tbt ボーリングミルとマシニングセンター 中古 販売のため

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB

Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm   total height: 2700 mm   total weight approx.: 10800 kg 20 toolstationswith rotating table 800x600approx 46300hIncluding chip conveyor and variou ...

Drilling method ELB Full drilling 4-33mm Drilling depth max 737mm Spindle antrib 7,5 kw Spindle speed 550-6400rpm Working feed 35-320mm/min Rapid traverse 3500mm/min Coolant High Pressure Pump, Paper Filter, Chip Conveyor, Magnetic Separator Connection 20 KW Dimensions 4100 x 1650 x 1850mm Weight 3500 KG

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg : Packing: ca. 10 Lademeter m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Drilling, Milling, Tapping for heatexchanger bases and plates   - Swivable A Axis + 25 to - 15 Degrees - Filtration and Coolant system 1000 L - Cip conveyor 2000 x 1200 height out put - Milling tool changer Tower Station 20 positions - Capacity ELB Drilling 3 - 35 mm  - Capacity Milling 250 ccm/Min   - Feed rates all axis 15.000 mm/Min X-Y-W-Z - Cutting hours ca 15.000 - Large tooling package

The machine is completely overhauled and therefore as good as new! Technical data Drilling method: Lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 400 mm Max. workpiece length 400 mm Manufacturer: TBT / SFT New electrics and new CNC control Siemens! We see ourselves as a competent partner in the field of deep hole drilling. You are also welcome to send us inquiries in the contract processing of deep hole drilling work.

Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories