hesse by beka mak 锯床 二手 出售

Cone cutter Makita, type 5500 S in a fit state. Volts 220 volts motor power 1400 Watt speed of 1650/2200 lateral adjustment range 45/20 mm clamping range Max (Hxw) 240 x 210 mm trunnion strengths 0 mm to 130 mm PIN length an average 90 mm

Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...

MAKA

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

Vibrating chisel chiseling machine Manufacturer: MAKA Model: STV 71 Horizontal chiseling unit

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Manufacturer: Maka, Type: STV 71, Year: ca. 1980, Control: hand, Work stations: 1, Horizontal moulding unit: 1, Motor kW: 3, Clamping hight max. mm: 120, Trench deepth max mm: 130, Lifting device: yes, Year :ca. 1980

Manufacturer: Makor, Work piece width min-max mm: 10-225, Min.-max. workpiece length in mm: 300-4800, Min.-max. workpiece height in mm: 110, Vorschub m/min-max/min: 20-60, Laquer circles: 2, Dry exhauster: yes, Spraying heads - total: 4, Working width mm: 300, work piece detection: yes, Conveyour system: Band und Stange, Feeding belt mm: 1500, Brush: 4 Büsten köpfe, Longitudinal feeding: yes, Freitext: Leistenhochtrockner Länge 5500 mm /VA Ausführung Spritzmaschine,

Manufacturer: Makor, Type: Kronos, Year: 2009, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, work piece cleaning: yes, Conveyour system: Band, Laquer recharging: yes, by rollers: yes, Feeding speed m/min: 1,5 - 10, Wight approx. kg: 4500, Year :2009

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

Joining unit with 2 joining motors of 1.5 kw each 12000 rpm Roll stock scissors of 0.8-2 mm Glue tray with glue roller for 3 kg  Spare tray for 3 kg (colour change) 3 rollers of printing unit Feed speed 13 m/min Preheating lamp  Rounding milling at the top and bottom  Corner copy rear front Edge Scraper  Spray agent before buffing Buffing unit - Rolls 0.4-2 mm - Panel thickness 15-50 mm - Min. plate 70 x 200 mm - Plc control touch screen - Roller bearings up to D 550 mm - Operating pressure 6 bar - Ce version  - Machine dimensions 390 x 70 x 150 cm

CNC machining center MAKA Type SC 20 T Tandem table version Year of construction 2000 3-axis machining Workpiece cube dimension Maximum length 1500 mm Maximum width 1500 mm (per table) Maximum height 240 mm Maximum travel distances approx. X 4300 mm x Y 2500 mm x Z 400 mm -Milling unit 2 ISO 40 milling motor Water-cooled power maximum 8/11 kW Tool holder SK40 -Tool magazine consisting of 2 chain tool changers Number of places 16 each Tool holder ISO 40 -Surface grid table in tandem version with extension stroke for safe loading Workpiece clamping via vacuum -CNC control type bwo 900C, 512 KB RAM, PC -Operating voltage 400V / 50 Hz Installed power approx. 34 kW, connection fuse 80A Operating pressure 6 bar Machine weight approx. 8000 kg

Holzprofi Maker PS315F-2000 sliding table saw with smooth sliding carriage and large outrigger table, pivoting circular saw blade, and finely adjustable crosscut stop. Space-saving thanks to the easily removable outrigger table. Scoring tool, miter stop, and eccentric clamp included as standard. New: Preparation for grooving cutter. Technical data: Main engine power S1 3,8 kW Voltage 400 V Saw blade tilting 45° Sliding table 2000 x 267mm Cutting length 2300 mm Saw blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Speed saw blade 4500 RPM Speed scoring saw blade 8500 RPM Extraction connection 100 mm Groove cutter thickness (optional) 6-22.5 mm Groove cutter bore (optional) 30 mm Weight 284 kg Optional equipment: with 2600mm format table, Driving device FE-MW-1

The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Optional accessories: moving device

Professional Holzprofi Maker edge belt sander with pivoting grinding device up to 90°, height adjustable cast iron table, mitre gauge adjustable at both sides, graphit band rest, rubberized grinding cylinder, cast iron table for round grinding is included in the price. Technical Data: Engine power 2,2 kW Grinding cylinder support Ø 38, 50, 76 mm Voltage 400V Table length 900 mm Table width 300 mm Table height adjustable ca. 905 - 1027 mm Band length 2770 mm Belt speed 16m/sec Weight 225kg

Holzprofi Maker oscillating edge belt sander, a solid sanding machine for craft and business Technical data: Band dimensions 2260 x 150 mm Engine power S1: 2,2 KW , 400 V Table length 750 mm Tabhle width 250 mm Belt speed 16 m/sec Space required 1325 x 570 mm Extraction connection 100 mm Weight 156 kg

The new cylinder brushing and grinding machine from Holzprofi Maker can be quickly and easily converted from a grinding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and features: - A wide range of surface treatment options - Easy and quick conversion from grinding to brushing - Many different brushes available for a variety of effects and editing options - Infinitely variable feed and roller speed for perfect results - Workpiece width up to approx. 1100mm - Precise adjustment of the grinding height for consistent results Technical data: Grinding width: 560 mm (1120 mm) Grinding height: 3 to 75 mm Roll diameter: Ø132mm Table dimensions: 592x530mm Dimensions of the table extensions (2x): 582x245mm Roll speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min ØSuction connection: 100mm Engin ...

The new professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. The tailstock has quick adjustment, the headstock has a hollow spindle with Mk 2 mount also in the tailstock. 36 pitch with latching. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 1000 mm Center height 254 mm Tail stock thread M33 Din 800 Motor power 2,25 kW, S1 Speeds variable 100-1350 100-3550 rpm Voltage 230 V Weight 240 kg Optional: Outturning extension (increases the center height by approx. 220 mm or lengthens the center distance by approx. 460 mm)

The new small professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 640 mm Dist between centers with opt. extension 1120 mm Center height 204 mm Tail stock thread M33 Din 800 Motor power 2,2 kW, S6 Speeds variable 100-1200 100-3200 rpm Voltage 230 V Weight 135 kg

Holzprofi Maker cyclone extractor with double chip filtering. The first dedusting is working via a cyclone, the second dedusting via a filter patrone. Including remote control. Technical data: Standard volume flow 1350 m³/h Filter surface 2,6 m² Vacuum V/min 2000 Pa Suction socket 150 mm Branch 150/100/100/100 Motor rated power 1,5 kW 400V Chip collection volume 160 Liter Weight 89 kg

The new Holzprofi Maker lifting work table supports the ergonomic loading and unloading of goods on pallets or similar means of transport. The diverse functionality increases productivity in the long term and optimizes work processes in your company. Heavy and stable design. Hydraulic lift for easy foot operation. Advantages and features: - The work table is characterized by high stability and easy mobility - Easy height adjustment using a hydraulic foot pedal - Robust construction and yet mobile thanks to maneuverable castors - The robust castors, the smooth-running foot hydraulics and the extremely durable worktop ensure stability, maneuverability and a comfortable working height. - Versatile, storage aid, stacking trolley and additional work table in one - MDF perforated grid plate as standard with 20mm hole size and 80 x 80mm grid - The HUB-350MDF-Schwenk model is also available with ...

This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine.

Carriage length: 3000 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cut depth: 125 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 3200 / 4000 / 6000; Motor power: 5.5 kW; Engine brake: yes / automatic; Suction connection: 80 mm and 125 mm; Machine length: 3400 mm; Machine width:

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 250 kg; Solid slotted hole drill with a lever operation.