sandvik ボーリングミルとマシニングセンター 中古 販売のため

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: - mm Shipping weight: 22 kg Packing: ? mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter -Handover in the current condition as seen -Condition: see pictures (not complete) -Diameter: 325mm -Inserts: Carbide -Intake: SK50 -Dimensions: 325/325/H210 -Weight: 28.8kg

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Sandvik Coromant milling holder SK45 -Type: 390.140-45 50 027 -Dimension: O83 x 140 mm -Weight: 1.7 kg

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Sandvik Costa, rotating centering point, centering cone flattened -Recording: MK5 -Model: A-5-65085 -Dimensions: Ø 110 x 275 mm -Weight: 6.4 kg

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

amount: 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Tool holder, milling chuck, collet chuck, milling tool, adapter, clamping unit, tool holder -Manufacturer: Sandvik Coromant / Komet, 57 pieces SK50 clamping units -Various types: see photos, more pictures available upon request -Type/Quantity: see photo parts list -Price/Sale: complete -Transport dimensions: 600/500/H500 mm Total weight: 210 kg

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in current condition as seen -Condition see pictures -Manufacturer: Sandvik Coromant, face milling cutter head shell milling cutter Ø 113 mm -Type: R260.22-100Q32-12H -Intake: SK50 -Dimensions: Ø 113 x 225 mm -Weight: 5.5 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, Secodex face milling cutter head shoulder milling cutter -Type: R290-160Q40-12M 848471 -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 160 x 60 mm -Weight: 3.9 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 31.7 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head, shoulder milling cutter -Type: R 282.2 160 -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160 x 62 mm -Weight: 4.9 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, cutter head milling cutter -Type: R260.22-080-15 -Hole: Ø 27 mm -Dimensions: Ø 90 x 50 mm -Weight: 1.3 kg

Milling cutters, End mills, drop cutters, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

BR20 , Sandvik As good as new, see photos!