microstep 板金加工 中古 販売のため

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

This 3-axis MicroStep AquaCut-W 4001.20 was manufactured in 2018. It features a working range of 4,000 x 2,000 mm and is equipped with a high-pressure pump system capable of 400 MPa. The machine includes automatic height control for the cutting head and a waterjet cutting table with grid support. If you are looking to get high-quality waterjet cutting capabilities, consider the MicroStep AquaCut-W 4001.20 machine we have for sale. Contact us for further details.

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

CNC Portal Flame Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Make: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transmission Parameter database iMSNC control / Windows® "AsperWin-Basic" programming system, for programming directly on the machine control system Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for graining) via plasma source Module "THC" / Automati ...

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

Find more here - / Contact us at -

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...

Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

Manufacturer: MicroStep Model: MSF 4001.25L Type of Machine : CNC Cutting System Features: - 2D laser cutting head with IPG fiber laser source YLS 4000 - Fully automatic change table - Automatic loading and unloading system MSLoad Technical Data: - Working Area: approx. 4,000 x 2,500 mm - Guides: High-precision linear guides - Drive: Maintenance-free Panasonic AC servo motors - Positioning Speed: Up to 130,000 mm/min - Measurement System: IRC 2500 (incremental encoder) - Z-axis Positioning Speed: 18 m/min - Z-axis Travel Range: 150 mm - Z-axis Acceleration: 0.75 G - Positioning Accuracy (Pa): 0.07 mm (according to VDI/DGQ 3441) - Repeatability (Ps): 0.03 mm (according to VDI/DGQ 3441) - Ambient Temperature: +10 °C to +35 °C - Relative Humidity: 0% to 90% --------------------------------------------------------------- Find more here - / Contact us at -

Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request

CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm

Laser cutting machine Type: MSF 4001.20Ltk+T500 4kW IPG Manufacturer: MicroStep Year: 2016 Working area: 4000 x 2000mm + space for pipe cutting Laser: 4000 W IPG Linear guides Rexroth Gear racks Precision helical gears ATLANTA on all axes, double-sided driven portal STOBER gearboxes Drives maintenance-free, processor-controlled AC-servos Panasonic Max. positioning speed 130 m/min - one axis, 180 m/min simultaneously 2 axes. Acceleration 10 m/s2 Z-axis positioning speed 50 m/min Z-axis travel 150 mm Z-axis acceleration 0.75 G Position deviation Pa 0.07 mm in accordance with VDI/DGQ 3441 Repeat return accuracy Ps 0.03 mm in accordance with VDI/DGQ 3441 Ambient operating temperature +10 °C to +35 °C Relative humidity 0 to 90 % Machine in very good condition, under power Find more here - / Contact us at -

table length: 4000 mm table width: 2000 mm burner heads: 1 laser capacity in Watt: 4 kW Capacity steel: mm Control: MicroStep total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Working area: 4000 x 2000 mm + additional space for pipe cutting - Linear guides: Rexroth - Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes - Gearbox: STOBER - Drives: Maintenance-free, processor-controlled AC servos from Panasonic - Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously). Acceleration 10 m/s² Positioning speed of the Z-axis 50 m/min Travel distance of the Z-axis 150 mm Acceleration of the Z-axis 0.75 G Position deviation Pa 0.07 mm according to VDI/DGQ 3441 Repeatability Ps 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Machine in very g ...

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of Make: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with power source Hypertherm XPR300 incl. Optimix gas console 1 x drilling spindle 26 kw to 40 mm diameter, incl. 8-fold tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Availability: May 2026

MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine.

This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information.

This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine.

This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 2500 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.

Inv. Num. : 9040 Type: EasyCut 9001.30 PG Producer: MicroStep Created: 2015 Parameters: Work table length: 9000 mm Work table width: 3000 mm Plasma Source: Formica ForCUT 163WDM

This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information.

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of construction: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O²,N²) 1 x TEKA filter system outdoor installation 1 x nesting program on the machine control Availability: immediately

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Manufacturer: MicroStep Model: MSF Compact 1501.30L Type: CNC Fiber Laser Cutting Machine Year of Manufacture: 2020 Laser Source: IPG YLS-3000-U Laser Power: 3.0 kW Working Area: 1500 x 3000 mm Maximum Material Thickness: 10 mm stainless steel Power Supply: 3L+N+PE AC 400/230 V / 50 Hz Rated Current: 20 A Weight: 500 kg Protection Class: IP 54/20 Standard: IEC 61439-1 Condition: Used Find more here - / Contact us at -

Inv. Num. : 9119 Type: DRM Max 3001.30PrkGb Producer: MicroStep Created: 2024 Parameters: The machine is in good condition.

The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...

This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information.

Oxy-fuel cnc cutting machine. Prestine condition.

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

Inv. Num. : 9120 Type: MSF 4001.20Ltk T500 Producer: MicroStep Created: 2016 Parameters: Laser ON: 24000 h Beam ON: 22250 h Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 20 mm Source: IPG YLS 4000W Cutting head: HIGHYAG BIMO FSC-MZ2.1 Machine height: 2570 mm Machine length: 10785 mm Machine width: 4508 mm Machine weight: 14689 kg

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Max plate size 1600x3000 mm Drilling heads 1 Drilling tools per head 6 Max drilling diameter 40 mm Max drilling thickness 130 mm Spindle speed 3000 rpm Plasma torches 1

Sheet metal processing system P 315 / 1991 105327 Ai P4-1812+HPT 2015 + R51 272/ 1991 S4.30 / 1998 Find more here - / Contact us at -

Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

material width: 1015 mm material thickness: 1 mm speed: von Hand weight: 240 Kg dimensions: 1420 x 600 x 750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bystronic Model: BLT 4000 Year of Manufacture: 2001 Type of Machine : C02 Laser Find more here - / Contact us at -

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - / Contact us at -

Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - / Contact us at -

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

Manufacturer: Durma Model: MS 2003 Type: Guillotine shear Year of Manufacture: 2014 Find more here - / Contact us at -