elumatec 钻床，镗床 二手 出售

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Key data: 180 mm, 300 mm, 60 mm

Two-spindle copy milling machine, Elumatec KF 78 / 60 Used & Functional For machining aluminium or steel profiles E.g. window construction With vertical and horizontal milling motor, spraying device and pneumatic clamping device Specifications: Profile height: 60 mm max Milling area horizontal: 180 x 70 mm Milling area vertical: 300 95 mm Stroke: 110 mm Bore speed: 6000 rpm Milling speed: 12000 rpm Air consumption per cycle: 12l Drive power: 740/800w Installation dimensions: (HxWxD) 160 x 280 x 110 Weight approx. 270kg

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg

Key data: 7300 mm, 1000 mm, 650 mm

- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Manufacturer: Elumatec Type: SLK118/00 Year of Manufacture: September 2008 Type of Machine: CNC Profile Milling Machine (Template-Free Copy Milling Machine) Find more here - / Contact us at -

Lenght 6 m E355 positioner controller Saw diameter 420 mm

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device

Automatic feed via E555 control with Windows operating system For mounting on any Elumatec single-head saw (right) Max. feed length: 6,000 mm

Elumatec circular saw

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with new computer in 2023 Speed infinitely variable up to 24,000 rpm Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material tensioners Spindle in very good condition, spindle pull-in force: 12.5 kN Protective fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg

Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min

A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 3,100 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 Operating System Minimum Quantity Spraying Tensioner detection and automatic displacement 6 pneumatic material clamps 2 material stops Loading is included in the price

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Pendulum operation through two light barrier areas Manual control panel Loading is included in the price Weight: approx. 8,500 kg

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

Key data: 380 mm

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

3-axis machining centre with automatic tool changer for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed infinitely variable up to 21,000 rpm Manual control unit Minimum quantity spraying Automatic tool change with magazine (4 places plus angle head) Tensioner detection and clamp displacement 4 pneumatic material clamps light barrier Weight: approx. 2,000 kg

Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm

Offer 26004 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 1800 kg - with: - Control ELUMATEC E 355 - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - separate control cabinet, - Cycle spraying device

A glass glazing bead saw Elumatec is available. Saw blade diameter: 400mm, max. speed: 3800rpm, machine dimensions X/Y/Z: approx. 1250mm/650mm/800mm, weight: approx. 250kg. Including roller conveyors. Dokumentation vorhanden. An on site inspection is possible.

Key data: 3850 mm, 350 mm, 280 mm

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB ports Speed infinitely variable up to 22,000 rpm Boc Hqjyqyaqoa R H Towi Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 light barrier areas and 2 material stops, thus pendulum operation possible A total of 8 material tensioners Spindle in good condition, spindle pull-in force: 12 kN Weight: approx. 2,000 kg

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms

Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

double-head mitre saw Type: DG 104 Manufacturer: Elumatec Year: 2018 Engine power: 2 x 1.5 kW Voltage: 400 V, 50 Hz, 3~ Suction nozzle on the machine: 80/100 mm Extraction nozzle: 140 mm Suction power: 1,600 m3/h Sawdust container: 0.08 m2 Accessories supplied with the machine: 2 branches 140/100/80 mm 300 mm - length 4 antistatic PVC hose 2 elbow 90° 2 connection socket 100 mm Roller track 1.5 m mobile, width 400 mm Connecting plate of the roller track Timing device for E 580. Semi-automatic cutting progress. Module with a light barrier for automatic cutting. Protective fencing on the left and right PC control E 580/1 1-axis control using the industrial PC E580/1 for positioning the length of the cut system for measuring absolute lengths independent of the drive pneumatic locking in position ergonomic layout of the operator´s control unit industrial PC with 12 ...

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device

This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details.

3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Max. cutting length: 4,500 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via program control Motorized adjustment for swivelling on both sawing units, allowing angles between 45 and 90 degrees to be directly controlled New network-compatible control system in 2019 Minimum quantity spraying device Weight: approx. 2200 kg

A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display E111 Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation Machine is dismantled on squared timber

Key data: 420 mm

Saw blade diameter: 420 mm Cutting length: 3,000 mm Automatic length positioning and angle adjustment via E 255 control Digital angle displays on both units Rollable and fixed material support Minimum quantity spraying device Weight: approx. 1500 kg

Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine.

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.

Drilling machine manufactured in 1996. This Auerbach FBE 1200 features a Huron head and is equipped with a Heidenhain TNC 360 control system. With a working envelope of 1200 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis, consider the opportunity to buy this Auerbach FBE 1200 drilling machine. Contact us for further details.

This 3-axis AGIE Drill was manufactured in 2005. It features worktable dimensions of 300 × 400 mm and travel capabilities of 300 × 200 × 300 mm. The machine is CNC controlled and has a power rating of 4 kVA. If you are looking to get high-quality drilling capabilities, consider the AGIE Drill drilling machine we have for sale. Contact us for further details.