unotech プレス 中古 販売のため

automatic baler Manufacturer: UnoTech Type: UPAMAT 40 H3 Year of Make: 2013 Operating hours: approx. 5,000 specifications: Cutting force: 480 kn at 315 bar Press force: 400 kn at 260 bar Filling opening 1,250 x 920 mm Channel format: 700 x 1,000 mm (H x W) Drive power: 15.0 kW Pump flow rate: 50 Ltr./min. Pump: Double Gear Pump Required oil quantity: 200 Ltr. Oil type: HLP ISO 68 Throughput: - 1.8 t at 20 - 30 kg/m³ bulk density - 3.0 t at 35 - 50 kg/m³ bulk density - 3.5 t at 60 kg/m³ bulk density Bale weight: up to approx. 320 kg Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Control: Siemens S7, IM-151 Dimensions: Width approx. 4,202 mm Length approx. 7,185 mm Height approx. 2,060 mm Machine weight: approx. 7,000 kg Noise emission: approx. 82 - 85 dB ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3/So Hours: 85 hours Year of Make: 2022 specifications: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 47,400 kg Filling opening: 1,020 x 1,600 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and install ...

used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2022 specifications: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 30 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 1.7 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 2.5 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 9.5 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Machine has slight fire damage and will be completely repaired if the order is placed.

Manufacturer: UnoTech Model: 200 V5H4 RB Year of Manufacture: 2017 Loose hydraulic unit with 4x 75kW pumps Find more here - / Contact us at -

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -