016) Operating Speed (based on Generator Output) 710 RPM Allowed Speed Max. 5460 Min. 5286 RPM Trip Speed 6006 RPM Max. Steam Inlet Temp. 400 C. Max. Steam Pressure 44.0kg/CM2G Exhaust Pressure 220 kg/CM2G Potential Max. Power 7257 kW Max. Nozzle Steam Flow 45.080 kg/hr Weight 19.028 kg BRUSHLESS SYNCHRONOUS GENERATOR HYUNDAI-IDEAL ELECTRIC” Output 6.595 kW-4P- 6600 Volt; 60 Hz. Weight 20.000 kg With Start-Up and 2 Year Spare Parts

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information.

This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information.

This 3-axis Hyundai SPT-V30TD was manufactured in 2001. It features a spindle speed of 8,000 rpm, table dimensions of 600 x 380 mm, and a maximum table load of 200 kg. Ideal for milling applications, it offers X, Y, and Z travels of 500 mm, 300 mm, and 300 mm respectively. Consider the opportunity to buy this Hyundai SPT-V30TD vertical machining centre. Contact us for more information about this machine.

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

Inv. Num. : 6203 Type: E160A Producer: Hyundai Generated: 2018 Parameters: Control system: FANUC i-series Operating hours: 5042 h Switch-on hours: 2531 h Maximum turning length: 300 mm turning diameter: 280 mm Maximum length travel in the X-axis: 165 mm Maximum feed in the Z-axis: 330 mm Maximum main spindle power: 11 kW Maximum spindle speed: 6000 1/min Equipment: Bar feeder Autobar (diameter 65 mm/length 1 meter/year 2018) C-axis Conveyor Tool holder Chuck CNC tailstock Tools

Ref. -No.: 10196 Manufacturer: HYUNDAI Year of construction: 2008 Storage location: Halberstadt Country of origin: Südkorea serial number: HB5-0156-440

Hyundai HX40 Electric Forklift Year of construction 2016 Read operating hours approx. 9600 Triplex mast lifting height 5020mm Sideshift fork length 1200mm Weight 5165kg without battery Battery max. 2435kg Actual condition, ready for use, without valid FEM 4.004 (UVV) acceptance Loading onto a normal truck without a ramp by forklift no problem The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Key data: 60 KW, 75 kVA, 400 V

ON HAND 30 months warranty WEG Alternator DEIF Module Generator Set Specifications: Model No.: EQ-H7560 Emergency power output: 75 kVA / 60 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine manufacturer: Hyundai Engine Model: SP344CC Charging: Turbocharging & Intercooler Fuel System: Series Injection Regulator Type: Mechanical Generator set dimensions (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1140 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank integrated into the chassis Industrial Silencer Electronic Battery Charger Elect ...

feed pressure: 8 bar Effective free air delivery: 125/85 L/min Receiver capacity: 24 / 8 l / bar weight of the machine ca.: 22,5 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 600 x 310 x 510 mm Exhibition machine This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 12 l engine output: 7,0 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2035; Engine: Hyundai P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

Key data: 176 KW, 220 kVA, 230 V

Generator Set Specifications: Model No.: EQ-H22060 Emergency power output: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP054CC Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250SI10AI Generator dimensions (closed): Length: 3300 mm Width: 1220 mm Height: 2000 mm Weight open: 2250 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250SI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed in the chassis Silencer in industrial d ...

; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090

; Gross weight [kg]: 2364; Engine: Hyundai P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

Key data: 222 KW, 277 kVA, 230 V

Generator Set Specifications: Model: EQ-H277222 Standby Rating: 277 kVA / 222 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Brand: Hyundai Engine Model: DP086CC Aspiration: Turbocharged & Aftercooler Fuel System: Inline Governor Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250SI20AI Generator Set Dimensions (Closed): Length: 3500 mm Width: 1250 mm Height: 2100 mm Weight Open: 2600 kg Standard Features: 4 Stroke, 1500 RPM, water cooled heavy duty diesel engine WEG Alternator (Model: AG10-250SI20AI) ABB Circuit Breaker Protection system on Manual run Flexible oil pipes and oil draining valve Pre-heater Lubrication oil and anti-freeze Batteries and cables Electrostatic paint coated, steel, welded chassis Fuel tank housed in the chassis Industrial type silenc ...

Key data: 244 KW, 305 kVA, 230 V

30 months warranty Can be fitted with a Stamford/Leroy Somer/WEG alternator Can be equipped with a ComAp/DEIF/DSE controller Set Specifications: Model No.: EQ-H305 Primary power: 305 kVA / 244 kW Emergency power output: 335 kVA / 268 kW Voltage: 230V/400V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP086CE Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Generator dimensions (closed): Length: 1300 mm Width: 3800 mm Height: 1850 mm Weight open: 2755 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tan ...

Key data: 268 KW, 335 kVA, 230 V

Produced in the EU 30 months warranty Generator Set Specifications: Model: EQ-H335268 Emergency power output: 335 kVA / 268 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP086CE Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250MI10AI Generator dimensions (closed): Length: 3800 mm Width: 1300 mm Height: 2200 mm Weight open: 2950 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250MI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed ...

; Gross weight [kg]: 5500; Engine: Hyundai DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 900

; Gross weight [kg]: 5650; Engine: Hyundai DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

Key data: 294 mm, 481 mm, 3000 1/min

Stock number: 4005 CNC LATHE Manufacturer: Hyundai, Type: Hit-20M Machine NO.: 34508002, Specifications: Max. circumferential diameter 294 mm dia. Turning length 481 mm Main motor power 18.5/14 kw Main spindle speed range 40-4000 rpm Drilling through drawing tube 70 mm dia. C Axes Tool turret with 12 stations Powered tools. 30-3000 rpm Control Siemens Fabr. Accessories: Hydraulic Main Center Chuck Kitagawa B 210 - 250 mm mm dia. Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 7 pc Cooling water system. Tailstock Length: 3000 mm, Height: 1800 mm, Width: 1750 mm, Weight: 4380 kg

4 GENSET UNUSED X 6L27/38 MAN HYUNDAI – POT 2.111 KVA

NEW ENGINE BOW THRUSTER MOTOR HYUNDAI NEW,

Key data: 254 mm, 500 mm, 3600 1/min

Stock No.: 3967 CNC LATHE Manuf.: HYUNDAI, Type: HIT 18S Serial No.: 34156066, Build: 1998 Specifications: Max. Turning diameter 254 mm dia. Turning Length 500 mm Main motor power 15 kw Main Spindle speed Range 3600 rpm Spindle bore 75 mm dia. X Axis Stroke 180 mm Z Axis Stroke 510 mm Turret 1 with 8 Stations Control system Siemens 840C manuf. Controlled in X-Z axis Accessories: Hydr. Chuck Mainspindle mm dia Various toolposts. Chip conveyor. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

rated capacity: 2,6/2,8 KW frequency: 50 Hz output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 15 l weight of the machine ca.: 48 Kg dimensions of the machine ca.: 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet, only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 1.060 x 510 x 635 mm - Control: SIEMENS 828D - Working area (X x Y x Z): 1.200 x 500 mm - Max. workpiece weight: 800 kg - Max. spindle speed: 8.000 rpm - Spindle type: BT 40 - Dimensions (long x wide x high): 2.910 x 2.690 x 2.815 mm - Weight: 7.500

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

with Kitagawa 4th axis X-axis: 1060 mm Y-axis: 510 mm Z-axis: 635 mm Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Control : Fanuc Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 8000 rpm Length: 3000 mm Depth: 2400 mm Height: 2800 mm Weight: 7 ton

Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.

Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible.

- Spindle speed 10.000 Rpm - Coolant tank with IKZ 20 bar - Chip conveyor

Key data: 590 mm, 750 mm, 3000 1/min

Turning length: 750 mm Turning diameter: 590 mm over bed / 375 mm over cross slide Spindle speeds: 25 - 3,000 rpm Spindle bore: 78 mm Turret: 10 Pockets Control: Siemens 810D Shopmill Equipped with: - Double foot pedal -Conveyor -Operating instructions Country of origin: Z. Korea Motor power 25 kW Machine weight: 6,000 kg Machine LxWxH: 300 x 180 x 190 cm

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1130

Travel X/Z: 180mm/510mm, max. turning length: 500mm, max. turning diameter over bed/face slide: 440mm/254mm, spindle speed: 3600rpm, bore: 70mm, tool stations: 8, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/1800mm, weight: approx. 4300kg, controls: Siemens Sinumerik. Including collet and jaw chuck. Documentation available. On-site inspection is possible. Expected to be available from April 2026.

LINERS CYLINDER HEADS CONROD ROD PISTONS FUEL UNIT CRANKSHAFT CAMSHAFT BEARINGS All parts new, unused P

- Twin spindle construction - Twin turret configuration with Y Axis  - (Y-Axis Cutting complex shaped work piece) - Build in Spindle motor - High Rigidity BMT Turret - Full C-Axis 360.000  - Slant bed construction 45 Gr -  Please note Pictures is example not orginal picture !

FI-FI PUMP MOTOR 60HZ 690 VOLT SIZE 450 , MARINE CERTIFICATE

turning diameter:1600 mm turning length:3000 mm centre height:800 mm turning diameter over bed:1600 mm turning diameter over bed slide:1400 mm turning dia. over face-slide:1200 mm max. workpiece weight between centers:20 to speeds:5,6 -800 1/min transmission ratio:3 spindle bore:112 mm turret (x-stations):8 / VDI 60 travel -x axis:850 mm travel -z axis:3020 mm rapid power traverse in X-and Z direction:6 / 10 m/min power maindrive:46 kW weight of the machine ca.:22 to. dimensions of the machine ca.:7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

Hyundai Steel Dangjin Facility (widely known as "Thin Plate Mill") is a premier steel production plant featuring a Compact Strip Process (CSP) as the main production line, complemented by a 150-tonne heat-size electric Meltshop, a thick Slab Caster, and two Skin Pass Mills. Initially commissioned by Hanbo Steel in 1995, this facility was acquired by Hyundai Steel in 2004 including a major modernization in 2011 and more recent upgrades, ensuring its continued excellence in production. Assets Available for Sale: • Electric Meltshop 150 tonnes heat size – DC EBT Electric Arc Furnace, Ladle Furnace, Vacuum Degasser and associated equipment. • CSP – A Thin Slab Cast & Rolling line combining casting, heating, and rolling. 55mm thickness slabs directly enter a tunnel furnace and are rolled in a Hot Strip Mill for final strip thickness from 1.4 to 16mm and up to 1,560mm width ...

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

6500ton Open Die Forging Press HJ / Seonam (Korea) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons Up-setting force (static working pressure of 420 bar): 6500 Tons Daylight: 5,200 mm Stroke of Movable cross head: 2,700 mm Main Ram dia. (Center cylinder): 1 set - ￠950 mm Side Ram dia. (Side cylinder): 2 sets - ￠750 mm Return cylinder Ram dia: 2 sets - ￠300 mm Moving Table Width: 2,600×Length 6,600 mm Moving Table stroke (center to both side 2,750mm): 5,500 mm Approaching speed: 300 mm/sec Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec Return speed: 270 mm/sec Hydraulic Main pump: 12 sets  ...

Hydraulic excavator chain excavator crawler excavator Manufacturer: Hyundai Type: ROBEX 280 LC Built ca.1999 6 cylinder four-stroke diesel engine Engine model: Cummins 6BT 5.9 / 128 hp Chassis length approx.: 4900 mm Cab height approx.: 3000 mm Chassis width: 3400 mm extra width quarry bog chain, chain width approx.: 810 mm Weight about 30 tons. Deep Spoon Oscar Meier AG Type ASM 100 Pinion repaired from the rotary gearbox and seals of rotary entry.

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Hyundai RB Onsan Factory, located at Ulsan in South Korea produces welded pipes by means of LSAW – Longitudinal Submerged Arc Welding process. The line is offered complete, featuring advanced HAEUSLER (Switzerland) core equipment. This facility is capable of producing welded pipes with the following specifications: Diameter: 22 to 80 inches Thickness: 6.4 to 25.4 mm Length: 6,000 to 12,200 mm The production line is equipped with a comprehensive suite of machinery altogether ensuring seamless and efficient production of LSAW pipes, including: • Plate edge milling • 3-roll bending • Post bending • Tack welding • Inside welding • Outside welding • Copander • End facing • Pipe inside washing • Hydrostatic tester • X-ray • Semi-correction • Pipe roll conveyor with skid system

AUTEL ADAS MaxiSYS MA 600 Mobil Full Kit Manufacturer: AUTEL (autel.com) MA600 ADAS Calibration System with Mobile Calibration Frame and Diagnostic Systems Procurement according to invoice: May 2024 Condition: Very good Autel's MA600 portable, mobile ADAS calibration system includes a collapsible aluminum calibration frame, various line, centering, and alignment lasers, laser-assisted reflectors, and a lane departure assistant calibration target (LDW) for vehicle camera system calibration. The MA600 is compatible with almost any diagnostic tablet. AUTEL ADAS MA 600 Mobil Full Kit according to the invoice of May 2024 consisting of (see pictures for details) : - Autel MA 600 FULLKIT with mobile calibration frame - Autel MA 600 BAG (bags for mobile calibration frames) - Autel reflector CSC0602/01 with mirrors and case - Autel mounting plate MA 600 RAP - Autel ITS 600 with ...