optimum ボーリングミルとマシニングセンター 中古 販売のため

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7825 Type: OPTIturn D560 x 2000 Producer: OPTIMUM Created: 2011 Parameters: Maximum turning diameter over bed: 560 mm Maximum turning diameter over support: 355 mm Maximum spindle speed: 1500 1/min Maximum workpiece weight: 500 kg Clamping diameter (sub-spindle): 315 mm Motor power: 7.5 kW Length: 3340 mm Width: 1150 mm Height: 1430 mm Weight: 2720 kg

x-travel: 750 mm y-travel: 230 mm z-travel: 360 mm total power requirement: 5 kW weight of the machine ca.: 1.3 t required space: 1.65x1.3x2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7877 Type: TH 4010 Producer: OPTIMUM Created: 2018 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 410 mm Minimum spindle speed: 45 1/min Maximum spindle speed: 1800 1/min Cone: MK 3 Rotary spindle pass-through diameter: 52 mm Power consumption: 1.5/2.4 kW Length: 1920 mm Width: 740 mm Height: 1222 mm

bore capacity in steel (diameter): 13 mm throat: 235 mm bore stroke: 60 mm spindle taper: B 16 spindle turning speed - stepless: 100-3000 U/min table surface area: 290x270 mm column diameter: Ø 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): Ø 25 mm throat: 209 mm bore stroke: 95 mm turning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mm distance spindle /table: 770 mm spindle turning speed range: 200-2440 U/min total power requirement: 0,75 kW weight of the machine ca.: 105 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mm saw band length: 2480 mm cutting width: max. 245 x 150 mm voltage: 230 V power capacity: 1,5 kW dimensions of saw-band: 2480 x 27 x 0,9 mm mitter cutting: 0 - 60 ° cutting speed: 20 - 90 m/min weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg

x-travel: 580 mm y-travel: 200 mm z-travel: 340 mm speeds: 115 - 1750 U/min table surface area: 1000 x 240 mm tool taper: ISO 40 total power requirement: 4,5 kW weight of the machine ca.: 820 kg dimensions of the machine ca.: 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with mic ...

Optimum Optidrill DH 32GSV Admission in drilling-spindle (morse): Mk3 Max drill capacity: 30 mm Table dimensions: 420 x 400 mm SPEEDS: 40 > 3000 rpm Max drilling depth: 125 mm Motorpower: 2,2 kW Length: 820 mm Depth : 450 mm Height: 2230 mm Weight: 324 kg

thickness of jaw: 127 mm clamping width: 0 - 208 in 3 Stufen mm clamping capacity: 4000 kg total power requirement: manuell kW weight of the machine ca.: 52 kg dimensions of the machine ca.: 670 x 151 ( L x H ) mm Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter of brush: Ø 250 mm width of brush: 40.0 mm turning speed range: 2850 U/min voltage: 400 Volt total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 36.0 kg dimensions of the machine ca.: 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range  ...

Band Saw Optimum S300 VG BJ 2000

throat: 180 mm quill stroke: 80 mm continious capacity: 20 spindle taper: MK 2 table-size: 280 x 245 mm height of the machine: ca. 1000 m column diameter: 73 mm distance spindle /table: max. 425 mm dimensions: ca. 615 x 330 x 1015 mm weight: ca. 60 kg incl. vice HM Müller HT100P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.

bore capacity in steel (diameter): 28 mm throat: 200 mm bore stroke: 105 mm table surface area: 360x340 mm Distance spindle/table max.: 540 mm turning speed range - stepless: 120-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle:: turning speed range - main spindle: 10 - 10.000 min/-1 power capacity - main spindel: 11 / 7,5 kW max. Torque: 70 / 48 Nm tool taper: BT 40 work table:: table surface area: 800 x 320 mm max. table load: 300 kg T-slots: 3x 14 x 100 mm distance spindle /table: 100 - 600 mm Tool-Presetter:: number of toolpositions: 12 pos. tool taper: BT 40 max. tool diameter: 70 mm max. tool weight: 6,0 kg change-time tool to tool: 7,0 sec feeds:: rapid traverse ( X / Y / Z ): 10 m/min feed speeds: max. 10.000 mm/min repeating accuracy: +/- 0,008 mm positioning accuracy: +/- 0,01 mm total power requirement: 15 kVA weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3,5 x 2,5 x 2,4 m Documents: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo  ...

A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible.

turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 360 mm centre height: 180 mm turning speeds: 70-2400 U/min total power requirement: 2,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 2000x1500x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.

A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible.

Drill Optimum B32, good condition, incl. MK4 mount, 225 mm stop, 125 mm quill strokePrices subject to change, errors, printing and typesetting errors excepted

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

cutting diameter: max. 225 mm saw band length: 2.480 mm width of saw-band: 27 mm dimensions of saw-band: 2.480 x 27 x 0,9 mm cutting angle: 0 - 60 ° band speed: 20 - 90 m/min Cuttingrange 90°: max. 225 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 150 x 245 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 120 x 90 mm capacity 45 degrees: round: 145 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: flat: 190 x 150 mm total power requirement: 1,5 kW weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,5 x 1,2 x 1,6 m Documents: Saw Bands: 1x Coolantsystem: Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information.

Milling machine Optimum Optimil F 105

x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm table-size: 820 x 320 mm tool adaptor: BT 40 turning speed range: 10000 U/min power requirement: 11 kW Control: Sinumerik Steuerung 828D rapid traverse Z-axis: 1500 mm/min rapid traverse X- and Y-axis: 1500 mm/min workpiece weight: 300 kg no. of tools in the magazine: 12 Stück dimensions: 2164 x 1860 x 2200 mm weight of the machine ca.: 2800 kg immediately available - Siemens Sinumerik control 828D with 15.6 inch touch display - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation in all axes for high payloads - High-torque servo drives, directly connected to the ball screw in all three axes three axes - Precision-ground, preloaded high-performance recirculating ball screw (á 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopi ...

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

capacity 90 degrees: round: 115 mm capacity 90 degrees: flat: 100 x 150 mm band saw dimensions: 1638 x 13 x 0,65 mm : 20/29/50 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.