bobst 模切机 二手 出售

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

CUBE control system, 2 universal frame, Centre Line, Blanking station, Direct pallet loading, Automatic Universal feeder with non stop facility, Adjustable feed table with complement of infeed table furniture, Left and right hand side register lays, Bottom mounted gripper system, Double action stripping, Binder sheet insertion, hin plate with micro metric adjustment, tools for loading and transporting, Elevated 410 mm, MACHINE IS COMPLETELY WORKSHOP REFURBISHED !

Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Reference ID PP-52915 Category 5-Colors Flexo Printer Manufacturer Bobst Model Flexo 200 Year Built 1988 Color 5 Impression- Working Hours - Speed-- Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description 5 colors Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO TECHNIQUE;

Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories

Bobst SP 130 E Year 1985 Max.Size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. Cutting force: 500 T Centerline Immidiately available.

Bobst 1080

Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...

Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units

Web Width: 2450 mm

Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601

Flexo printing machine BOBST M6 + Milltex cutting machine Substrate width: 670 mm Print width: 660 mm Maximum speed: 200 m/min Monomatic Unwinder DZ15.67TB with Automatic Splicer Vario™ servo drive for inlet and outlet Kelva web cleaner Wet lamination in the printing unit Corona Treater – Vetaphone 13 flexographic printing units V-Flower Flexo Printheads in Sleeve Solution Drying system with 2 drying hoods – total drying length: 4.4 m GEW E2C HP 180 W/cm² UV Drying Lamps Two rail turning strips Lamination and cold foil stamping AVT Helios S Turbo HD System 2 barcode verification modules Laboratory color measurement with Delta E BST Powerscope Camera Web decrimping device 2 perstatic pumps for flexographic printing units 13 pressure sleeves 13 anilox rollers up to 550 lines/cm Milltex Sincroflex sheeting machine, built in 2020 Sheet cutting machine for paper ...

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Reference Num.: 4274 Brand: BOBST Type: SP 142 CER Construction year: 1995 Available: directly Status: In production Location: Deutschland

Format range: max. 1000 mm, min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, 4-point gluing, motorised format adjustment, servo overhaul folding with program memory, Robatec electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, feeder with vibrator, belt crusher on the right, left up to max. 30 mm, additional central transport, folding floor module A2 with additional upper and lower centre transport, additional central transport in folding station, pneumatic kicker, counter, Bobst CUBE control, camera surveillance, Small box equipment, pneumatic press belt. Overhaul in 2026: cleaned, checked, painted and with new press belts as well as new feeder and transport belts. Other: Machine can be viewed by appointment while running.

Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH

Impressions=0 m, Condition= Very Good , Availability= 2025-12-23, Bobst Speria 106 Sheet Counter: 200 million Maximum format: 740 × 1060 mm Minimum format: 350 x 400 mm Maximum Speed: 7700 sheets/hour Pressure: 260 tons Stripping station CUBE control Centreline system for quick job changes Quick lock stripping frame Micrometric adjustment 1mm thin plate system Electronic sheet travel control Double-action stripping OS pull side lay OOS push side lay Make-ready table - stripping Non-stop delivery

Format range: max. 680 mm min. 126 mm Equipment: Longitudinal seam, disc underglue unit left, Vibrator & dental gauge on the feeder, Bobst CUBE control, primary crusher right and left, kicker, counter, fully automatic format setting with program memory, pneumatic, intermittent press belt. Overhauled 2022: cleaned, checked, painted, new jetty and Transport belts.

Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...

Bobst Media 100 II A2 year 1999 HHS gluing system 6 guns cold glue 1 gun hot glue Disc Gluing

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

Bobst Domino 145 II Matic, Year 1996, Longitudinal seam, Automatic floor (3-point), 4/6-Punktklebung, Cold glue system from Valco Year 2019 with 5x nozzles, Hot melt adhesive system by hhs-Xmelt year 2017 with 3x nozzles, Handle dispenser, CoroPack 125 Bobst is included, year 1996 - electronic is new.

Bobst SP 102 CER, Max.Size: 720x1020 mm, Min.Size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max.Cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

max. sheet format 1040 x 740 mm, min. 400 x 350 mm, stripping station, centerline, non-stop feeder, non-stop deposit, drawing mark left, sliding mark right, gripper edge separation, raised 41cm, production hours: 25,000, Bobst-Cube control, micrometer adjustment, electric double sheet control, 1 upper die-cutting frame with quick-release fastener, 1 die-cutting plate 4mm, 1 upper stripping frame, 1 lower stripping frame, max. machine speed 7000 sheets/hour, max. punching force 250 tons, Processable materials: paper min. 80g/m², cardboard up to max. 2000g/m², corrugated cardboard up to 4mm. Overhauled, repainted

Reference ID: PP-56048 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 II Matic Year Built: 1996 Condition: Good Location: Europe Availability: Immediately Price: 85.000€ LOT Key Features & Equipment • Longitudinal seam configuration • Automatic bottom system (3-point) • 4/6-point gluing capability • Cold glue system by Valco (Year 2019) with 5 nozzles • Hot melt gluing system by hhs-Xmelt (Year 2017) with 3 nozzles • Integrated handle applicator • CoroPack 125 Bobst included (Year 1996) – electronics renewed

Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames

semi-automatic packaging aid for folder-gluers, boxes, folded flat: max. 400 mm, min. 50 mm, length of the boxes: max. 500 mm, min. 100 mm, standard, right-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, box types: ordinary folding boxes 4+6 dot boxes, with or without lid. Overhaul 2025: cleaned, checked, painted, new belts and belts

Reference ID: PP-56668 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SPO 1600 Year: 1986 Speed: 6000 sheets/h Max. size: 160 × 110 cm Min. Size: 60 × 52 cm Condition: Good Location: Europe Availability: Immediately

hoogte vijfde wiel, Max.Size: 800x1120mm, Min.Size: 380x450 mm, Max.Speed: 6500 Sh/h, Jahr 1974, Centerline, Quicklock system, in production

Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately

Bobst SP 102 CER, Max. size: 720x1020 mm, Minimum size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max. cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690

Bobst SP 142 ER, Year 1987, Max. size: 1020x1420 mm, Min. size: 700x520 mm, Max. speed: 6000 Sh/h, Max. cutting force: 600 T, Centerline, micrometer adjustment, in production

Bobst Sprintera 106 PER - with PowerRegister, Jahr 2003, Paper_ Cardboard_ Corrugated, From 70 g/m2 250 - 2000 g/m2, E flute and B flute up to 4 mm, Sheet size max. 1060 x 760 mm min. 400 x 350 mm, Die Cutting with gripper max. 1060 x 745 mm, Embossing max. 1060 x 740 mm, Gripper size from: 9 - 17 mm, The cutting knives height 23.8 mm, Embossing height 6.35 / 7 mm, Pressure 2.5 MN max., Speed (sh/h.) max. 12,000, Pallet height max. 1600 mm., Inclusive : - Power Register -, Height 60cm - Quicklock System, Centerline

Bobst SP 104 ER,, Year 1996, Max.Size: 1040x740 mm, Min.Size: 400x350 mm, Max.Speed: 8000 Sh/h, Max.Cutting force: 250T, Max. Thickness Corrugated board: 4.0 mm, Max.Paper gr/m: 2000 gr., Centerline, Quick-Lock system, Micrometer adjustment on the counterplate, Safety clamps for chain blocking, Non-Stop conveyer + Feeder, Chase changer

Bobst SPO 1575 + 2 Color Flexo Printing Unit, Jahr 1994, Max.Size: 1575x1075 mm, Min.Size: 600x400 mm, Max.Speed: 4500 Sh/h, Max.Cutting force: 350 t, Flexo Printing Unit year 1974

Bobst SP 142ER,, Year 1985, Max.Size: 1420x1020 mm, Min.Size: 700x500 mm, Max.Speed: 6000 Sh/h, Max.Cutting Force: 600 T, Centerline, Quicklock system, With tool separation station, Between-bow inserter and pre-taping device,, Working platform,, - 1 x preparation table for external tool preparation, - 4 x frames for breakout molds, - 4 x closing frames for punching tool, - 4 x Rescue vehicle

Bobst Cartonpack 4 with Case Erector, Year: 2022, Designation: Packer, Landtech Case Erector, Typ: C-2000-Tape, Year 2021�

Bobst SPO 160 ER - Matic, Year 2002, Max. Size: 1620x1120 mm, - Prefeeder Bobst C-160E Matic, - Transfer and aligning section with side and front alignment, - Die cutting section with center line, - Stripping station with quick lock system, - Blanking station with quick lock system, - Chase Loader for the preparation of the cutting form outside the machine, - integrated palletizer with batch control unit, - Computer with Matic Setup and Control system

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Format range: max. 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 4 channel with 2 application heads, disc undergluer on the left, Bobst CUBE control, vibrator, cleaning brushes in the feeder, primary crusher on the right and left, kicker, counter, digital position indicators, folding floor module A2, pneumatic, intermittent press belt. Overhaul in 2026: cleaned, checked, painted, new press belts as well as feeder and transport belts.

Bobst SP 142 E, Year 1992, Max.Size: 1020x1420 mm, Min.Size: 500x700 mm, Max.Speed: 6500 Sh/h, Max.Cutting force: 600 T, Centerline, Quicklocksystem

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

Automatic DIE Cutter TMZ EW-106 with Stripping Unit Baujahr / Year 1995 - Serial-No. 2643 Format / Sheet Size min. 450 x 450mm - max. 760 x 1060mm Dicke / Thickness min. 200g/m²- max. 2.000g/m² Kartondicke / Thickness corrugated max. 6mm Geschwindigkeit / Production per hour 6.000g/h Stanzkraft / Pressure total max. 300Tm Dimensions of machne L 4600mm x W 2300mm x H 2080mm Approximate net weight 13.500KGS With Stripping Unit and double Sheet control. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Franzenschneidemaschine - Fray DIE Cutter ABA G100 Year ca. 1972 - Serial-No. 5515329002 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test