avia 铣床 二手 出售

AVIA FNE 50N CNC milling machine was built in 2016 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. This is all due to its reliable spindle, which can work both vertically and horizontally, with the same specifications. The AVIA FNE 50N is controlled by an advanced HEIDENHAIN control system, which is distinguished by its intuitive operation and numerous useful functions. The FNE 50N toolroom milling machine weighs 3000 kg. Technical specifications of the AVIA FNE 50N CNC milling machine General data - feed in the X/Y/Z axis: 800/500/420 mm - feed in the X,Y,Z axis: 5-2000 mm/min - rapid traverse in the X/Y/Z axis: 10/10/7 m/min - maximum workpiece weight: 500 kg - spindle rotational speed: 50-4000 rpm - spindle rotational speed adju ...

AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...

AVIA FNE 40NC milling machine was built in 2001 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for precision machining of workpieces with a maximum weight of 400 kg. The machining process is performed in three axes by means of a reliable spindle with stepless speed adjustment. The spindle, mounted on a swivel workhead, moves in the Z axis on precision vertical guides. All this is complemented by the easy-to-use HEIDENHAIN NC control system, in which even the most advanced programmes can be created in just a few steps. The AVIA FNE toolroom milling machine weighs 1900 kg. Technical data of the AVIA FNE 40NC metal milling machine - NC controller: HEIDENHAIN TNC 310 - feed in the X/Y/Z axis: 620/420/400 mm - rapid traverse in the X/Y/Z axis: 6000/4000/4000 mm/min - feed rate adjustment: stepless - maximum workpiece weight: 400 kg - horizontal work table  ...

Milling machine - Universal Make: AVIA Type: FND 25 Year of construction: 1984 Control type: conventional Country of origin: Poland Delivery period: right away Technical details x-way: 400 mm y-way: 360 mm z-Way: 400 mm Mounting table: 800x400 mm Tool holder: SK40 Quill Hub: 100 mm Speed: 40...2000 rpm Total power requirement: 4.5 kW Machine weight approx.: approx. 2.4 t Space requirements approx.: L:1.6xW:1.3xH:2.0 m

Key data: 650 mm, 600 mm, 620 mm

From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/min transmission ratio: 2 drive capacity - spindle motor: 6 kW tension force: 10 kN swivellable: manuell +/-45 ° max. tool diameter: 125 mm max. tool weight: 6 kg table surface area: 400 x 800 mm T-slots: 5x14x80 max. table load: 400 kg feed speeds: X/Y: 0 - 6.000 mm/min feed speeds: Z: 0 - 4.000 mm/min rapid traverse: X/Y: 6 m/min rapid traverse: Z: 4 m/min total power requirement: 11 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,9 x 3,5 x 2,0 m Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow The data for this ad was created with ModulMWS - the software solution of ...

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

Weight: 1,5 t serial number: 4193 : ja vice: ja x-travel: 500 mm length: 1200 mm width: 1300 mm height: 1789 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm control: TNC 320 HEIDENHAIN spindle taper ISO: 40 spindle turning speed range: 50 - 4.000 U/min table-size: 800 x 400 mm table load: 400 kg feeds -stepless-: 0 - 8000 mm/min rapid traverse: 8,0 m/min power capacity: 6,0 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 17,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,90 x 2,70 x 2,05 m - Fabr.No.: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm digital readout: 3 Achsen HEIDENHAIN spindle taper ISO: 40 DIN 69871A spindle turning speed range: 50 - 4000 U/min table-size: 800 x 400 mm table load: 400 kg feeds -stepless-: max. 2000 mm/min rapid traverse: 5 / 4 m/min power capacity - milling spindle: (S1) 10,5 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,00 x 2,76 x 2,05 m - Serial-No.: 90395 - Digital display HEIDENHAIN ND780 - electr. handwheel - mechanical handwheels - stepless speed control - stepless feed drives - horizontal milling spindle - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 124 turning speed range - spindle: U/min transmission ratio: drive capacity - spindle motor: kW tension force: kN swivellable: manuell +/-45 ° max. tool diameter: 125 mm max. tool weight: 6 kg table surface area: 400 x 800 mm T-slots: 5x14x80 max. table load: 400 kg feed speeds: X/Y: 0 - 6.000 mm/min feed speeds: Z: 0 - 4.000 mm/min rapid traverse: X/Y: 6 m/min rapid traverse: Z: 4 m/min total power requirement: 11 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,9 x 3,5 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement:2,4 kW weight of the machine ca.:1150 kg dimensions of the machine ca.:1550 x 1615 x 1630 mm table clamping surface LxW:315 x 710 mm max. tool weight:200 kg T - slots distance:63 mm T - slots - width:12 mm taper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/min feed speeds:11,2 -355 mm/min Documents:vorhanden

x-travel:600 mm y-travel:400 mm z-travel:380 mm total power requirement:6 kW weight of the machine ca.:1700 t dimensions of the machine ca.:1800 x 2130 x 1980 mm Table dimensions:400 x 800 mm T-slots:7 St.,14 x50 table load:300 kg spindle:SK40 turning speed range:63-250 U/min speed steps work spindle:18 spindle speeds::50- 2500 n/min feeds:10-500 mn/min Documents:vorhanden

I am pleased to offer the following Grinder:-, Used Avian Engineering Model G46/ 86 Grinder, Main Motor 30 kW, Blower Motor 4 kW, Rotor Blades 6pcs, Stator Blades 4pcs, Rated Through-put +500 KG/ H, Cutting Chamber 460 x 850 mm, Hopper Opening 850 x 500 mm, Film infeed width: 800 mm, CUTTING CHAMBER, The cutting chambers are made entirely of high quality steel. CNC machined and ground before assembly. Long life is ensured by the use of heavy wall sections and high grade material that will not contaminate the material being ground. The design allows for easy disassembly, repair and maintenance., ROTOR, The rotors are manufactured from high tensile steel and are balanced for stable running. The rotors are manufactured with scissor cut action. The Rotor design allows for easy removal and set-up of the blades and gives a consistent particle size. Transmission system: Belt and pulley driven,  ...

AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

AVIA FNE 40P – Universal milling machine built in 2014 Highlights • Year of construction 2014 • Model AVIA FNE 40P • 3-axis digital display ARBAH-M • Tool holder SK 40 • Rotatable milling head • Without vertical milling unit • Closed work area • Coolant system • Machine weight approx. 2000 kg Technical data • Travel distances: 3 axes (X, Y, Z) • Table dimensions: approx. 800 x 400 mm • Max. tool diameter: 125 mm • Max. tool weight: 6 kg • Machine dimensions: approx. 2300 x 2100 x 2100 mm • Machine weight: approx. 2000 kg Equipment • Protective cover with viewing window • Control panel • Machine lighting • Emergency stop switch Auction-ID: A7-46968-1

Duerselen 7-fold drill head; suitable for Duerselen Corta paper drilling machines; was developed for aviation, stapling for flight maps; Abstaende see picture. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300  ...

Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Farsoon SS403P-H (Year 2023) – Industrial Metal 3D Printer including Peripherals, For sale is a Farsoon SS403P-H, year of construction 2023, with under 11,000 operating hours. The system is in a well-maintained, operational condition. The last maintenance was performed in 2024 and 2025through which technically proper operation is ensured., The offer includes a complete production setup including relevant peripheral devices and is thus ideal for direct deployment in an industrial manufacturing environment., ---------------------------------------------------------------, scope of delivery, - Farsoon SS403P-H Metal 3D Printing System, - Escape station (Powder removal / component uncovering), - Industrial cooler, - Nitrogen generator, - Accessories and operationally relevant components (upon agreement), ---------------------------------------------------------------, Technical specific ...