scm casadei 粉砕機 中古 販売のため

Key data: 1100 , 2 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Key data: 1350 , 3 , 160

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Key data: 950 , 1 , 160

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Key data: 1350 , 2 , 160

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Key data: 6 , 60 , 4000

Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

Grinding width 950 mm  Steel roller for calibration  1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering  Automatic electronic operation control

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for the aggregates LED interior lighting Y version for RTC - Pneumatic on/off switch for the roller of the first unit ? R? - Pneumatic on/off switch for the roller of the second comb belt ? TC? - Split elastic and electronic sanding pad (56 graduation) - Electronic thickness adjuster SMART CONTROL S electronic control 10-inch color LCD touchscreen Motor power 15 kW

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60

Panel thickness 8 (13) ÷ 60 mm Rolls 0.4 ÷ 3 mm Strip edge thickness 0.4 ÷ 8 mm (12 mm optional) Feed speed 10 ÷ 18 m/min The FLEXA 507 automatic edge banding machine offers optimal solutions for all edge banding requirements. The flexible configuration options, the option to equip the machine with controlled axes in the XE version and the high feed speed make the Flexa 507 an extremely versatile modern machine. The extremely robust design and precise assemblies ensure the highest precision and

Joining unit with slide cutter  Non-stick Spray Unit Automatic stripping and roll loading station Glue application with roller  Alternating basin for Pu glue (tot 2 basins)  Cross-cut and corner saw unit Eboning unit at the top bottom with nesting units Wing Scraper  Edge scraper blade with nesting unit  Buffing unit Machine length 315 cm  Sheet material from 8 to 50 mm on roll edge material from 0.4 to 3 mm Strip material from 0.5 to 5 mm

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.

Automatic spindle moulder CASADEI mod. MATRIX 5 (4+UNIVERSAL) - CE rules - Year 2005 - Composition: Horizontal bottom Vertical right Vertical left Horizontal top Universal - Total installed power Kw 31,9

Code: 0300 Brand: CASADEI INDUSTRIA Model: V320 - CE Standard Automatic edge bander for pre-glued edges, for carpentry, furniture, custom-made furnishings, doors, panels and various items - CE Standard Features: Automatic upper feeder with toothed belt, speed 5 mt/min, height adjustable by means of handwheel with numerical position indicator Infeed guide Pneumatic coil cutting shear Automatic front and rear pneumatic end trimmer Upper/lower end trimmers at 11000 rpm with cutters Z4 Work surface 1800 mm with 7 adjustable rollers and polyzene slide guides Extendable front support for large panels Technical data: Min/max panel thickness 10-45 mm Edge thickness in coil 0,4-2 mm Min panel length 220 mm Min panel width 110 mm Gluing unit: Blower power LEISTER W 3400 - Temperature adjustment Total installed power 2 kW Suction port diameter 120 mm Overall dimensions m ...

Table dimensions: 1100 x 750 mm Motor output: 5 kW Spindle diameter: 30 mm reus: 2900/4400/6000/8000 U/min Weight: 500 kg Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This CASADEI Bordatrice E350PM was manufactured in 2022. It features a panel height range of 10-45 mm and supports edge band thickness from 0.4 to 2 mm. The machine operates at a feed belt speed of 7 m/min, with a glue pot heating power of 1490 W. Consider the opportunity to buy this CASADEI Bordatrice E350PM edgebander. Contact us for more information.

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

working width: 510 mm; cutter head: Streifenmesser; number of blades: 4; surface table length: 2000 mm; fence tilting: ja; surface table fold up: manuell; maxilum thickness planing height: 230 mm; height adjustment thickness table: electric; read out table height: digital; feed speed: 7 / 14m/min; infeed roller: Stahl; outfeed roller: stahl; pressure beam: durchgehend; table roller: ja; motor power: 5,5 kW; motor brake: ja; suction connection: 160mm; machine legth: 2200 mm; machine width: 950 mm; weight: 800;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Hold-down: manual; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

Cast iron table Lateral tenoning carriage Spindle diameter 50 mm. Table 110 x 90 cm Support rail in the front Motor 4 kW 5 spindle speeds: 2900 - 4400 - 6000 - 8000 - 10000 tr/min

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Four-sided planer Casadei C4 Working width 220mm Working height 120mm Number of spindles 4 Spindle layout: 1.Lower 4kw 2.4kw rights 3.Left 4kw 4.Upper 4kw Spindle speed 6000r.p.m Feed speed adjustable by variator 4-21m/min Tool size 125-140mm Cardan shaft driven feed Technical documentation

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

ROUTER type SCM R9

The model M3 differs from the offered multi-blade and surround circuits by its solid and compact design, as well as by the simplicity in operation. Each individual machine element is able to withstand high workloads without risks while constantly utilizing the respective full engine power. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 390 Feed speed m/min 6-48 Engine power PS 35 25,5 KW CONNECTED LOAD 58 AMPER The highest application security available on the market is achieved by SCM's exclusive system. The backfall protection of the workpiece and the protection against splinters during processing ensure maximum safety. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 250 Feed speed infinitely variable rpm 6-48 Engine power kW (HP) 18,5 (25)

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

surface planer , thickness planer , spindle moulder . machines SCM L'Invincibile second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 l'Invincibile : useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 surface planer model SCM F52 l'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 l’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50

calibrating sanding machine SCM SANDYA 16S - 135 second hand machine carpet in rubber max. working width mm. 1350 machine composed by 2 belts : 1° belt : roller in rubber diam. mm.200 . shore 80 2° belt : combined roller in rubber diam. mm.160 . shore 35 + electronic pad belts size mm. 2620 x 1370 motor power Hp 20 volt. 380/50

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

CNC machining centers for drilling, staping, milling, wedge grooves. Working range: 4400 x 300 mm Max working width mm: 210 Max material thickness mm: 100

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

Wide belt sander SCM Sandya 40 M1 year of construction 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table       Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disc brake Rubber coated pressure rollers Automatic carpet centring Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Type Z.32c Ser. Nr. 040306 Cutting length 3200 mm Cutting width 3200 mm Max. saw blade protection 80 mm Compressed air pressure 6 bar Main motor 7,5 kW Max. saw blade feed speed 13.5-27 m/min Air cushion tables 4 Scoring unit 1,5 kW Made in Italy Weight 2880 kg

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

CIRULAR SAW type SCM SI 400 EP NEW machine . prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - manual, semiautomatic and automatic mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50 YEAR 2022

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

M.Nr. AE/030883 Year of Make: 2007 Motor data: 380 V - 50 Hz - 38 A Type: SEZ. MON. E Cutting dimensions: 3200 mm x 3200 mm Scoring Weight approx.: 2400 kg Equipment: 1 x Front fixed table with guide 1500×600 mm, air cushion 2 x Front fixed table 1500×400 mm, air cushion Automatic switching off of the scoring saw blade Main saw blade motor 7.5 kW (10 hp) Star-delta start-up for main saw blade motor Groove design with manual adjustment of the main saw blade 3D simulator on the machine Graphical editor Cutty – Cut Optimization Software PC Machine feet / pedestals Electrical equipment A.E.V400/50 "N" with microswitch, scoring cut-off, 0YD, grooves

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

Code: 0327 Brand: SCM Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Weight kg 680 MACHINE NOT RECONDITIONED , SEEN AND LIKED UNDER THE CONDITION IN WHICH IT IS FOUND , WITHOUT ANY WARRANTY

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Thicknesser SCM S520 Working width 520mm Working height 250mm Feed speed adjustable: 4 degrees Shaft with traditional knives 4-knife shaft Power 4kw Weight: 670kg

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit

Key data: 520 , 9

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

Key data: 2500 mm, 1240 mm, 200 mm

CNC Machining Center SCM Type Z 25 PLUS R4R4 Year of manufacture 2005 Working range X between stops 2500 mm Vertical bores Y 1018 mm Milling Y 1240 mm Plate throughput maximum 180 mm Maximum panel thickness Z = 100 mm Stroke Z axis 200 mm Central lubrication at the top and bottom Drilling unit with 15 vertical spindles 6 horizontal spindles, 4 in the X direction and 2 in the Y direction Spindle speed 4000 rpm. Motor power spindle rotation 2.2 kW Travel speed of the X-Y axes 42.4 m/min. Travel speed Z axis 11.5 m/min. Main spindle approx. 6.6 kW Maximum speed of the main spindle 24000 rpm. Front tool changer with 4 tool holders Rear tool changer with 4 tool holders Rectangular Vacuum Cups 16 Pieces Tool holder HSK 63 Compressed air 6/7 bar, compressed air consumption 150 l Vacuum pump 40 m³/h 3/3.6 kW Air intake speed 30 m/h Suction nozzle diameter 160 +  ...

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

SCM Spindle Moulder Model T150 with Tilting Shaft - spindle moulder shaft inclination -10 / +45 degrees - spindle moulder shaft diameter 35mm - max tool diameter with profile guide 250mm - maximum tool diameter that can be retracted under the table 320mm - "Fast" sector table for optimizing the support of the piece under the tool, adjustable from the outside, as an alternative to the table rings Machine with: Flat "LL" version with 2 profile extensions - length 2500mm, complete with adjustable front support bar for large pieces, and with emergency button Guide and spindle moulder shaft with electronic programming Complete with: - Hanging control panel - total excludability of the guide from the plane - 3-axis microprocessor electronic programmer for automatic programming of the different Positions : spindle moulder height Spindle moulder tilt Positioning gui ...

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)

Code: 0344 Brand: SCM MINIMAX Model: FS 41/C - CE Standard 3 Works combined machine (Surface/ Thickness/Mortiser)) for wood, carpentry, furniture, window frames , doors, plastics, and various - CE Standard Technical data: Planer shaft with n° 3 Tersa” knives Working width 410 mm Total length of surface tables 2000 mm Guide inclination 90–45° Thickness table dimensions 410 x 605 mm Thickness feed speed 7 m/min Thickness min/max working height 3/230 mm Three-phase motor 6,5 Hp Cast iron mortiser: table dimensions 430 x 220 mm Spindle connection diameter 16 mm Wheels for moving the machine Suction port diameter 120 mm Overall dimensions mm 2000 x 1000 x 1100 h Weight kg 340

SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...

Spare parts of the SCM group directly from Italy

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools