viet 粉砕機 中古 販売のため

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200

Manufacturer: Viet, Type: Challenge 223-TM, Year: 2001, Monting of the machine: Langs/Schuh, Sanding width mm: 1350, Sanding hight mm: 3-160, Rubber roller: 1, Shore roller 1: 60, Belt 2 shoe unit: yes, Weight in kg: 3350, Year :2001

Manufacturer: Viet, Type: Valleria Challenge 333TM, Year: 2000, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Year :2000

Manufacturer: Viet, Type: Valeria Challenge 223 TM, Year: 2000, Monting of the machine: Längs/Längs, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Weight in kg: 3450, Year :2000

Manufacturer: Viet Lackschleifmaschine, Type: Valeria, Year: 1996, Control: Viett, Monting of the machine: Walze, Sanding width mm: 1300, Sanding hight mm: 6-120, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Rollers: 1, Shore roller 1: 30, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-18, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Werkstück-Abstrahleinrichtung: yes, Year :1996

VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

Manufacturer: Viet, Type: S3 T T23TM, Year: 2007, Monting of the machine: Quer/Quer/Bürste , Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 8700 X150 /2620 X 1350/, Table hight adjustment by engine: yes, Band 1Querschleifaggregat: 2, Band 1 Leistung kW : 22, Band 1 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Schuhaggregat: yes, Band 2 Leistung kW : 22, Band 2 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Drucklammellenband: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Pressure pads for short workpieces: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Year :2007

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Grinder for bucket seats with 2 air bellows

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Grinding machine Kündig type BOTOP-4 1100 RP RP Specifications: • Grinding from above and below: with roller and pneumatic sanding shoe unit • Machining of parts on both sides: in one pass • Above-average working speed, reduced workload, excellent surface finish • Working width (mm): 1100 • Feed: 1.5 kW each over FU • Height adjustment: 0.75 kW each • PLC Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, automatic adjustment and automatic start of feed and grinding process

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant