atlas copco 起重机 二手 出售

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.

2 pieces of crane bottles

DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Headliner (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: laterally 3 meters and forward/backward 2 meters Steel beams: included in the offer Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Su ...

Crane hook Capacity: 80 tons Crane hook fully functional, but not suitable for our use.

Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm

Technical data: - Load capacity 8000 Kg - 3 stop chains variable with hoe load capacity each 5000 Kg - 2 x chain length with hoes max. approx. 500 mm - 1 x chain length with hoes max. approx. 2000 mm - 1 x arm length approx. 750 mm - 1 x arm length approx. 1200 mm - 1 x arm length approx. 1400 mm - Mounting arms adjustable on the side - Mounting bracket adjustable in grid - Traverse dimension approx. L 1800 x W 2200 mm - Weight with chains approx. 550 Kg

TECHNICAL SPECIFICATIONS Manufacturer: PFEIFER Seil- und Hebetechnik GmbH Description: Two-crane crossbeam, crane crossbeam, pipe crossbeam Type: 270092 Year of construction: 2015 Load capacity: 40,000 kg Weight: 3,150 kg Working length/gripping range: 1,920 - 7,250 mm SPECIFIC COMMENT - Variable anchor points - Ideal for transporting heavy concrete segments - Last inspection in accordance with BetrSichV 09/2023

Specifications: - Load capacity 8 t - Usable height 620 mm - Total height 780 mm - 4 pieces of load pick-up double hooks adjustable - Grid distance adjustment double hoes 100 mm - Truss beam IPE 240 - Total length approx. 2000 mm - Total width approx. 1050 mm - Weight approx. 350 kg

weight max. in kg: 10000 kg weight: 10 kg dimensions: 700 x 300 x 300 mm with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible.

lifting force: 5,0 t height: 585 mm width: 230 mm weight of the machine ca.: 25 kg Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge Model with 10 to. Lifting capacity also available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25153 Specifications: - Load capacity 12.5 t - Truss length 2900 mm - Truss height 350 mm - Truss beam consisting of 2 x UNP 200 - 2 x sling chains with ring + shekel L 1400 mm - Anchor points with spacing 1400 mm - left + right 4 pcs double load handling hooks each - Distance between the mounting hooks 300 mm each - Space requirement approx. L 2900 x H 350 x D 500 mm - Net weight approx. 500 kg

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: ~ 0,75 t output: 2,5 PS weight: ~ 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Technical data : - Load capacity approx. 30 t - 2 crane mounting holes with through bolts 80 mm - Distance between the mounting bolts 100 mm - 2 stop extinguishers with a diameter of 65 mm - Distance between stop openings 235 mm - Stop height 800 mm - Overall height 990 mm - Truss beam HEM 360 - Truss dimensions approx. L 3150 x W 400 x H 480 mm - Weight approx. 450 kg

Offer 25429 Technical data : - Load capacity 1 t - Crane attachment eye in the middle - Suspension height approx. 500 mm - 2 adjustable stop eyes adjustable 1000 to 2500 mm - Adjustable distance 150 mm - Truss cross-section W 100 x H 100 mm - Overall dimensions approx. L 2650 x W 170 x H 500 mm - Weight approx. 70 kg

weight max.: 32 t clamping width: 4000 mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 4 x 0,6 x 0,5 m Adjustable spreader beam for 32-tonne cranes - Central crane attachment point - Additional/alternative crane attachment points on the outer sides - 2 individually adjustable load attachment points Spreader beam length: 4000 mm Spreader beam width: 300 mm Weight: 980 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knuckle Boom Crane Available – National Oilwell Varco (NOV) High-quality offshore lifting equipment ready for deployment: Make: National Oilwell Varco (NOV) Crane Type: Knuckle Boom Crane Model: OC2599KCE-15-25(18) Manufactured: 2011 Condition: Excellent Origin: Removed from FPSO vessel Safe Working Load (SWL) & Radius: • 1 Fall: 7.5T 25.4m • 2 Fall: 15T 24.9m ⚖️ Weight: 47.1T (excluding pedestal) Location: Europe Ideal for offshore, marine, and heavy lifting operations.