soraluce ボーリングミルとマシニングセンター 中古 販売のため

Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.

Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1000 mm total power requirement: 22 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 10.000 x 6.000 x 4.250 m Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mm y-travel: 1600 mm z-travel: 900 mm turning speeds: 20-2000 U/min spindle taper ISO: SK50 Table dimensions: 5000x1000 mm control: Heidenhain TNC 415B spindle drive motor: 22 kW rapid traverse: 5000 mm/min Table load: 12500 kg range L-W-H: 7,3x4x3,2 m milling head -swivable +/-: CNC 360 ° weight of the machine ca.: 16 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10373 Manufacturer: SORALUCE Year of construction: 2017 Type of control: CNC Control: Heidenhain 530i Storage location: Halberstadt Country of origin: Spanien X-Travel: 6500 mm Y-Travel: 1600 mm Z-Travel: 900 mm Table-Size (Lxw): 8000 x 900 mm Drive power spindle: 28 kW Swivel range milling head: 2,5 ° Tool Taper: SK 50 Feed rate: 15000 mm / min Further information: - Number of axes = 3 + 2 - incl. Swivel head

x-travel: 5.500 mm y-travel: 1.400 mm z-travel: 1.000 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 6.000 x 1.200 mm max. workpiece weight: 13.500 kg/m² Nc rotary table: - position: rechts, bündig integriert in Tischfläche surface area: Ø 1.000 mm positioning accuracy: 360 x 0,001 mm T-slot number x size: 12 x 22 Abstand 100 mm Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 28 kW Speed range, stepless: 15 - 5.000 min-1 max. torque: 815 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 80 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 20 kg changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 25.000 ...

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

Control Siemens ... Sinumerik 840D Sl Table dimensions ... 1600mm Axis X ... 8000mm Axis Y ... 1300mm Axis Z ... 1800mm Spindle speed ... 20-4000 rpm ISO 50 cooling ... 30bar Rapid traverse ... 35m/min Machine weight ... 36500kg

Key data: 8000 mm, 1300 mm, 2200 mm

1 new CNC travelling column milling machine Make: Soraluce Model: FL 8000 Year of manufacture: 2014/15 Spindle hours: 3242 Hours: 4261 Control: Siemens 840 D Solution Line Technical data: Travel distances X-Y-Z: 8000 x 1300 x 1800 mm Travel C-axis: 360 degrees Plate clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm. Main drive: 43 kw. Rapid traverse: 35 m/min. CNC rotary table: 1600 mm 250 rpm Weight approx.; 40 to. Equipment / Accessories: Tool magazine: Controlled universal milling head Conveyor Full enclosure Complete cooling water system electronic handwheel IKZ. Fibro Reversible Clamp Fibr ...

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible.

CNC Model: Heidenhain CNC Version: iTNC 530 Head Type: Automatic Bi-Rotary Head Additional technical notes for the head: Indexed on the two joints at 0.001° Tool Mount: ISO 50 Spindle power: 28Kw Spindle speed: 5000 Number of tools: 40 X-axis travel: 8500mm Y-axis travel: 1000mm Z-axis travel: 1450mm Fast feeds for linear axes X Y Z: 35m/min Table dimensions: 9000 x 1100mm Table capacity: 12000Kg High refrigerant pressure: yes External tank system with filter: yes Cutter type: mobile column Chip conveyor: belt Other technical data: Pendulum machining prepared for mounting a turntable above the bench with wiring and hydraulic connections installed and related operation in the electrical cabinet Machine equipment: Electrospindle: 12 kW, 20,000 rpm, HSK40 with 7-position tool changer 2 control consoles, (one in the operator's cabi ...

- FP Model ideal for variety of application Medium-Large size Components - Floor type milling boring machine - High dynamics with speeds of 35M/Min - INA linear guiding system  - Hydro mechanical clamping slides - Orthogonal milling head for machining at any desired angle - Y Travel = 2600 + 500 head upright = 3100 mm stroke in Y Axis 

- Aiptek ATC 30 positions - Automatic head 2.5 x 2.5 Gr - Central lubrication - Machine housing with front doors - Large tool package 

ATC Chain 40 positons Max. tool size  Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm

- Y Travel with head 180 = 3700 - Y from floorplate to spindle middle = 4200 mm - Chain ATC Tool changer 80 positions - Rotary table 1500 x 1500 with V-Axis 1500 mm - Table load 15.000 Kg - Optional Box table 3500 x 1000 x 1000 mm - Under power  - Spindle hours 9300 H 

x-travel: 9000 mm y-travel: 3200 mm z-travel: 1900 mm w-axis: 1000 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Drehverschiebetisch 2 Stück table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested ...

x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.

x-travel: 9000 mm y-travel: 3200 mm z-travel: 1900 mm w-axis: 700 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Drehverschiebetisch 2 Stück table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree Horizontal milling attachment Henninger angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and ac ...

x-travel: 8000 mm y-travel: 2600 mm z-travel: 1500 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Schiebe- und Drehtisch 2 Stück table load: max. 20 t turning speeds: 100 U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 43 kW number of tables: faceplate: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ortho head 1x0.001 degree Turning tool holder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

x-travel: 6000 mm y-travel: 4750 mm z-travel: 1500 mm control: Siemens 840 D SL Table: Verschiebetisch table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us.  ...

Used scrollable radial drill Soraluce TR1-1600. Arm: 1600mm. Displacement: 1800mm. Drilling capacity in steel: 60mm. Drilling capacity in cast iron: 80mm. Boring capacity in steel: 100mm. Boring capacity in cast iron: 120mm. Thread capacity in steel: 50mm. Thread capacity in cast iron: 70mm. Spindle diameter: 90mm. Spindle travel: 350mm. Number of speeds: 12. Power: 7,5hp. CE: Optional.

x-travel: 8.500 mm y-travel: 2.000 mm z-travel: 1.500 mm Control: HEIDENHAIN iTNC530 rapid travel x/y/z: 25.000 mm/min table-size: 10.000 x 1.350 mm table weight: max. 5 t/qm milling head: orthogonal 1° x 1° tool taper: SK- 50 number of spindle speeds: 4.000 U/min/rpm power capacity: 37 kW max. torque on the spindle: 900 Nm Internal cooling system: 15 bar tool change unit: 60 pos. handwheel: HR 410 Chip coveyor: Inkl. Machine on: 39.000 h Spindle hours: 16.000 h total power requirement: 75 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 12,7 x 5,2 x 4,6 m Orthogonal milling head, water-cooled, with 1° indexing in 2 axes (360 positions in the rear plane and 270 positions in the front plane) 3D wireless probe M&H 20.41 Partition wall for parallel operation/setup Internal air blast Adapter for high-speed milling spindles with torque support Operator platform moves with  ...

Control Heidenhain TNC 640 Speed [rpm] 5000 Travel X/Y/Z [mm] 4500/1800/1300 General: Control Heidenhain TNC 640 Travel X/Y/Z 4,500/1,800/1,300 mm Speed 5,000 rpm Tool holder SK 50 Milling head (spindle): Technology Diagonal head with gear spindle Pitch 0.001° Speed 5,000 rpm Tool holder SK 50 Power max. 43 kW Torque max. 1,045 Nm Media Feedthrough KSS + Blown Air Work table: Clamping area 6,000 x 1,100 mm T-slots 6x 22H12, spacing 140 mm Tool magazine: Technology Chain Magazine Number of stations 40 Tool changer double gripper (horizontal/vertical) Tool diameter max. 125 (250) mm Tool length max. 400 mm Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system with filter, 20 bar Workpiece Measurement Radio Probe M&H Setup operation Electronic handwheel HR 510 Adaptive Cont ...

travel -x axis: 8.000 mm travel -y axis: 2.600 mm travel -z axis: 1.500 mm control: HEIDENHAIN - iTNC 530 turning speed range: 20 - 5.000 U/min numbers of positions in the tool changer: 60 tool taper: SK50 clamping plate: 10.000 x 2.500 mm CNC Milling machine | SORALUCE - FP-8000 equipped with radio measuring probe, 60-way tool changer and clamping plates. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FP8000 | FP 8000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 2.500 mm travel -y axis: 1.000 mm travel -z axis: 1.250 mm control: HEIDENHAIN - TNC 530 turning speed range: 20 - 4.000 U/min with NC rotary table: 1.000 x 1.000 table surface area: 2.700 x 850 mm numbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A25A | TA-25 A | TA 25 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...

x-travel:6000 mm y-travel:2100 mm z-travel:1500 mm Controls:HEIDENHAIN iTNC 530 BASIC DESIGN:. - basic design : travelling column :. WORKING RANGE -MILLING-:. - x-axis travel:6000 mm - y-axis travel:2100 mm - z-axis travel:1500 mm FLOOR PLATE:. - clamping surface (left-right):7000 mm - clamping surface (front-back):2000 mm WORKING SPINDLE / HEAD:. - spindle type : orthogonal head :. - tilting range:360 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - tilting range (2nd axis):270 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - spindle revolutions (min):20 /min - spindle revolutions (max):4000 /min - spindle diameter:90 mm - taper fixture : ISO SK 50 :. - spindle power (continuous):32 kW - torque (max.):910 Nm AXIS DRIVES:. - feed velocity (min):2 mm/min - feed velocity (max):20000 mm/min - rapid traverse:25000 mm/min ELE ...

automatic:Werkzeugspannung Spannk.15000 N total power requirement:63 KVA weight of the machine ca.:56000 kg table-size:22000 x 800 mm Tool bore:ISO 50, DIN 69871 AD x-travel:20500 mm y-travel:1600 mm z-travel:1000 mm dimensions of the machine ca.:24 x 6 x 4 m tool piece magazine with:30 Plätze

x-travel:8500 mm y-travel:2000 mm z-travel:1500 mm rapid travel x/y/z:25 m/min table-size:10.000 x 1.350 mm table load:max. 5 t/qm universal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/min power capacity:37 kW max. torque on the spindle:900 Nm internal coolant system feed:15 bar control:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KW dimensions of the machine ca.:12,7 x 5,2 x 4,6 m weight of the machine ca.:35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscella ...

x-travel:30000 mm y-travel:3600 mm z-travel:1900 mm milling head speed:1 - 4000 U/min spindle taper ISO:50 feed speeds:1 - 10000 mm/min rapid traverse:25 m/min milling spindle motor:46 kW total power requirement:85 kW dimensions of the machine ca.:45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment