wohlenberg 雑 中古 販売のため

Wohlenberg VARIO S perfectbinder Technical Details No. 82298 Year: 1988 Size: max- 305 x 460 mm min- 105 x 140 mm Ticknes: max- 60 mm min- 2 mm Open size: max- 655 x 470 mm min- 210 x 140 mm Speed: 7000 tact/h Equipment: 26 clamps, central adjustment for clamps ect Additional Information Typ: Wohlenberg Year of man. 1988 Condition: very good Available: immediately Description Wohlenberg 460 gathering machine Format: max- 320 x 460 mm min 70 x 105 mm Speed: 7000 tact/h, 16 automatic stations Wohlenberg trimmer 44 FM Uncuted size: max - 315 x 460 mm Cuted size: max 300 x 440 mm min- 70 x 80 mm Speed: max - 3000 tact/h min - 1200 tact/h Wohlenberg ZS 12 (booklet stacker) Size: max 410 x 10 mm min 145 x 90 mm Ticknes: max 60 mm min 5 mm Speed: 12.000 tact/h

Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...

Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker

Main Unit: Wohlenberg 185 Guillotine Cutter Manufacturer: Wohlenberg Model: 185 Year of Manufacture: 2004 Test Piece Diameter: 10 mm Curtain Separation Distance: 400 mm Maximum Stopping Performance: ≤ 318 ms Included Equipment: - Baumann NUP2000 Pile Lifter Manufacturer: Model: NUP2000 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 20,000 N - Power Consumption: 3.2 kW - Current Draw: 7.4 A - Circuit Diagram No.: 625.00 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 20,000 N - Power Consumption: 3.2 kW - Current Draw: 7.4 A - Circuit Diagram No.: 625.00 2.Baumann BA7 Stacker Manufacturer: Baumann Model: BA7 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 5,000 N - Power Consumption: 0.6 kW - Current Draw: 1.6 A - Circuit Diagram No.: 592.065D  ...

Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation

4X RESERVE KNIFE FOR WOHLENBERG 155 Format (cm): 155 1x brand new / unused

Cutting machine Wohlenberg 115 MCS-2 TV, machine number 3524-007, air table, light barriers, program control, monitor, side tables, back table cover, 1 spare knife, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30W Baujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine / Gullotine Wohlenberg 92 MCS2-TV Baujahr / Year 1988 Schnittbreite / Cutting width max. 920mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Wohlenberg 76 SPM Serial-No. 3212-011 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives In einem guten Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Ersatzmesser für Schneidmaschinen - Spare Knife for Guillotines Polar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

Wohlenberg Guillotine with spare knife, in very good production ready condition. Gives exact cut and everything operational. Can be used to cut other materials rather than paper, such as vinal, plastic, tin, etc.

An old and dismantled Wohlenberg lathe is available. Center width: 4000mm, face plate diameter: 900mm, length: 6000mm, width: 1000mm. On-site inspection is possible.

Schneidmaschine mit Rüttler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm

Dreimesserautomat / Three Knife Trimmer Wohlenberg FA 38 Baujahr / Year 1989 Format / Size max. 315 x 410mm Thicknes max. 100 mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery

Schneidmaschine / Gullotine Wohlenberg 92 MCS-2 TV Baujahr / Year 1989 - Serial-No. 3277-029 Schnittbreite / Cutting width max. 920mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include

Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

Manufacturer: Wohlenberg • Machine Type: Paper Cutting Machine / Guillotine • Cutting width: max. 760 mm • Cutting height: approx. 120 mm • Year of manufacture: 2004 • Application: Cutting stacks of paper, cardboard, printing sheets in printing and bookbinding shops • Control: Electronic display, programmable cutting sequences • Equipment: air table, side tables, light barriers for safety, hydraulic press beam • Accessories: 4 x spare blades

Reference ID: PP-56192 Category: Guillotines Manufacturer: Wohlenberg Model: 155 Year: 2000 Max. size: 155 cm Condition: Good Location: Europe Availability: Immediately

Wohlenberg 115

Reference ID PP-57040 Category Guillotines Manufacturer Wohlenberg Model cut-tec 115 Year Built 2003 Color - Impression - Working Hours - Speed - - Max. size 115 cm Min. Size - Condition Good Location Europe Availability Immediately

program with 12 monitor Air table Side table right with air Side table left with air Photocell Optical cut-off sandeuter Downside stroke right 2 Knives Still in operation: No Available: immediately

Digital Program Air table Side table right with air Side table left with air Photocell Cutting sanduder 2 knives Unloader BA 7 Still in operation: No Available: immediately

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

<br>Collective chain &amp; investors 1 station hand feeding 6 Stehendbogenanleger Double and false sheet control Bulletin station 2 Heftk pfe Hohner Large of roller cleaning for 4 wire wheels 1 Three knife trimmer Media cutting device Band display<br><br>Still in operation: No.<br>Available: immediately

Cutting length 76 cm, see also pictures 1 knife set extra Continue: 1 cutting knife KLINGELNBERG / IKS 1390 x 160 x 14 mm

Machine No.: 3857-006 Programs, Side Tables, Light Bariers, Air Table, Standard Accessories

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 5000 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 780 mm turning length: 4100 mm Control: Siemens type: 840 D bed width: 710 mm faceplate: 1000 mm turning speeds: 1110 U/min total power requirement: 4,79-69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

turning diameter over bed: 1450 mm turning diameter over slide rest: 1070 mm turning length: 7000 mm turning speeds: 2,24-450 U/min Control: faceplate: 1400 mm spindle passage: 160 mm steady: 400 mm drive capacity - workpiece: 63 kW Tail stock:: elektr. diameter of quill: 200 mm bed width: 950 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format (cm): 76

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt Year of Construction: ca. 1990

turning diameter: 1070 mm turning length: 4000 mm control: Siemens type: 810 T turning diameter over slide: 700 mm spindle passage: 104 mm bed width: 710 mm turning speeds: 3,55-710 U/min max. workpiece weight between centres: 5000 kg steady: 500 mm Holder Multifix: total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 520 mm centre height: 500 mm width: 130 mm quill:: 3 St. diameter of quill: 70 mm bearing diameter: 65 mm width: 20 mm base plate: 415x270 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1320 mm turning diameter over slide rest: 820 mm turning length: 4400 mm Control: faceplate: 1200 mm bed width: 800 mm spindle passage: 167 mm steady: 480 control: IMS total power requirement: 76 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 650 mm turning length: 3500 mm spindle bore: 108 mm faceplate: 1000 mm steady: 500 Control: Siemens type: 840 D bed width: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

S. No.: 3392-014 Format (cm): 76 Equipment / Additional information: Side tables, air table, 1xreserve knife

turning diameter over bed: 920 mm turning diameter over slide rest: 720 mm turning length: 4000 mm turning speeds: 1,4-280 U/min digital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Mo ...

turning diameter over bed: 1800 mm turning diameter over slide rest: 1450 mm turning length: 940 mm bed width: 1040 mm turning speeds: 2,35-118 U/min faceplate diameter: 1400 mm turning dia. in gap: 2450 mm Travel: 1200 mm Distance between the canter 7000mm Faceplate diameter 1400 urning diameter in the offset 2450, length 940 mm Travel over support 1200 Over support with autom. travel The tech. Data are manufacturer or operatorinformation and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. ...

Chromed Air Table, Programs, Side Tables, Light Bariers, Colour Display, Standard Accessories

Three Knife Trimmer Size: 32x42

Perfect binder Master e Connecting bridge Speed: 1,000 - 6,500 cycles/hour Dedusting station with suction nozzle Output max.: 1,000 - 6,500 cycles/hour Product height: 140 - 435 mm Document width: 75 - 370 mm Speed (inline): 1,000 - 8,000 cycles/hour Gathering machine Sprinter 7010 (16 stations) 16 gathering stations Control: PLC Heavy Duty Back Machining Tool 18 brackets Furniture for small format Pressure station Electronic double-sheet inspection Product width: 105 - 320 mm Min. paper weight: 70 g/m² Fault sheet inspection Main milling machine Folding station Creasing station Cross-stack delivery Product thickness: 2 - 62 mm Manual docking station Max. layer thickness: 3 mm Clamp opening: 12 - 90 mm Hot Melt Back Tying Station PUR back binding Hot Melt Side Binding Station Envelope feeder 2 pressure stations

Chromed Air Table, Programs, Air Side Tables, Light Bariers, Standard Accessories

Central and lateral air tables Light guards Chromed tables Digital program

- Maximum swing 500 mm - 3 x adjustable bronze rollers - 2 Matching steady rest 

Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 6000 mm spindle bore: 82 mm turning speeds: 4,5-900 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: rapid traverse: total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Y ...

cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 2750 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 turning diameter in the gap: 1400 mm length of gap: 900 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by ap ...

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt

turning diameter over bed: 980 mm turning diameter over slide rest: 720 mm turning length: 7000 mm bed width: 620 mm turning speeds: 1,8-355 U/min faceplate diameter: 800 mm : turning dia. in gap: 1000 mm length of gap: 350 mm quill stroke: 900 mm spindle hollow: 80 mm weight: 20 t steady: 600 mm steady: 480 mm steady: 480 mm Distance between the canter 7000mm Faceplate diameter 1400 urning diameter in the offset 2450, length 940 mm Travel over support 1200 Over support with autom. travel The tech. Data are manufacturer or operatorinformation and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your b ...