dinse 焊接设备 二手 出售

MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg

MIG/MAG hose package -Dinse: DIX MSZ 2-304 -Length: 3.0 m -Water cooled -Weight: 2.8 kg

An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible.

MIG/MAG hose package -Dinse: DIX MC2 -Length: 3.0 m -Dinse: plug -Water cooled -Price: per piece -Number: 1 pieces -Weight: 2.7 kg

MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg

MIG/MAG hose package -Dinse: DIX MC1-202 -Length: 3.2 m -Dinse: plug -Air cooled -Weight: 2.6 kg

Earth cable for inert gas device, electrode device -Length: 2 m -Dinse connector -With: gas hose -Weight: 5 kg

MIG/MAG hose package extension, intermediate hose package -Length: 5 m -Dinse plug -With: gas hose -Weight: 11 kg

Ground cable for shielding gas device, electrode device -Length: 8 m -Version: Dinse plug, gas hose, control cable, -Cooling: Water-cooled -Weight: 24 kg

MIG/MAG hose package extension, intermediate hose package -Length: 30 m -Version: Dinse plug, gas hose, control cable -Weight: 68 kg

MIG/MAG hose package extension, intermediate hose package -Length: 13 m -Version: Dinse plug, gas hose, control cable -Weight: 28 kg

MIG/MAG hose package extension, intermediate hose package -Length: 27 m -Version: Dinse plug, gas hose, control cable -Weight: 64 kg

MIG/MAG hose package -Length: 3 m -Dinse connector -Water cooled -Number: 3x hose packages available -Price: per piece -Weight: 3 kg

Earth cable for inert gas device, electrode device -different: lengths -Dinse connector -Price per meter: 4 EUR/m -Number: several cables available -Price: per meter -Minimum purchase: complete

Earth cable for inert gas device, electrode device -Length: 2-3 m -Dinse connector -Number: several cables available -Price: per piece

Earth cable for inert gas device, electrode device -Length: 2-3 m -Dinse connector -Number: several cables available -Price: per piece

Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device -Length: 24 m -Plug: 4-pin -Transport dimension: 600/600/H100 mm -Weight: 18 kg

Ground cable for inert gas device, electrode device, stud welding device, MIG/MAG hose package -Welding cable: MIG/MAG hose package extension -Length: 30m -Plug: 10 pin -gas hose -Cooling water hoses -Transport dimension: 760/760/H400 mm -Weight: 47 kg

Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device -Length: 25m -Plug: 4-pin -Transport dimension: 570/480/H130 mm -Weight: 17.8 kg

Electrode tongs, electrode device, electrode welding device -Electrode clamp: cable without plug -Length: 5m -Weight: 4.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.24 m -Weight: 2.5kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/400/H110 mm -Weight: 3.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 4.0 m -Welding gun: Type DIX MG 1-01 -Transport dimensions: 470/360/H70 mm -Weight: 2.6 kg

Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 8.0 m -Connector: 5-pin -Transport dimensions: 460/450/H80 mm -Weight: 3.8 kg

Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 10.0 m -Connector: 14/8-pin, see photos -Cable coupling: DIX SK 70 -Transport dimensions: 460/450/H80 mm -Weight: 9.2 kg

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case -Manufacturer: Dinse gas-cooled wire feeder case -Type: DIX -Quantity: 7x wire feeder cases available -Price: per piece -Dimensions: 700/250/H390 mm -Weight: 27 kg/pc.

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 4.0 m -Welding gun: Type DIX MS 2 -Transport dimensions: 500/380/H80 mm -Weight: 4.5 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 4.7 m -Type: DIX MS 330-4 SA -Transport dimensions: 400/480/H100 mm -Weight: 4.2 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.5 m -Transport dimensions: 430/360/H85 mm -Weight: 3.2 kg

Ground cable for MIG/MAG welding machine, electrode welding machine, welding cable extension, MMA welding cable -Welding cable: Ground cable for MIG/MAG welding machine, electrode welding machine -Version: Dinse plug -Length: 10 meters -Weight: 5.7 kg

MIG/MAG hose package extension, intermediate hose package -Length: 33 m -Version: Dinse plug, gas hose, control cable -Weight: 72 kg

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

SWELD welding machine - Mains connection: 415 V (50/60 Hz) 3 Ph. - Transformer fuse: 30 A - Duty cycle: 375 A 40 % 300 A 60 % 230 A 100 % - Protection class: IP 23 S Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

One used complete mesh welding line from SCHLATTER. This MG305 works from line wire off spools and pre straightend cross wires. This machine is very complete, from line wire pay offs to the automatic turning and stacking unit for meshes up to 8.000mm This MG305 can weld up to 10mm and do have 100 and 150mm equipment. For the production of the cross wires is a good VITARI straightening and cutting machine availible For this line a big spare part package is availible as well and a lot equipment as: Spools ( 3 ton ) Butt welder Mesh Package Lifter Automatic Mesh Package Tyning System Compressor Main Transformer etc..

offer 22629 TIG welding machine - air-cooled equal-alternating current system, mobile - for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - Welding current TIG infinitely adjustable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current indicator - Frequency control of the arc - HF ignition - Pulse device - Hose package 5 m -Reducer - Ground cable - Carriage - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

MG 900 Schlatter Width: 1250 mm Length: 2000 mm Diameter 2-8 mm Pull in Pull out Cross Wire Magazine Stacker

Welding apparatus type G 400 1 Manufacturer: Messer Griesheim

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

Offer 24367 Specifications: - Orbital welding machine AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circumferential seam welding device AXXAIR CC 220 with motorized concentricity - Raw cutting machine AXXAIR CC 80 -Trolley - Table height 830 mm - Connection 220 V - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

• Year 2022 (like new) • Offering up to 800 amps of gouging power with 50 % dutycycle, • the KempGouge ARC 800 is a heavy duty power source package that is designed for all types of carbon arc gouging. • KempGouge can be used with the majority of metals, such as steel, stainless steel, cast iron, nickel, copper, magnesium, andaluminum. • KempGouge lets you open roots or faulty welds and cracks, prepare welding grooves, cut metals, make holes and cleancasts, and remove excess metal. • The characteristics curve controlling the KempGouge’s operating parameters has been designed specifically for carbon arc gouging, so its gouging properties are optimal. • The noise levels of KempGouge have also been kept very low. • FAST AND EFFECTIVE Way to remove defects, backgouge the root, cut metal and pierce holes • EASY WAY To move the equipment and adjust t ...

Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse

Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment

Used welding equipment As seen in the pictures, technical data See pictures. If you have any further questions, please Price is per piece

Key data: 220 A, 230 V

Manufacturer: Fronius Model: MagicWave 2200 Job G/F Type: TIG Welding Machine (AC/DC) Welding current range: 3–220 A Power supply: 230 V, 1~ Process: TIG/MMA Condition: used Location: Bremen

Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm

Offer 26610 Technical data : - All measurements are estimated - Working range / adjustment range horizontally approx. 3 m - Working range / adjustment range vertically approx. 3 m - Mast height approx. 5 m - Lift drive infinitely variable - Welding feed infinitely variable - Control panel with control + control cabinet + wiring - Welding source STARMATIC 1003 DC up to 1000 A - Welding mast STEITZ - UP – powder – boiler - Mot. Rail running gear for floor-mounted rails - Running rails floor-mounted approx. 25 - 30 m - Connection 400 V

Industrial Metalworking & Welding Equipment Inventory Overview: Offering a collection of heavy-duty vintage and modern industrial machinery. This inventory includes high-capacity press brakes, plate rollers, and specialized Oerlikon welding systems. Bending & Rolling Machines - Plate Bending Roller (35/3150): Wilhelmsburger (1959) - Plate Bending Roller (RMA 2500/8): Chr. Häusler (1963) - Heavy-Duty Press Brake (650t): Scharinghaus (1957) - Heavy-Duty Press Brake (500t K 1/3 M): Scharinghaus (1956) - Heavy-Duty Press Brake (200t): Scharinghaus (1955) - Profile Bending Machine (BO232 K): Hercules (1960) - Ring Bending Machine: Auersbach (Year N/A) - Swivel Bending / Folding Machine: Manufacturer N/A - Small Plate Roller: Manufacturer N/A Cutting, Pressing & Machining - Guillotine Shear (ScTP 25/3150): VEB Pressen- u. Scheren ERFURT (1966) - Small Guillotine Shear: Weingarten (Year N ...

400 V, with constant temperature control, with adjustable air volume and digital display for the air volume. For 40mm overlap with Cekom plug, with tension indicator, incl. wooden box. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 40 mm Weight: 57 kg Colour: green Dimensions: 740 x 480 x 470 mm Machine number: 1501221760